Features References

Next: About this document Up: Mike Pratt's Features Bibliography Previous: Mike Pratt's Features Bibliography

References

AC90a: D. C. Anderson and Chang T. C. Automated process planning using object-oriented feature-based design. In F.-L. Krause and H. Jansen, editors, Advanced Geometric Modelling for Engineering Applications. North-Holland Publishing Co., 1990. (Proc. GI/IFIP International Symposium, Berlin, Germany, 8-10 Nov. 1989).
AC90b: D. C. Anderson and T. C. Chang. Geometric reasoning in feature-based design and process planning. Computers & Graphics, 14, 2, 225 -- 235, 1990.
ACdP84: G. T. Armstrong, C. G. Carey, and A. de Pennington. Numerical code generation from a geometric modeling system. In M. S. Pickett and J. W. Boyse, editors, Solid Modelling by Computers, pages 139 -- 157. Plenum Press, New York, NY, 1984. (Proc. General Motors Solid Modeling Symposium, Warren, Michigan, Sept. 1983).
ACLM82: F. Arbab, D. G. Cantor, L. Lichten, and M.A. Melkanoff. The MARS CAM-oriented modeling system. In CAD/CAM Technology in Mechanical Engineering. MIT Press, 1982. (Proc. Conf. at Massachusetts Institute of Technology, Cambridge, MA, March 1982).
ADFF86: S. Ansaldi, L. De Floriani, and B. Falcidieno. Form feature representation in a structured boundary model. Image Analysis & Processing, ?????, 19 -- ??, 1986.
AF88a: S. Ansaldi and B. Falcidieno. Form feature representation and recognition in a structured boundary model. In M. J. Wozny, H. W. McLaughlin, and J. Encarnaçao, editors, Geometric Modeling for CAD Applications. North-Holland Publishing Co., 1988. (Proc. IFIP WG5.2 Working Conf., Rensselaerville, NY, May 1986).
AF88b: S. Ansaldi and B. Falcidieno. The problem of form feature classification and recognition in CAD/CAM. In R. A. Earnshaw, editor, Theoretical Foundations of Computer Graphics and CAD. Springer-Verlag, 1988. (Proc. NATO Advanced Study Institute, Il Ciocco, Italy, July 1987; NATO ASI Series, Vol F40).
AF90: S. Ansaldi and B. Falcidieno. Extracting and completing feature information in process planning application. In M. J. Wozny, J. U. Turner, and K. Preiss, editors, Geometric Modeling for Product Engineering. North-Holland Publishing Co., 1990. (Proc. IFIP WG5.2/NSF Working Conf., Rensselaerville, NY, Sept. 1988).
AGP91: R. Anderl, H. Grabowski, and M. J. Pratt, editors. Advanced Modelling for CAD/CAM Systems. Springer-Verlag, 1991.
Ail89: H. Ailisto. Use of design data in 3D vision-based inspection. In Proc. SCIA '89, 1989. Proc. 6th Scandinavian Conf. on Image Analysis, Oulu, Finland, 19-22 June 1989.
All93: G. Allen. Tolerances and assemblies in CAD/CAM systems. ASME Manufacturing Review, 6, 4, 320 -- 328, 1993.
Ame88: A. L. Ames. Automated generation of uniform group technology part codes from solid model data. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988. American Society of Mechanical Engineers, New York, NY, 1988.
Ame91: A. L. Ames. Production ready feature recognition based on automatic group technology part coding. In J. Rossignac and J. U. Turner, editors, Symposium on Solid Modeling Foundations and CAD/CAM Applications. Association for Computing Machinery, New York, NY, 1991.
AP75: A. P. Ambler and R. J. Popplestone. Inferring the positions of bodies from specified spatial relationships. Artificial Intelligence, 6, 2, 157 -- 174, 1975.
Arm82: G. T. Armstrong. A Study of Automatic Generation of Non-invasive NC Machining Paths from Geometric Models. PhD thesis, Dept. of Mechanical Engineering, University of Leeds, October 1982.
AZ89: L. Alting and H. Zhang. Computer aided process planning: The state-of-the-art survey. Int. J. Production Research, 27, 4, 553 -- 585, 1989.
B91: J. T. Berry et al. Computer aided design for casting and solidification technology. In Proc. 1991 SME/NSF Conf. on Design & Manufacturing Systems, Austin, TX, Jan. 1991, 1991.
BAL91: D. F. Baldwin, T. E. Abell, M.-C. Lui, T. L. De Fazio, and D. E. Whitney. An integrated computer aid for generating and evaluating assembly sequences for mechanical products. IEEE Trans. Robotics & Automation, 7, 1, 78 -- 94, 1991.
BB90: A. Bernard and P. Bourdet. Features: A new approach to improve productivity in the realisation of forging die prints. J. Materials Processing Technology, 24, ????, 97 -- 104, 1990.
BBP92: M. Botkin, D. Bajorek, and M. Prasad. Feature-based structural design of solid automotive components. In Proc. 4th International Conf. on Design Theory & Methodology. American Society of Mechanical Engineers, New York, NY, 1992.
BBWS90: F. Bauert, W. Beitz, E. Weise, and N. Salem. Modeling methods for a flexible computer aided embodiment design system. Research in Engineering Design, 2, 15 -- 34, 1990.
BC88: A. H. Bond and K. J. Chang. Feature-based process planning for machined parts. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988. American Society of Mechanical Engineers, New York, NY, 1988.
BC89: A. H. Bond and K. J. Chang. Subplanning methods for process planning. In Proc. 1989 Computers in Engineering Conf. American Society of Mechanical Engineers, New York, NY, 1989.
BD86: J. Brimson and P. Downey. Feature technology: A key to manufacturing integration. CIM Review, Spring 1986, 21 -- 27, 1986.
BF88: A. Bhadra and G. W. Fischer. A new GT classification approach: A database with graphical dimensions. ASME Manufacturing Review, 1, 1, 44 -- 49, 1988.
BFC: T. O. Binford, L. Frants, and M. R. Cutkosky. Representation and propagation of tolerances for CAD/CAM systems. In ??????????, editor, ?????????, ???? (Proc. IFIP WG5.2 Workshop on Geometric Modeling, Rensselaerville, NY, June 1990).
BGJ94: P. Béziat, Y. Gardan, and J.-P. Jung. A constraints management system: Model and dialog. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
Bha88: A. S. Bhatnagar. Implementation of feature mapping and reasoning shell with application to group technology coding. Master's thesis, Arizona State University, August 1988.
BHR89: R. E. Billo, M. R. Henderson, and R. Rucker. Applying conceptual graph inferencing to feature-based engineering analysis. Computers in Industry, 13, 3, 195 -- 214, 1989.
BHW87: S. L. Brooks, K. E. Hummel, and M. L. Wolf. XCUT: A rule-based expert system for the automated process planning of machined parts. In Proc. ASME Winter Annual Meeting, Boston, MA, Dec 1987. American Society of Mechanical Engineers, New York, NY, 1987. (ASME Publication PED-25, pp. 181 -- 194).
Bil89: R. E. Billo. An Object-oriented Modeling Methodology utilizing Conceptual Graphs for Form Feature Definition. PhD thesis, ????? Arizona State University, Tempe, AZ, 1989.
BJ88: A. H. Bond and R. Jain. The formal definition and automatic extraction of group technology codes. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988. American Society of Mechanical Engineers, New York, NY, 1988.
BJ93: W. F. Bronsvoort and F. W. Jansen. Feature modelling and conversion -- key concepts for concurrent engineering. Computers in Industry, 21, 1, 61 -- 86, 1993.
BJ94: W. Bronsvoort and F. Jansen. Multi-view feature modelling for design and assembly. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 315 -- 330. Elsevier Science B.V., 1994.
BK86: H. R. Berenji and B. Khoshnevis. Use of artificial intelligence in automated process planning. Computers in Mechanical Engineering, 5, 2 (Sept 1986), 47 -- 55, 1986.
BK88: J. R. Boerma and H. J. J. Kals. FIXES, a system for automatic selection of set-ups and design of fixtures. Ann. CIRP, 37, 1, 443 -- 446, 1988.
BK89: J. R. Boerma and H. J. J. Kals. Fixture design with FIXES: The automatic selection of positioning, clamping and support features for prismatic parts. Ann. CIRP, 38, 1, 399 -- 402, 1989.
Blo84: D. Blore. Computer aided process planning. Computers in Mechanical Engineering, May, pp. ????, 1984.
BM92: Ø. Björke and O. Myklebust, editors. IMPPACT: Integrated Modelling of Products and Processes using Advanced Computer Technologies. Tapir Publishers, Trondheim, Norway, 1992. (Final report of ESPRIT II Project No. 2165, IMPPACT).
Boe90: J. R. Boerma. The Design of Fixtures for Prismatic Parts. PhD thesis, University of Twente, The Netherlands, 1990.
BP89: N. S. Bernstein and K. Preiss. Representation of tolerance information in solid models. In Proc. 1989 Design Automation Conf. American Society of Mechanical Engineers, New York, NY, 1989. (Conf. held in Montreal, Canada, Sept 1989).
BPB93: A. D. Bowyer and S. Parry-Barwick. Woodwark's method for feature recognition. Computer Aided Design, Submitted for publication, 1993.
BR87: P. Brown and S. Ray. Research issues in process planning at the National Bureau of Standards. In Proc. 19th Intl. Seminar on Manufacturing Systems, June 1987. ????, 1987. (WHERE? WHO?).
Bra82: I. C. Braid. Form features and generic shapes, Feb. 1982. Shape Data Ltd., report to CAM-I Geometric Modeling & Advanced Numerical Control Projects.
Bra90: T. A. Brand. Increased flexibility in a feature-based design environment. Master's thesis, Rensselaer Design Research Center, Rensselaer Polytechnic Institute, Troy, NY, 1990. (RDRC Technical Report 90039).
Bro93: C. W. Brown. Feature-based tolerancing for intelligent inspection process definition. In H. B. V. Srinivasan & Voelcker, editor, Proc. 1993 International Forum on Dimensional Tolerancing & Metrology, Dearborn, MI, 17 - 19 June 1993, pages 249 -- 258. American Society of Mechanical Engineers, New York, NY, 1993.
BRS88: R. E. Billo, R. Rucker, and D. L. Schunk. Enhancing group technology modeling with database abstractions. J. Manufacturing Systems, 7, 2, 95 -- 106, 1988.
Bru89: J.-M. Brun. Solid modelling schemes and solid reconstruction. In W. Strasser and H.-P. Seidel, editors, Theory and Practice of Geometric Modeling. Springer-Verlag, 1989. (Proc. Int. Conf. in Blaubeuren, Germany, Oct 1988).
Bru90: J.-M. Brun. B-Rep to CSG conversion as a feature recognition process. In F.-L. Krause and H. Jansen, editors, Advanced Geometric Modelling for Engineering Applications. North-Holland Publishing Co., 1990. (Proc. GI/IFIP International Symposium, Berlin, Germany, Nov. 1989).
Bru94: J.-M. Brun. From characteristic shapes to form features. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
BSWDM90: K. N. Brown, J. H. Sims Williams, J. Devlukia, and C. A. McMahon. Reasoning with geometry: Predicting stress concentration factors. Artificial Intelligence in Engineering, 5, 4, 182 -- 188, 1990.
BW93: W. Brandenburg and B. Wördenweber. Featuremodelling with an object-oriented approach. Computing, Supplement 8, 43 -- 57, 1993. (Proc. Geometric Modelling Seminar, Schloss Dagstuhl, Germany, July 1991; published as Geometric Modeling, eds. G. Farin, H. Hagen & H. Noltemeier, Springer-Verlag).
BW94: S. L. Brooks and M. L. Wolf. Overview of Allied Signal's XCUT system. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 399 -- 422. Elsevier Science B.V., 1994.
C88: U. Cugini et al. Towards automatic indexing of product models in a CIM environment. Proc IEEE Workshop on Languages for Automation, University of Maryland, 29 -- 31 Aug 1988, 1988.
C89: B. Charles et al. Toward a computer-aided functional tolerancing model. Proc. Intl. Conf on CAD/CAM & Advanced Manufacturing Technology, Jerusalem, Israel, 11-14 Dec 1989, 1989.
C90: P. H. Cohen et al. Attribute-based group technology system. In Proc. SME Autofact Conf., Detroit, MI, Nov. 1990. Society of Manufacturing Engineers [WHERE?], 1990.
CA89a: K. Case and B. S. Açar. Learning studies in the use of computer aided design systems. Behaviour & Information Technology, 8, 5, 353 -- 368, 1989.
CA89b: K. Case and B. S. Açar. The manufacturing features approach to design and its impact on the learning and use of computer aided design systems. In E. D. Megaw, editor, Contemporary Ergonomics 1989. Taylor & Francis, London, 1989.
CAB89: Y.-C. Chou, D. C. Anderson, and M. Barash. A mathematical approach to automatic configuration of machining fixtures: Analysis and synthesis. ASME J. Engineering for Industry, 111, 299 -- 306, 1989.
Cab90: J. Cabadaj. Theory of computer aided fixture design. Computers in Industry, 15, 1&2, 141 -- 147, 1990.
CAM80: CAM-I. CAM-I's illustrated glossary of workpiece form features. Technical Report R-80-PPP-02.1, Computer Aided Manufacturing International, Inc., Arlington, TX, 1980.
CAM81: CAM-I. Preliminary study of the requirements for the incorporation of dimensions and tolerances in a geometric model. Technical Report R-81-GM-03, Computer Aided Manufacturing International, Inc., Arlington, TX, 1981.
CAM82: CAM-I. Design of an advanced numerical control processor. Technical Report R-82-ANC-01, Computer Aided Manufacturing International, Inc., Arlington, TX, 1982.
CAM85a: CAM-I. Dimensioning and tolerancing final report. Technical Report R-85-GM-02.2, Computer Aided Manufacturing International, Inc., Arlington, TX, 1985.
CAM85b: CAM-I. Requirements for support of form features in a solid modeling system. Technical Report R-85-ASPP-01, Computer Aided Manufacturing International, Inc., Arlington, TX, 1985.
CAM85c: CAM-I. Volume decomposition algorithm --- final report. Technical Report R-85-ANC-01, Computer Aided Manufacturing International, Inc., Arlington, TX, 1985.
CAM86a: CAM-I. Dimensions and tolerances feasibility demonstration. Technical Report PS-86-ANC/GM-01, Computer Aided Manufacturing International, Inc., Arlington, TX, 1986.
CAM86b: CAM-I. Features extraction and process planning. Technical Report R-86-GM/PP-01, Computer Aided Manufacturing International, Inc., Arlington, TX, 1986.
CAM86c: CAM-I. Part features for process planning. Technical Report R-86-PPP-01, Computer Aided Manufacturing International, Inc., Arlington, TX, 1986.
CAM86d: CAM-I. Reconciliation of design and manufacturing requirements for product description data using functional primitive part features. Technical Report R-86-ANC/GM/PP-01.1, Computer Aided Manufacturing International, Inc., Arlington, TX, 1986.
CAM88a: CAM-I. The coupling of geometric modeling systems with finite element modeling. Technical Report R-88-GM-01.1, Computer Aided Manufacturing International, Inc., Arlington, TX, 1988.
CAM88b: CAM-I. Current status of features technology. Technical Report R-88-GM-04.1, Computer Aided Manufacturing International, Inc., Arlington, TX, 1988.
CAM88c: CAM-I. The modelling of assemblies for design and manufacture. Technical Report R-88-GM-02, Computer Aided Manufacturing International, Inc., Arlington, TX, 1988.
CAM88d: T. C. Chang, D. C. Anderson, and O. R. Mitchell. QTC -- an integrated design/manufacturing/inspection system for prismatic parts. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988, 1988.
CAM89: CAM-I. Functional requirements for feature-based modeling systems. Technical Report R-89-GM-03, Computer Aided Manufacturing International, Inc., Arlington, TX, 1989.
CAM90a: CAM-I. Conceptual design of feature-based modeling system. Technical Report R-90-PM-01, Computer Aided Manufacturing International, Inc., Arlington, TX, 1990.
CAM90b: CAM-I. Philosophical development of form feature concept. Technical Report R-90-PM-02, Computer Aided Manufacturing International, Inc., Arlington, TX, 1990.
CAM90c: CAM-I. Proceedings, Features Symposium, August 9-10 1990, Woburn (Boston), MA. Document P-90-PM-02, Computer Aided Manufacturing International, Inc., Arlington, TX, 1990.
Cat91: G. Catania. Form features for mechanical design and manufacturing. J. Engineering Design, 2, 1, 21 -- 43, 1991.
CB85: B. K. Choi and M. M. Barash. STOPP: An approach to CAD/CAM integration. Computer Aided Design, 17, 4, 162 -- 168, 1985.
CB89a: S. P. Carney and D. C. Brown. A continued investigation into qualitative reasoning about shape and fit. Artificial Intelligence in Engineering Design & Manufacture, 3, 2, 85 -- 110, 1989.
CB89b: S. P. Carney and D. C. Brown. A qualitative model for reasoning about shape and fit. In Proc. 4th Intl. Conf on AI in Engineering, Cambridge, UK, July 1989. ???, 1989.
CBA84: B. K. Choi, M. M. Barash, and D. C. Anderson. Automatic recognition of machined surfaces from a 3D solid model. Computer Aided Design, 16, 2, 81 -- 86, 1984.
CC91a: J. Corney and D. E. R. Clark. A feature recognition algorithm for multiply connected depressions and protrusions in objects. In Solid Modeling Foundations and CAD/CAM Applications. Association for Computing Machinery, New York, NY, 1991. (Proc. ACM Symposium, Austin, TX, June 1991).
CC91b: J. Corney and D. E. R Clark. Method for finding holes and pockets that connect multiple faces in objects. Computer Aided Design, 23, 10, 658 -- 668, 1991.
CC93a: J. Corney and D. E. R. Clark. Efficient face-based feature recognition. In J. Rossignac, J. U. Turner, and G. Allen, editors, Second Symposium on Solid Modeling and Applications. Association for Computing Machinery, New York, NY, 1993. (Proc. ACM Symposium, Montreal, Canada, May 1993).
CC93b: J. Corney and D. E. R. Clark. Face-based feature recognition: Generalizing special cases. Int. J. Computer Integrated Manufacture, 6, 1&2, 39 -- 50, 1993.
CCMY92: J. Corney, D. E. R. Clark, J. L. Murray, and Y. Yue. Automatic classification of components. In Proc. Symposium on Concurrent Engineering. American Society of Mechanical Engineers, New York, NY, 1992. (Presented at Winter Annual Meeting, Anaheim, CA, Nov 1992; Publication PED Vol. 59, pp. 85 -- 99).
CCPS88: J. C. Chung, R. L. Cook, D. Patel, and M. K. Simmons. Feature-based geometry construction for geometric reasoning. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988. American Society of Mechanical Engineers, New York, NY, 1988.
CD88: J. Cunningham and J. R. Dixon. Designing with features: the origin of features. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988. American Society of Mechanical Engineers, New York, NY, 1988.
CF88: L. Casu and B. Falcidieno. A feature-based modelling system built on top of Euler operators. Technical Report 52, Instituto per la Matematica Applicata del CNR, Genoa, Italy, 1988. (submitted to CG International 89 Conf, Leeds).
CFG91: U. Cugini, B. Falcidieno, F. Giannini, P. Mussio, and M. Protti. Task-driven descriptions of mechanical parts in a CAD system. Proc. 1st International Conf. on Artificial Intelligence in Design, Edinburgh, Scotland, Jun 1991, 1991.
CFM91: J. C. Cavendish, W. H. Frey, and S. P. Marin. Feature-based design and finite element mesh generation for functional surfaces. Advanced Engineering Software, 13, 5&6, 226 -- 237, 1991.
CH90: S.-H. Chuang and M. R. Henderson. Three-dimensional shape pattern recognition using vertex classification and vertex-edge graphs. Computer Aided Design, 22, 6, 377 -- 387, 1990.
CH91: S.-H. Chuang and M. R. Henderson. Compound feature recognition by web grammar parsing. Research in Engineering Design, 2, 147 -- 158, 1991.
Cha89: T.-C. Chang. Expert Process Planning for Manufacturing. Addison Wesley, 1989.
Cha92: C.-H. Chang. Computer-assisted fixture planning for machining processes. ASME Manufacturing Review, 5, 1, 15 -- 28, 1992.
Che89: C.-S. Chen. A form feature oriented coding scheme. Computers & Industrial Engineering, 17, 1 -- 4, 227 -- 233, 1989. (Proc. 11th Conf. on Computers & Industrial Engineering, Orlando, FL).
Chi85: M. J. Chinnery. Some feature-oriented developments to a solid modeller. Master's thesis, Dept. of Applied Computing & Mathematics, Cranfield Institute of Technology, England, 1985.
Cho82: B. K. Choi. CAD/CAM compatible, tool-oriented process planning for machining centers. UNKNOWN PROCEEDINGS, 1982.
CHR88: P. F. Chavez, M. R. Henderson, and A. Razdan. Automatic 3D finite element modeling using solid model data and AI techniques. Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988, 1888.
Chu91: S.-H. Chuang. Feature Recognition from Solid Models using Conceptual Shape Graphs. PhD thesis, Arizona State University, 1991.
CJC93: M. A. Chamberlain, A. Joneja, and T.-C. Chang. Protrusion-features handling in design and manufacturing planning. Computer Aided Design, 25, 1, 19 -- 28, 1993.
CL89: H. D. Callihan and P. J. Loyacona. From form-featured solids modeling to production. In Proc. SME Autofact Conf., Detroit, MI, 30 Oct - 2 Nov 1989. Society of Manufacturing Engineers, Dearborn, MI, 1989.
CL92: Y. Chen and N. Langrana. Restoration of CAD database and geometric feature recognition. In Proc. 4th International Conf. on Design Theory and Methodology. American Society of Mechanical Engineers, New York, NY, 1992.
CM: J. C. Cavendish and S. P. Marin. Feature-based design of automobile surfaces. In ???, editor, Mathematics in the Automotive Industry. Oxford University Press, ????? (Proc. Conf. at Warwick, England, Sept. 1989)[WHEN PUBLISHED?].
CM89: A. Cheikh and P. F. McGoldrick. Functional tolerancing in CAD/CAM. Proc. Intl. Conf on CAD/CAM & Advanced Manufacturing Technology, Jerusalem, Israel, 11-14 Dec 1989, 1989.
CM92a: J. C. Cavendish and S. P. Marin. Feature-based surface design and machining. IEEE Computer Graphics & Applications, 12, 5, 61 -- 68, 1992.
CM92b: J. C. Cavendish and S. P. Marin. A procedural feature-based approach for designing functional surfaces. In H. Hagen, editor, Topics in Surface Modeling. SIAM, Philadelphia, 1992.
CM94: G. K. Christensen and O. B. Mogensen. Backward form feature recognition and removal for an automatic CNC-programming system -- BCAM. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
CMG94: J. C. Cuillière, R. Maranzana, and M. Gueury. Application de techniques d'extraction de caractéristiques à la pré-optimisation de maillages tridimensionnels. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
CMV91: U. Cugini, F. Mandorli, and I. Vicini. Automatic recognition of form features in grasping and assembling field: An approach rule-based. Preprint, paper submitted to AID '91, Edinburgh, June 1991, 1991.
Coh91: P. H. Cohen. Automated fixture design. Proc. 1991 SME/NSF Conf. on Design & Manufacturing Systems, Austin, TX, Jan. 1991, 1991.
Cor93: J. R. Corney. Graph-based Feature Recognition. PhD thesis, Dept. of Mechanical Engineering, Heriot-Watt University, Edinburgh, Scotland, 1993.
CS93: A. Cunningham and R. Smart. Computer-aided parts estimation. AI Magazine, 14, 3, 39 -- 47, 1993.
CTB92: M. R. Cutkosky, J. M. Tenenbaum, and D. R. Brown. Working with multiple representations in a concurrent design system. J. Mechanical Design, 114, 515 -- 524, 1992.
CTM88: M. R. Cutkosky, J. M. Tenenbaum, and D. Muller. Features in process based design. Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988, 1988.
CW84: T.-C. Chang and R. A. Wysk. Integrating CAD and CAM through automated process planning. Int. J. Production Research, 22, 5, 877 -- 894, 1984.
CW91: J. D. Chovan and M. B. Waldron. Identifying the fundamental geometric attributes of design: An application of distinctive feature theory. In Proc. 1991 Conf. on Design Theory and Methodology. American Society of Mechanical Engineers, New York, NY, 1991. (ASME Publication DE-Vol 31, pp. 209 -- 216).
CZ92: G. Cheng and Y. Zeng. Strategies for automatic finite element modeling. Computers & Structures, 44, 4, 905 -- 909, 1992.
D91a: J.-J. Deng et al. Functionality and cost engineering. Proc. 1991 SME/NSF Conf. on Design & Manufacturing Systems, Austin, TX, Jan. 1991, 1991.
D91b: J. R. Dixon et al. Computer-based design process models and feature-based design object representations: a research progress report. In Proc. 1991 NSF Conf. on Design & Manufacturing Systems, Austin, TX, Jan. 1991. Society of Manufacturing Engineers, Dearborn, MI, 1991.
Dab94: P. Dabke. Developing a finite element analysis agent. Technical report, Stanford University, Center for Design Research, Stanford, CA 94305, February 1994.
Das91: P. G. Dastidar. A Knowledge-based Manufacturing Advisory System for the Economical Design of Metal Stampings. PhD thesis, Mechanical Engineering Dept., University of Massachusetts at Amherst, Amherst, MA, 1991.
Dau94: F. Daugy. FEMOD: A feature-based modeller architecture. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
DCS87: J. R. Dixon, J. J. Cunningham, and M. K. Simmons. Research in designing with features. In H. Yoshikawa and D. C. Gossard, editors, Intelligent CAD I. North-Holland Publishing Co., 1987. (Proc. IFIP TC5/WG5.2 Workshop on Intelligent CAD, Cambridge, MA, Oct.1987).
DD86: J. R. Dixon and C. L. Dym. Artificial intelligence and geometric reasoning in manufacturing technology. Applied Mechanics Reviews, 39, 9, 1325 -- 1330, 1986.
DD89: M. R. Duffy and J. R. Dixon. Automating extrusion design: A case study in geometric and topological reasoning for mechanical design. Computer Aided Design, 20, 10, 589 -- 596, 1989.
DDW91: X. Dong, W. R. DeVries, and M. J. Wozny. Feature-based reasoning in fixture design. Ann. CIRP, 40, 1, 111 -- 114, 1991. (Also Technical Report 91003, Rensselaer Design Research Center, Rensselaer Polytechnic Institute, Troy, NY).
DDWP86: B. J. Davies, I. L. Darbyshire, A. J. Wright, and M. W. Park. The integration of process planning with CAD/CAM including the use of expert systems. In J. A. McGeough, editor, Computer Aided Production Engineering. Mechanical Engineering Publications Ltd., Bury St. Edmunds, England, 1986. (Proc. International Conf., Edinburgh, April 1986).
Dix88: J. R. Dixon. Designing with features: Building manufacturing knowledge into more intelligent CAD systems. In Proc. ASME Manufacturing International '88 Conf., Atlanta, GA, Apl. 1988. American Society of Mechanical Engineers, New York, NY, 1988.
DL81: Y. Descotte and J.-C. Latombe. GARI: A problem solver that plans how to machine mechanical parts. Proc. 7th Intl. Joint Convention on Arttificial Intelligence (IJCAI), Vancouver, Canada ???? when ????, 1981.
DL84: Y. Descotte and J.-C. Latombe. GARI: An expert system for process planning. In M. S. Pickett and J. W. Boyse, editors, Solid Modeling by Computers. Plenum Press, New York, NY, 1984. (Proc. General Motors Solid Modeling Symposium, Warren, Michigan, Sept. 1983).
DL85: Y. Descotte and J.-C. Latombe. GARI: An expert system for process planning. Process Planning, ????, 329 -- 346, 1985.
DL91: D. Dutta and J. B. Levin. Computer-aided process planning for parallel machining. Technical Report UM-MEAM-91-11, Design Laboratory, Dept. of Mechanical Engineering & Applied Mechanics, University of Michigan, Aug. 1991.
DLL85: J. R. Dixon, E. C. Libardi, S. C. Luby, M. Vaghul, and M. K. Simmons. Expert systems for mechanical design: Examples of symbolic representations of design geometries. In Application of Knowledge-based Systems to Engineering Analysis and Design. American Society of Mechanical Engineers, New York, NY, 1985. (Proc. ASME Winter Annual Meeting, Miami, Fl, Nov. 1985); ASME Publication No. AD-10. Also published in Engineering with Computers 2, 1, 1-10.
DLN90: J. R. Dixon, E. C. Libardi, and E. H. Nielsen. Unresolved research issues in development of design-with-features systems. In M. J. Wozny, J. U. Turner, and K. Preiss, editors, Geometric Modeling for Product Engineering. North-Holland Publishing Co., 1990. (Proc. IFIP WG5.2/NSF Workshop, Rensselaerville, NY, Sept. 1988).
DM90: D. Domazet and M. Manic. Implementation of the feature-based modelling and design approach in development of the CADROT system. In Proc. YUGRAPH 90, 4th Intl. Conf. on Computer Graphics, Dubrovnik, Yugoslavia, June 1990, 1990.
dMG94: T. de Martino and F. Giannini. The role of feature recognition in future CAD systems. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
dMS89a: L. S. Homem de Mello and A. C. Sanderson. A correct and complete algorithm for the generation of mechanical assembly sequences. Technical Report CIRSSE 33, Center for Intelligent Robotic Systems for Space Exploration, Rensselaer Polytechnic Institute, Troy, NY, June 1989.
dMS89b: L. S. Homem de Mello and A. C. Sanderson. Representations of mechanical assembly sequences. Technical Report CIRSSE 32, Center for Intelligent Robotic Systems for Space Exploration, Rensselaer Polytechnic Institute, Troy, NY, June 1989.
DMS94: D. Deneux, R. Maranzana, and R. Soenen. The material angle: A part-level criterion for tool-feature extraction. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
Don88: X. Dong. Geometric Feature Extraction for Computer Aided Process Planning. PhD thesis, Rensselaer Design Research Center, Rensselaer Polytechnic Institute, 1988. (RDRC Technical Report 88029).
DPS94: P. Dabke, V. Prabhakar, and S. Sheppard. Using features to support finite element idealizations. Technical report, Stanford University, Center for Design Research, Stanford, CA 94305, February 1994.
DS92: P. Dabke and S. Sheppard. ADVANTAGE: An integrated environment for solid modeling and finite element analysis. Technical Report CDR TR 19930920, Design Division, Dept. of Mechanical Engineering, Stanford University, Stanford, CA 94305, ????1992.
DW88a: X. Dong and M. J. Wozny. Feature extraction for computer aided process planning. In Proc. 3rd International Conf. on Computer Aided Production Engineering, University of Michigan, Ann Arbor, MI, June 1988. (Also Technical Report TR 88007, Design Research Center, Rensselaer Polytechnic Institute, Troy, NY).
DW88b: X. Dong and M. J. Wozny. FRAFES: A frame-based feature extraction system. In Proc. IEEE International Conf. on Computer Integrated Manufacturing, Rensselaer Polytechnic Institute, Troy, NY, May 1988.
DW90: X. Dong and M. J. Wozny. Feature volume creation for computer aided process planning. In M. J. Wozny, J. U. Turner, and K. Preiss, editors, Geometric Modeling for Product Engineering, pages 385 -- 403. North-Holland Publishing Co., 1990. (Proc. IFIP WG5.2/NSF Working Conf., Rensselaerville, NY, Sept. 1988).
DW91: X. Dong and M. J. Wozny. A method for generating volumetric features from surface features. In Solid Modeling Foundations and CAD/CAM Applications. Association for Computing Machinery, New York, NY, 1991. (Proc. ACM Symposium, Austin, TX, June 1991).
DZL93: W. Duan, J. Zhou, and K. Lai. FSMT: A feature solid-modelling tool for feature-based design and manufacture. Computer Aided Design, 25, 1, 29 -- 38, 1993.
DZY92: W. Duan, J. Zhou, and J. Yu. Feature solid modelling tool system: FSMTS. Computer Aided Drafting, Design & Manufacturing, 2, 1, 58 -- 67, 1992.
EE94: H. A. ElMaraghy and W. H. ElMaraghy. Computer-aided inspection planning (CAIP). In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 363 -- 396. Elsevier Science B.V., 1994.
EG87: H. A. ElMaraghy and P. H. Gu. Expert system for inspection planning. Ann. CIRP, 36, 1, 85 -- 89, 1987.
Ehr86: H. Ehrig. Tutorial Introduction to the Algebraic Approach to Graph Grammars. Springer-Verlag, 1986.
EO91: O. K. Eyada and J. B. Ong. An assembly recognition algorithm for automatic tolerancing. Proc. 19th SME North American Manufacturing Research Conf., Rolla, MO, May 1991, 1991.
ES93: W. Eversheim and J. Schneewind. Computer-aided process planning --- state of the art and future development. Robotics & Computer-Integrated Manufacturing, 10, 1&2, 65 -- 70, 1993.
EW88: P. J. Englert and P. K. Wright. Principles for part setup and workholding in automated manufacturing. J. Manufacturing Systems, 7, 2, 147 -- 161, 1988.
EW89: M. Eichenberger and G. Wong. Two contrasting methods of object recognition: Geometric features and Gabor function filter values. Proc. SCIA '89, 6th Scandinavian Conf. on Image Analysis, Oulu, Finland, 19-22 June 1989, 1989.
EWE91: H. A. ElMaraghy, Z. Wu, and W. H. ElMaraghy. A tolerancing system for mechanical design. In A. Bagchi and J. J. Beaman, editors, Intelligent Design and Manufacturing for Prototyping. American Society of Mechanical Engineers, New York, NY, 1991. (Papers from Winter Annual Meeting of the ASME, Atlanta, GA, Dec. 1991), Publication PED-Vol. 50).
Fag86: D. J. Fagan. Extraction and organisation of manufacturing features from a three-dimensional cad database. Master's thesis, Purdue University, 1986.
Fau81: I. D. Faux. Preliminary study of the requirements for the incorporation of dimensions and tolerances in a geometric model. Technical Report R-81-GM-03, Computer Aided Manufacturing International, Inc., Arlington, TX, 1981.
Fau86: I. D. Faux. Reconciliation of design and manufacturing requirements for product description data using functional primitive part features. Technical Report R-86-ANC/GM/PP-01.1, Computer Aided Manufacturing International, Inc., Arlington, TX, 1986.
Fau90: I. D. Faux. Modelling of components and assemblies in terms of shape primitives based on standard dimensioning and tolerancing surface features. In M. J. Wozny, J. U. Turner, and K. Preiss, editors, Geometric Modeling for Product Engineering, pages 259 -- 275. North-Holland Publishing Co., 1990. (Proc. IFIP WG5.2/NSF Working Conf., Rensselaerville, NY, Sept. 1988).
FB89: L. De Floriani and E. Bruzzone. Building a feature-based object description from a boundary model. Computer Aided Design, 21, 10, 602 -- 610, 1989.
FD89a: S. Finger and J. R. Dixon. A review of research in mechanical engineering design, Part I: Descriptive, prescriptive and computer based models of design processes. Research in Engineering Design, 1, 51 -- 67, 1989.
FD89b: S. Finger and J. R. Dixon. A review of research in mechanical engineering design, Part II: Representations, analysis and design for the life-cycle. Research in Engineering Design, 1, 121 -- 137, 1989.
FdP91: Z. Fu and A. de Pennington. Geometric reasoning based on graph grammar parsing. In Advances in Design Automation. American Society of Mechanical Engineers, New York, NY, 1991. (ASME Publication ?????, Vol 2, pp. 13 -- 22).
FEG90: T. L. De Fazio, A. C. Edsall, R. E. Gustavson, J. A. Hernandez, P. M. Hutchins, H.-W. Leung, S. C. Luby, R. W. Metzinger, J. L. Nevins, K. K. Tung, and D. E. Whitney. A prototype for feature-based design for assembly. Technical Report CSDL-P-2917, Charles Stark Draper Laboratory Inc., Cambridge, MA, 1990.
FF88a: B. Falcidieno and B. Fossati. Representing tolerance information in feature-based solid modelling. Technical Report 51, Instituto per la Matematica Applicata del CNR, Genoa, Italy, 1988.
FF88b: L. De Floriani and B. Falcidieno. A hierarchical boundary model for solid object representation. ACM Trans. on Graphics, 7, 1, 42 -- 60, 1988.
FG87: B. Falcidieno and F. Giannini. Extraction and organisation of form features into a structured boundary model. In G. Maréchal, editor, Eurographics '87. North-Holland Publishing Co., 1987. (Proc. Conf. in Amsterdam, Aug. 1987).
FG89: B. Falcidieno and F. Giannini. Automatic recognition and representation of shape-based features in a geometric modelling system. Computer Vision, Graphics & Image Processing, 48, 1, 93 -- 123, 1989.
FG90: B. Falcidieno and F. Giannini. A system for extracting and representing feature information driven by the application context. In Proc. IEEE International Conf. on Robotics and Automation, May 1990, Cincinnati, OH. IEEE Computer Society Press, 1990.
FH90: J. C. E. Ferreira and S. Hinduja. Convex hull-based feature recognition method for 2.5D components. Computer Aided Design, 22, 1, 41 -- 49, 1990.
Fis92: R. B. Fisher. Representation, extraction and recognition with second-order topographic surface features. Image & Vision Computing, 10, 3, 156 -- 169, 1992.
Fle88: A. D. Fleming. Geometric relationships between toleranced features. In D. Kaupur and J. Mundy, editors, Geometric Reasoning. North-Holland Publishing Co., 1988. (A paper with the same title appears in Artificial Intelligence 37, 1 -- 3, 403 -- 412).
Fle89: A. D. Fleming. A representation for geometrically toleranced parts. In J. R. Woodwark, editor, Geometric Reasoning. Oxford University Press, 1989.
Flo87: L. De Floriani. A graph-based approach to object feature recognition. Proc. 3rd ACM Symposium on Computational Geometry, Waterloo, Ontario, June 1987, 1987.
Flo88: L. De Floriani. Representation and extraction of object features in a solid model. In R. A. Earnshaw, editor, Theoretical Foundations of Computer Graphics and CAD. Springer-Verlag, 1988. (Proc. NATO Advanced Study Institute, Il Ciocco, Italy, July 1987; NATO ASI Series, Vol F40).
Flo89: L. De Floriani. Feature extraction from boundary models of three-dimensional objects. IEEE Trans. on Pattern Analysis & Machine Intelligence, 11, 8, 785 -- 798, 1989.
FMN90: L. De Floriani, A. Maulik, and G. Nagy. Manipulating a modular boundary model with a face-based graph structure. In M. J. Wozny, J. U. Turner, and K. Preiss, editors, Geometric Modeling for Product Engineering. North-Holland Publishing Co., 1990. (Proc. IFIP WG5.2/NSF Working Conf., Rensselaerville, NY, Sept. 1988).
FMN91: L. De Floriani, A. Maulik, and G. Nagy. Representation of solid objects by a modular boundary model. In L. S. Homem de Mello and ?. ?. Lee, editors, Computer Aided Mechanical Design. Plenum Press, New York, NY, 1991.
FN88: L. De Floriani and G. Nagy. An alternative goal-oriented hierarchical representation of solid objects for computer-integrated manufacturing. Proc. IEEE Intl. Conf. on Robotics & Automation, Philadelphia, PA, 24-29 Apl 1988, 1988.
FS90: S. Finger and S. Safier. Representing and recognizing features in mechanical designs. In J. Rinderle, editor, Design Theory and Methodology -- DTM '90. American Society of Mechanical Engineers, New York, NY, 1990. (Proc. Conf. in Chicago, IL, 16 -19 Sept 1990; ASME Publication DE-Vol. 27).
FS94: B. Faltings and K. Sun. Computer-aided creative mechanism design. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
Fuj91: W. T. Fujimoto. Automated design of aerospace assemblies. Proc. 1991 SME/NSF Conf. on Design & Manufacturing Systems, Austin, TX, Jan. 1991, 1991.
FW87: T. L. De Fazio and D. E. Whitney. Simplified generation of all mechanical assembly sequences. IEEE J. Robotics & Automation, RA-3, 6, 640 -- 658, 1987. (see also corrections, ibid., RA-4, 6, 705 -- 708, 1988).
FYF94: S. O. Filho, A. Z. Yoshida, and J. C. E. Ferreira. Feature technology as a tool for concurrent engineering. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
G88a: D. C. Genord et al. An automatic NC processor: Harnessing the technology of form feature based solids modelling. Proc. SME Autofact Conf., Chicago, IL, 30 Oct -- 8 Nov 1988, 1988.
G88b: E. V. Goncalves et al. Pattern recognition approach for group technology implementation. Proc. 16th SME National Conf. on Advanced Manufacturing & Robotics, Urbana, IL, 24-27 May 1988, 1988.
G88c: G. R. Graves et al. An interface architecture for CAD/CAPP integration using knowledge-based systems and feature recognition. Int. J. Computer Integrated Manufacture, 1, 2, 89 -- 100, 1988.
G89: G. R. Graves et al. A functional approach to feature recognition in production planning. Computer-Integrated Manufacturing Systems, 2, 3, 162 -- 171, 1989.
Gad94a: R. Gadh. Feature mapping and feature recognition in geometric design generation. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 107 -- 128. Elsevier Science B.V., 1994.
Gad94b: R. Gadh. Feature mappings as utilized within a flexible features-based design approach. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
GAHL90: H. Grabowski, R. Anderl, V. Holland-Letz, B. Pätzold, and A. Suhm. An integrated CAD/CAM-system for product and process modelling. In F.-L. Krause and H. Jansen, editors, Advanced Geometric Modelling for Engineering Applications. North-Holland Publishing Co., 1990. (Proc. GI/IFIP International Symposium, Berlin, Germany, Nov. 1989).
GAP91: H. Grabowski, R. Anderl, and M. J. Pratt, editors. Advanced Modelling for CAD/CAM Systems. Springer-Verlag, 1991. (ESPRIT Research Reports - Project 322, CAD Interfaces, Vol. 7).
GC88: W. Greenwood and K. Chase. Worst case tolerance analysis with nonlinear problems. Trans. ASME, 110, 232 -- 235, 1988.
GC90a: F. Giacometti and T.-C. Chang. A model for parts, assemblies and tolerances. Preprint for 1st IFIP WG5.2 Workshop on Design for Manufacturing, Enschede, The Netherlands, 1990, 1990.
GC90b: F. Giacometti and T.-C. Chang. Object-oriented design for modelling parts, assemblies and tolerances. Proc. Conf. on Technology of Object-oriented Languages & Systems (TOOLS), Paris, France, 1990, 1990.
GC91: F. Giacometti and T.-C. Chang. Design of mechanical assemblies with functional fetaures. In Advances in Design Automation, 1991. (Preprint for 1991 ASME Design Automation Conf., Miami, FL).
GC92: I. R. Grosse and D. D. Corkill. A blackboard-based approach to intelligent finite element modelling and analysis. ASME Comp. Eng. ???????????, 2, 61 -- 68, 1992.
GC94: J. Gao and K. Case. Implementation aspects of a feature-based design system for manufacturing planning. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
GDW93: C. R. Gilman, X. Dong, and M. J. Wozny. Feature-based fixture design and set-up planning. In Z. Dong, editor, Artificial Intelligence in Optimal Design and Manufacturing. Prentice-Hall, 1993. (Also Technical Report 92032, Design Research Center, Rensselaer Polytechnic Institute, Troy, NY).
GGHP91: R. Gadh, E. L. Gursöz, M. A. Hall, and F. B. Prinz. Feature abstraction in a knowledge-based critique of designs. ASME Manufacturing Review, 4, 2, 115 -- 125, 1991.
GH90: P. Gavankar and M. R. Henderson. Graph-based extraction of protrusions and depressions from boundary representations. Computer Aided Design, 22, 7, 442 -- 450, 1990.
GHML86: G. Goldbogen, P. Hoernes, A. McCool, and A. Lim. Expert system for extracting manufacturing features from a CAD database. Technical report, Center for Manufacturing Productivity and Technology Transfer, Rensselaer Polytechnic Institute, Troy, NY, 1986.
Gil90: C. R. Gilman. The use of the PDES Form Feature Information Model as the primary representation for a form feature modeler. Master's thesis, Rensselaer Polytechnic Institute, 1990.
Gin89: N. N. Z. Gindy. A hierarchical structure for form features. Int. J. Production Research, 27, 12, 2089 -- 2103, 1989.
GM90: O. Gonikhin and A. J. Medland. Use of networks in describing the design to manufacturing process. Int. J. Computer Integrated Manufacture, 3, 3, 171 -- 177, 1990.
GM93a: J.-K. Gui and M. Mäntylä. Assembly modelling on the basis of a mechanical design prototype. In P. R. Wilson, M. J. Wozny, and M. J. Pratt, editors, Geometric Modeling for Product Realization. North-Holland Publishing Co., 1993. (Proc. IFIP WG5.2 Workshop on Geometric Modeling in CAD, Rensselaerville, NY, 27 Sep - 1 Oct 1992).
GM93b: J.-K. Gui and M. Mäntylä. New concepts for complete product assembly modelling. In J. Rossignac, J. U. Turner, and G. Allen, editors, Second Symposium on Solid Modeling and Applications. Association for Computing Machinery, New York, NY, 1993. (Proc. ACM Symposium, Montreal, Canada, May 1993).
GMCS90: L. Gursöz, R. Mattikalli, J.-M. Chen, and A. Sudhalkar. A guide to the NOODLES geometric modeling system. Engineering Design Research Center, Carnegie-Mellon University, 1990.
GNRZ94: S. K. Gupta, D. S. Nau, W. C. Regli, and G. Zhang. A methodology for systematic generation and evaluation of alternative operation plans. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 161 -- 184. Elsevier Science B.V., 1994.
GNZK92: S. K. Gupta, D. S. Nau, G. Zhang, and T. R. Kramer. Feature algebra using PDES/STEP. Proc. 2nd Workshop on Process Planning Concepts, Representations and Architectures, 1992.
GP90: E. L. Gursöz and F. B. Prinz. A point set approach in geometric modelling. In F.-L. Krause and H. Jansen, editors, Advanced Geometric Modelling for Engineering Applications. North-Holland Publishing Co., 1990. (Proc. GI/IFIP International Symposium, Berlin, Germany, Nov. 1989).
GP91: R. Gadh and F. Prinz. Shape feature abstraction in knowledge-based analysis of manufactured products. In Proc. 7th IEEE Conf. on Artificial Intelligence Applications, Feb. 1991. IEEE, 1991.
GP92: R. Gadh and F. B. Prinz. Recognition of geometric forms using the differential depth filter. Computer Aided Design, 24, 11, 583 -- 598, 1992.
Gra77: A. R. Grayer. The automatic production of machined components starting from a stored geometric description. In D. McPherson, editor, Advances in Computer-Aided Manufacturing, pages 137 -- 152. North-Holland Publishing Co., 1977. (Proc. PROLAMAT 76 Conf., Stirling, Scotland, June 1976).
GRL94: H. Grabowski, S. Rude, and B.-Y. Liu. Automatic recognition of product models from technical drawings -- a half-space oriented approach. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
GS94: I. R. Grosse and K. Sahu. Preliminary design of injection molded parts based on manufacturing and functional simulations. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 289 -- 313. Elsevier Science B.V., 1994.
GT93: J. Guilford and J. U. Turner. Advanced analysis and synthesis for geometric tolerances. ASME Manufacturing Review, 6, 4, 305 -- 313, 1993.
Gu92: P. Gu. PML: Product modelling language. Computers in Industry, 18, 3, 265 -- 277, 1992.
Gui91: J.-K. Gui. Object-oriented assembly and assembly design process modelling. J. Engineering Design, 2, 2, ??? -- ???, 1991.
Gui92: J. Guilford. Tolerance representation and analysis in solid models. Overheads from IFIP WG5.2 Workshop on Geometric Modeling in CAD, Rensselaerville, NY, 27 Sep - 1 Oct 1992, 1992.
GW91: C. R. Gilman and M. J. Wozny. The feasibility and limitations of the STEP form feature information model as a conceptual schema for form features. In A. Bagchi and J. J. Beaman, editors, Intelligent Design and Manufacturing for Prototyping. American Society of Mechanical Engineers, New York, NY, 1991. (Proc. ASME Winter Annual Meeting, Atlanta, GA, Dec. 1991, ASME Publication PED-Vol. 50. Also Technical Report 91007, Design Research Center, Rensselaer Polytechnic Institute, Troy, NY).
GZS88: D. C. Gossard, R. P. Zuffante, and H. Sakurai. Representing dimensions, tolerances and features in MCAE systems. IEEE Computer Graphics & Applications, 8, 2, 51 -- 59, 1988.
HA84: M. R. Henderson and D. C. Anderson. Computer recognition and extraction of form features: A CAD/CAM link. Computers in Industry, 5, 4, 315 -- 325, 1984.
Hai85: S. R. Hailstone. Explicit form features in solid modelling. Master's thesis, Dept. of Applied Computing & Mathematics, Cranfield Institute of Technology, England, 1985.
Hal94: G. Halevi. CAD for manufacturing support. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
HB78: R. C. Hillyard and I. C. Braid. Analysis of dimensions and tolerances in computer aided mechanical design. Computer Aided Design, 10, 3, 161 -- 166, 1978.
HB86: K. E. Hummel and S. L. Brooks. Symbolic representation of manufacturing features for an automated process planning system. In Proc. ASME Winter Annual Meeting, Anaheim, CA., Dec. 1986; Symposium on Knowledge-based Expert Systems for Manufacturing, pp. 233 -- 243. American Society of Mechanical Engineers, New York, NY, 1986.
HB89: K. E. Hummel and C. W. Brown. The role of features in the implementation of concurrent product and process design. Proc. 1989 ASME Winter Annual Meeting, San Francisco, CA, 1989. (ASME Publication DE-Vol 21, PED-Vol 36).
HBA86: N. Hart, J. Bennaton, and S. Açar. A CAD engineering language to aid manufacture. In J. A. McGeough, editor, Computer Aided Production Engineering. Mechanical Engineering Publications Ltd., Bury St. Edmunds, England, 1986. (Proc. Intl. Conf. in Edinburgh, Scotland, Apl. 1986).
HC88: M. R. Henderson and G.-J. Chang. FRAPP: Automated feature recognition and process planning from solid model data. In Proc. ASME Computers in Engineering Conf., San Francisco, CA, July/Aug. 1988. American Society of Mechanical Engineers, New York, NY, 1988.
Hen84: M. R. Henderson. Extraction of Feature Information from Three Dimensional CAD Data. PhD thesis, Purdue University, West Lafayette, IN, 1984.
Hen90: M. R. Henderson. Feature definition techniques in automated analysis. In M. J. Wozny, J. U. Turner, and K. Preiss, editors, Geometric Modeling for Product Engineering. North-Holland Publishing Co., 1990. (Proc. IFIP WG5.2/NSF Working Conf., Rensselaerville, NY, Sept. 1988).
Hen93a: M. R. Henderson. Representing functionality and design intent in product models. In J. Rossignac, J. U. Turner, and G. Allen, editors, Second Symposium on Solid Modeling and Applications. Association for Computing Machinery, New York, NY, 1993. (Proc. ACM Symposium, Montreal, Canada, May 1993).
Hen93b: G. Henzold. Comparison of vectorial tolerancing and conventional tolerancing. In H. B. V. Srinivasan & Voelcker, editor, Proc. 1993 International Forum on Dimensional Tolerancing & Metrology, Dearborn, MI, 17 - 19 June 1993. American Society of Mechanical Engineers, New York, NY, 1993.
HG86: J. K. Hirschtick and D. C. Gossard. Geometric reasoning for design advisory systems. In Proc. ASME Computers in Engineering Conf., Chicago, IL, July 1986, pp. 263 -- 270. American Society of Mechanical Engineers, New York, NY, 1986.
HH92: J.-L. Hwang and M. R. Henderson. Applying the perceptron to three-dimensional feature recognition. J. Design & Manufacturing, 2, 187 -- 198, 1992.
HHB90: P. J. Herbert, C. J. Hinde, A. D. Bray, V. A. Launders, D. Round, and D. M. Temple. Feature recognition within a truth maintained process planning system. Int. J. Computer Integrated Manufacture, 3, 2, 121 -- 132, 1990.
HJ93: C. M. Hoffmann and R. Juan. EREP: An editable high-level representation for geometric design and analysis. In P. R. Wilson, M. J. Wozny, and M. J. Pratt, editors, Geometric Modeling for Product Realization. North-Holland Publishing Co., 1993. (Proc. IFIP WG5.2 Workshop on Geometric Modeling in CAD, Rensselaerville, NY, 27 Sep - 1 Oct 1992).
HL89: Y. F. Huang and C. S. Lee. Precedence knowledge in feature mating operation assembly planning. Proc. IEEE Intl. Conf. on Robotics & Automation, Scottsdale, AZ, 14-19 May 1989, 1989.
HLS89: A. Hadley, N. Langrana, and L. Steinberg. Design using features for mechanical components. Technical report, Rutgers University, NJ, 1989.
HM88: M. R. Henderson and S. Musti. Automated group technology part coding from a three-dimensional CAD database. ASME Trans. on Engineering for Industry, 110, 3, 278 -- 287, 1988.
HMPW91: P. Husbands, F. Mill, G. Pedley, and S. Warrington. The Edinburgh composite component. Preprint, MSTF '91, 5th Int. Conf. on Manufacturing Science & Technology of the Future, Enschede, The Netherlands, June 1991, 1991.
HMW87: P. Husbands, F. Mill, and S. Warrington. A knowledge-based process planning system. In D. Sriram and R. A. Adey, editors, Knowledge Based Systems in Engineering Planning and Design. Computational Mechanics Publications, 1987.
HMW89: P. Husbands, F. Mill, and S. Warrington. Part representation in process planning for complex components. In J. R. Woodwark, editor, Geometric Reasoning. Oxford University Press, 1989.
Hof82: P. Hoffmann. Analysis of tolerances and process inaccuracies in discrete part manufacturing. Computer Aided Design, 14, 2, 83 -- 88, 1982.
Hop93: T. H. Hopp. Computational metrology. ASME Manufacturing Review, 6, 4, 295 -- 304, 1993.
HR90: M. R. Henderson and A. Razdan. Feature-based neighbourhood isolation techniques for automated finite element analysis. In M. J. Wozny, J. U. Turner, and K Preiss, editors, Geometric Modeling for Product Engineering. North-Holland Publishing Co., 1990. (Proc. IFIP WG5.2/NSF Working Conf., Rensselaerville, NY, Sept. 1988).
HRB93: R. J. Hocken, J. Raja, and U. Babu. Sampling issues in coordinate metrology. ASME Manufacturing Review, 6, 4, 282 -- 294, 1993.
Hsi90: D. Hsiao. Feature Mapping and Manufacturability Evaluation with an Open Set Feature Modeler. PhD thesis, College of Engineering and Applied Sciences, Arizona State University, Tempe, AZ, 1990.
HSS94: M. R. Henderson, G. Srinath, R. Stage, K. Walker, and W. C. Regli. Boundary-representation based feature identification. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 15 -- 38. Elsevier Science B.V., 1994.
HT90: M. R. Henderson and L. Taylor. Computer-intelligible dimensions and tolerances: An annotated bibliography. Report for Sandia Laboratories by School of Mechanical & Aerospace Engineering, Arizona State University, donated by Sandia to CAM-I and published as Report No. DR-90-PM-01, CAM-I Inc., Arlington, TX, 1990.
HTHN94: B. E. Hirsch, K.-D. Thoben, E. Hämmerle, and H. Nordloh. CAD/CAM integration of fixture planning for non-prismatic parts based on fixturing features. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
HU90: T. S. Hwang and D. G. Ullman. The design capture system: Capturing back of the envelope sketches. J. Engineering Design, 1, 4, ?????, 1990.
Hum89a: K. E. Hummel. Coupling rule-based and object-oriented programming for the classification of machined features. In Proc. ASME Computers in Engineering Conf., Anaheim, CA, July/Aug 1989, Vol. 1, pp. 409 -- 418. American Society of Mechanical Engineers, New York, NY, 1989.
Hum89b: K. E. Hummel. The role of features in the implementation of concurrent product and process design. In Proc. 1989 ASME Winter Annual Meeting, San Francisco, CA. American Society of Mechanical Engineers, New York, NY, 1989.
HW89: C. Hayes and P. K. Wright. Setup planning in machining: An expert system approach. In Proc. NSF Conf. on Advances in Manufacturing Systems Integration and Process Planning, 1989.
HW90: C. Hayes and P. K. Wright. Automating process planning: Using feature interactions to guide search. J. Manufacturing Systems, 8, 1, 1 -- 15, 1990.
Hwa88: J.-L. Hwang. Rule-based feature recognition: Concepts, primitives and implementation. Master's thesis, Arizona State University, Tempe, AZ, 1988.
Hwa91: J.-L. Hwang. Applying the Perceptron to 3-D Feature Recognition. PhD thesis, Arizona State University, Tempe, AZ, 1991.
Ide87: N. C. Ide. Integration of process planning and solid modeling through design by features. Master's thesis, Dept. of Computer Science, University of Maryland, College Park, MD, 1987.
IKD89: R. K. Irani, B. H. Kim, and J. R. Dixon. Integrating CAE, features and iterative design of injection molds. In Proc. 1989 Computers in Engineering Conf. American Society of Mechanical Engineers, New York, NY, 1989.
IM92: K. Ishii and A. Miller. Design representation for manufacturability evaluation: Beyond feature-based design. In Proc. 1992 ASME Computers in Engineering Conf., San Francisco. American Society of Mechanical Engineers, New York, NY, 1992.
IMK94: M. Inui, N. Matsuki, and F. Kimura. Extended formulation of geometric tolerances based on parametric modifications of surface features. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
IOK93: M. Inui, H. Otto, and F. Kimura. Algebraic interpretation of geometric tolerances for evaluating geometric uncertainties in solid modeling. In J. Rossignac, J. U. Turner, and G. Allen, editors, Second Symposium on Solid Modeling and Applications. Association for Computing Machinery, New York, NY, 1993. (Proc. ACM Symposium, Montreal, Canada, May 1993).
IS87: K. Iwata and N. Sugimura. An integrated CAD/CAPP system with `know-hows' on machining accuracies of parts. ASME J. of Engineering for Industry, 109, 128 -- 132, 1987.
ISKS86: M. Inui, H. Suzuki, F. Kimura, and T. Sata. Generation and verification of process plans using dedicated models of products in computer. In Proc. CAPE '86 Conf. North-Holland Publishing Co., 1986.
ISO92: ISO. Product Data Representation and Exchange -- Part 48: Integrated Resources: Form Features. ISO TC184/SC4/N102, Working Draft, January 1992. (Available from National Institute of Standards & Technology, Gaithersburg, MD 20899).
ISO93a: ISO. Product Data Representation and Exchange -- Part 11: Description Methods: The Express Language Reference Manual. Draft International Standard ISO DIS 10303-11, 1993.
ISO93b: ISO. Product Data Representation and Exchange -- Part 21: Implementation Methods: Clear Language Encoding of the Exchange Structure. Draft International Standard ISO DIS 10303-21, 1993.
ISO93c: ISO. Product Data Representation and Exchange -- Part 42: Integrated Resources: Geometric and Topological Representation. Draft International Standard ISO DIS 10303-42, 1993.
J91: F. R. Jacobs et al. A rule-based system to generate NC programs from CAD exchange files. Computers & Industrial Engineering, 20, 2, 167 -- 176, 1991.
Jak77: R. Jakubowski. Application of formal languages and fuzzy automata in designing. In J. Madey, editor, Proc. IFIP--INFOPOL--76 Conf. North-Holland Publishing Co., 1977.
Jak82: R. Jakubowski. Syntactic characterisation of machine parts shapes. Cybernetics & Systems, 13, 1, 1-24, 1982.
Jak85: R. Jakubowski. Extraction of shape features for syntactic recognition of mechanical parts. IEEE Trans. on Systems, Man & Cybernetics, SMC-15, 5, 642 -- 651, 1985.
Jak86: R. Jakubowski. A structural representation of shape and its features. Information Sciences, 39, 129 -- 151, 1986.
Jak89: R. Jakubowski. A theoretic framework for structural representation and recognition of machine parts features in rotational or box-type cubic parts. Archiwum Informatyki Teoretycznej i Stosowanej, 1, 1 -- 4, 3 -- 33, 1989.
Jak90: R. Jakubowski. Decomposition of complex shapes for their structural recognition. Information Sciences, 50, 35 -- 71, 1990.
JAK91: C. C. Jara-Almonte and S. Krishnamoorthy. Manufacturability evaluation using axiomatic design principles. Proc. 1991 SME/NSF Conf. on Design & Manufacturing Systems, Austin, TX, Jan. 1991, 1991.
Jar84: G. E. M. Jared. Shape features in geometric modelling. In M. S. Pickett and J. W. Boyse, editors, Solid Modelling by Computers. Plenum Press, New York, NY, 1984. (Proc. General Motors Solid Modeling Symposium, Warren, Michigan, Sept. 1983).
Jar89a: G. E. M. Jared. The feature recognition battle - latest from the front. Proc. British Computer Society Seminar New Tools for Shape Modelling, 18th May 1989, Café Royal, London, 1989.
Jar89b: G. E. M. Jared. Recognizing and using geometric features. In J. R. Woodwark, editor, Geometric Reasoning. Oxford University Press, 1989.
JC88: S. Joshi and T. C. Chang. Graph-based heuristics for recognition of machined features from a 3D solid model. Computer Aided Design, 20, 2, 58 -- 66, 1988.
JC90: S. Joshi and T. C. Chang. Feature extraction and feature-based design approaches in the development of design interface for process planning. J. Intelligent Manufacturing, 1, 1, 1 -- 16, 1990.
JD90: A. T. Joseph and B. J. Davies. Knowledge based process planning system for turned components. Int. J. Advanced Manufacturing Technology, 5, 52 -- 65, 1990.
JF90a: R. Jakubowski and M. Flasinski. A structural approach to synthesis of 3-D solids and to their analysis. Archiwum Informatyki Teoretycznej i Stosowanej, 2, 3&4, 167 -- 208, 1990.
JF90b: R. B. Jerard and B. K. Fussell. Use of variational geometry in the automatic generation of machining programs. In M. J. Wozny, J. U. Turner, and K. Preiss, editors, Geometric Modeling for Product Engineering. North-Holland Publishing Co., 1990. (Proc. IFIP WG5.2/NSF Working Conf., Rensselaerville, NY, Sept. 1988).
JF92: R. Jakubowski and M. Flasinski. Towards a generalised sweeping model for designing with extraction and recognition of 3D solids. J. of Design and Manufacturing, 2, 239 -- 258, 1992.
JHdP94: N. P. Juster, L.-H. Hsu, and A. de Pennington. The selection of surfaces for inspection planning. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 333 -- 362. Elsevier Science B.V., 1994.
JK77: R. Jakubowski and A. Kasprzak. A syntactic description and recognition of rotary machine elements. IEEE Trans. on Computers, C-26, 10, 1039 -- 1043, 1977.
JKD90: A. T. Joseph, M. Kalta, and B. J. Davies. Automatic generation of NC programs for turned components from CAD product models. Proc. 28th MATADOR Conf., UMIST, Manchester, England, 18-19 Apl 1990, 1990.
Joe88: S. Joensen. The handling of welding data in a CAD system. Proc. 2nd Intl. Conf. on Computer Technology in Welding, Cambridge, UK, 8-9 Jun 1988, 1988.
Joh91: H. L. Johannesson. Computer aided part design based on standard component interface geometry. In Advances in Design Automation. American Society of Mechanical Engineers, New York, NY, 1991. (ASME Publication DE-32, Vol. 2, pp. 347 -- 352).
Jos87: S. Joshi. CAD Interface for Automated Process Planning. PhD thesis, Purdue University, West Lafayette, IN, 1987.
Jos90: S. Joshi. Feature recognition and geometric reasoning for some process planning activities. In M. J. Wozny, J. U. Turner, and K. Preiss, editors, Geometric Modeling for Product Engineering. North-Holland Publishing Co., 1990. (Proc. IFIP WG5.2/NSF Working Conf., Rensselaerville, NY, Sept. 1988).
JRM90: J. Jacobsohn, G. Radack, and F. Merat. Incorporating knowledge of geometric dimensioning and tolerancing into a feature-based CAD system. Technical report, Case Western Reserve University, 1990.
JRR90: S. Jablonski, B. Reinwald, and T. Ruf. Integration of process planning and job shop scheduling for dynamic and adaptive manufacturing control. Proc. 2nd Int. Conf. on CIM, Troy, NY, 1990.
JS89a: G. E. M. Jared and I. A. Stroud. A knowledge-based expert system with geometric reasoning capabilities for computer-aided process planning. Proc. 21st CIRP International Seminar on Manufacturing Systems, June 1989, Stockholm, 1989.
JS89b: R. Jayaraman and V. Srinivasan. Geometric tolerancing I: Virtual boundary requirements. IBM J. Research & Development, 33, 2, 90 -- 104, 1989.
JSdP90: A. H. Juri, A. Saia, and A. de Pennington. Reasoning about machining operations using feature-based models. Int. J. Production Research, 28, 1, 153 -- 171, 1990.
JT92: S. Joshi and Y.-T. Tseng. Recognising multiple interpretations of interacting machining features. Overheads from IFIP WG5.2 Workshop on Geometric Modeling in CAD, Rensselaerville, NY, 27 Sep - 1 Oct 1992, 1992.
Jus92: N. P. Juster. Modelling and representation of dimensions and tolerances: A survey. Computer Aided Design, 24, 1, 3 -- 17, 1992.
K88a: S. Kanai et al. The flexible process-planning by combining the advanced CAPP, CAM and measuring systems. Proc. 16th SME National Conf. on Advanced Manufacturing & Robotics, Urbana, IL, 24-27 May 1988, 1988.
K88b: B. Kumar et al. Integration and testing of an intelligent feature extractor within a flexible manufacturing protocol. Proc. 16th SME National Conf. on Advanced Manufacturing & Robotics, Urbana, IL, 24 -- 27 May 1988, 1988.
K90: S. V. Kamarthi et al. Neural networks and their applications in component design data retrieval. J. Intelligent Manufacturing, 1, 2, 125 -- 140, 1990.
KAK87: B. Kumar, D. K. Anand, and J. A. Kirk. An intelligent feature extractor for automated machining. Proc. 5th Intl. Conf. on Systems Engineering, Dayton, OH, Sept 1987, 1987.
KAK88: B. Kumar, D. K. Anand, and J. A. Kirk. Knowledge representation scheme for an intelligent feature extractor. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug 1988. American Society of Mechanical Engineers, New York, NY, 1988.
Kar90: R. R. Karinthi. An Algebraic Approach to Feature Interactions. PhD thesis, University of Maryland, College Park, MD, 1990.
KBVY89: F.-L. Krause, M. Bienert, F. H. Vosgerau, and N. Yaramanoglu. Feature oriented system design for geometric modelling. In W. Strasser and H.-P. Seidel, editors, Theory and Practice of Geometric Modeling. Springer-Verlag, 1989. (Proc. Int. Conf. in Blaubeuren, Germany, Oct 1988).
Kim91: Y. S. Kim. Recognizing form features using convex decomposition. Technical Report GE-91-05 (UILU-ENG-91-3027), Dept. of General Engineering, University of Illinois at Urbana-Champaign, 1991.
Kim92: Y. S. Kim. Recognition of form features using convex decomposition. Computer Aided Design, 24, 9, 461 -- 476, 1992.
Kim94: Y. S. Kim. Volumetric feature recognition using convex decomposition. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 39 -- 63. Elsevier Science B.V., 1994.
KJBM90: F.-L. Krause, H. Jansen, M. Bienert, and F. Major. System architectures for flexible integration of product gestaltung. In F.-L. Krause and H. Jansen, editors, Advanced Geometric Modelling for Engineering Applications. North-Holland Publishing Co., 1990. (Proc. GI/IFIP International Symposium, Berlin, Nov. 1989).
Kje83: T. Kjellberg. Geometric product models, GPM in perspective. Proc. Nicograph 83 Conf., Tokyo, 1983.
Kje84: T. Kjellberg. The integration of CAD/CAM based on product modelling for better human communication. Proc. 16th CIRP Seminar on Manufacturing Systems, Tokyo, 1984.
KK88: W. Kennington and B. Kimball. Feature recognition: Rule-based interpretation of CAD data. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug 1988. American Society of Mechanical Engineers, New York, NY, 1988.
KKR91: F.-L. Krause, S. Kramer, and E. Rieger. PDGL: A language for efficient feature-based product Gestaltung. Ann. CIRP, 40, 1, 135 -- 138, 1991.
KL87: H. Ko and K. W. Lee. Automatic assembling procedure generation from mating conditions. Computer Aided Design, 19, 1, 3 -- 10, 1987.
KL89: S. H. Kim and K. W. Lee. An assembly modeling system for dynamic and kinematic analysis. Computer Aided Design, 21, 1, 2 -- 12, 1989.
Kle88: A. Klein. A solid groove feature based programming of parts. Mechanical Engineering, March, 1988.
Kle89: M. W. Kleeman. Feature based parametric solids modeling for improving mechanical engineering design. Proc. SME Autofact Conf., Detroit, MI, 30 Oct - 2 Nov 1989, 1989.
KN89a: R. R. Karinthi and D. S. Nau. Geometric reasoning as a guide to process planning. In Proc. ASME Computers in Engineering Conf., Anaheim, CA, July 1989. American Society of Mechanical Engineers, New York, NY, 1989.
KN89b: R. R. Karinthi and D. S. Nau. Using a feature algebra for reasoning about geometric feature interactions. Proc 11th Intl. Joint Convention on Artificial Intelligence (IJCAI), Detroit, MI, 20-25 Aug. 1989, 1989.
KN91: R. R. Karinthi and D. S. Nau. Geometric reasoning for design and process planning. Proc. 1991 SME/NSF Conf. on Design & Manufacturing Systems, Austin, TX, Jan. 1991, 1991.
KN92: R. R. Karinthi and D. S. Nau. An algebraic approach to feature interactions. IEEE Trans. on Pattern Analysis & Machine Intelligence, 14, 4, 469 -- 484, 1992.
KNY92: R. R. Karinthi, D. S. Nau, and Q. Yang. Handling feature interactions in process planning. Applied Artificial Intelligence, 6, 4, 389 -- 415, 1992.
KO84: Y. Kakazu and N. Okino. Pattern recognition approaches to GT code generation on CSG. Proc. 16th CIRP International Seminar on Manufacturing Systems, Tokyo, 1984.
KPY90: W. Keirouz, J. Pabon, and R. Young. Integrating parametric geometry, features and variational modeling for conceptual design. In J. Rinderle, editor, Design Theory and Methodology -- DTM '90. American Society of Mechanical Engineers, New York, NY, 1990. (Proc. Conf. in Chicago, IL, 16 -19 Sept 1990; ASME Publication DE-Vol. 27).
Kra89: T. R. Kramer. A parser that converts a boundary representation into a features representation. Int. J. Computer Integrated Manufacture, 2, 3, 154 -- 163, 1989. (Previously published as Technical Report NISTIR 88-3864, U.S. Dept. of Commerce, National Institute of Standards and Technology, Gaithersburg, MD, 1988).
Kra92a: T. R. Kramer. Issues concerning material removal shape element volumes (mrsevs). Technical Report NISTIR 4804, National Institute of Standards and Technology, Gaithersburg, MD, 1992.
Kra92b: T. R. Kramer. A library of material removal shape element volumes (mrsevs). Technical Report NISTIR 4809, National Institute of Standards and Technology, Gaithersburg, MD, 1992.
Kro91: E. Kroll. Spatial reasoning in assembly planning. Proc. 1991 SME/NSF Conf. on Design & Manufacturing Systems, Austin, TX, Jan 1991, 1991.
KRU94: F.-L. Krause, E. Rieger, and A. Ulbrich. Feature processing as kernel for integrated CAE systems. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
KS86: F. Kimura and H. Suzuki. Variational product design by constraint propagation and satisfaction in product modelling. Ann. CIRP, 35, 1, 75 -- 78, 1986.
KSV91: A. Kusiak, E. Szczerbicki, and R. Vujosevic. Intelligent design synthesis: an object-oriented approach. Int. J. Production Research, 29, 7, 1291 -- 1308, 1991.
KSW87: F. Kimura, H. Suzuki, and L. Wingård. A uniform approach to dimensioning and tolerancing in product modelling. In K. Bø, L. Estensen, and E. A. Warman, editors, Computer Applications in Production and Engineering. North-Holland Publishing Co., 1987. (Proc. IFIP '86 Conf.).
Kum88: B. Kumar. Feature Extraction and Validation within a Flexible Manufacturing Protocol. PhD thesis, University of Maryland, College Park, MD, 1988.
Kun84: H.-K. Kung. An Investigation into the Development of Process Plans from Solid Geometric Modeling Representation. PhD thesis, Oklahoma State University, 1984.
Kur89: R. Kurland. Leading edge CAD/CAM/CAE technologies and predictions of their success. In Proc. SME Autofact Conf., Detroit, MI, 30 Oct - 2 Nov 1989, 1989.
Kus90a: A. Kusiak. Intelligent Manufacturing Systems. Prentice-Hall, 1990.
Kus90b: A. Kusiak. Optimal selection of machinable volumes. Trans. IIE, 22, 2, 151 -- 160, 1990.
Kus91: A. Kusiak. Process planning: A knowledge-based and optimization perspective. IEEE Trans. Robotics & Automation, 7, 3, 257 -- 266, 1991.
KUV: F.-L. Krause, A. Ulbrich, and F. H. Vosgerau. Feature-based approach for the integration of design and process planning systems. In ????, editor, ???? North-Holland Publishing Co., ???? (Proc. IFIP WG5.2 Workshop on Geometric Modelling, Rensselaerville, NY, June 1990).
KVY88: F.-L. Krause, F. H. Vosgerau, and N. Yaramanoglu. Implementation of technical rules in a feature-based modeller. Proc. 2nd Eurographic Workshop on Intelligent CAD Systems, Amsterdam, Netherlands, Apr. 1988, 1988.
KW91: S. E. Koyluoglu and W. R. Wilson. Feature-based analysis of mechanical constraint. Proc. 19th SME North American Manufacturing Research Conf., Rolla, MO, May 1991, 1991.
KW92a: Y. S. Kim and D. J. Wilde. A convergent convex decomposition of polyhedral objects. ASME J. Mechanical Design, 114, 468 -- 476, 1992.
KW92b: Y. S. Kim and D. J. Wilde. Local cause of non-convergence in a convex decomposition using convex hulls. ASME J. Mechanical Design, 114, 459 -- 467, 1992. (Also in Proc. 1989 ASME Design Automation Conf., Montreal, Sept. 1989).
Kyp80: L. K. Kyprianou. Shape Classification in Computer Aided Design. PhD thesis, Computer Science Laboratory, Cambridge University, 1980.
L90: B. D. Lawler et al. Generative process planning from PDES: RAMP goes beyond the routing sheet. In Proc. SME Autofact Conf., Detroit, MI, Nov. 1990. Society of Manufacturing Engineers, Dearborn, MI, 1990.
LA85: K. W. Lee and G. Andrews. Inference of the positions of components in an assembly: Part 2. Computer Aided Design, 17, 20 -- 24, 1985.
LA86: Y. S. Liu and R. Allen. A proposed synthetic interactive process planning system. In J. A. McGeough, editor, Computer Aided Production Engineering. Mechanical Engineering Publications Ltd., Bury St. Edmunds, England, 1986. (Proc. International Conf., Edinburgh, April 1986).
Laa93: T. Laakko. Incremental feature modelling: A methodology for integrating features and solid models. Acta Polytechnica Scandinavica, Mathematics and Computer Science Series, No. Ma 63, published by the Finnish Academy of Technology, Helsinki, 1993. (Dissertation for the degree of Doctor of Technology, Helsinki University of Technology, Finland).
LBS88: M. W. Long, S. G. Bailey, and W. R. Shawver. An expert system for mechanically fastened joint design. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988. American Society of Mechanical Engineers, New York, NY, 1988.
LC90: W.-C. Lin and T.-W. Chen. Inferring CSG-based object representation from range data. Proc. Canadian Image Processing & Pattern Recognition Soc./ Vision Interface '90 Conf., Halifax, Nova Scotia, May 1990, 1990.
LDS86a: E. C. Libardi, J. R. Dixon, and M. K. Simmons. Designing with features: Design and analysis of extrusions as an example. Paper No. 86-DE-4, ASME Spring National Design Engineering Conf., Chicago, March 1986, 1986.
LDS86b: S. C. Luby, J. R. Dixon, and M. K. Simmons. Creating and using a features data base. Computers in Mechanical Engineering, Nov. 1986, 25 -- 33, 1986.
LDS86c: S. C. Luby, J. R. Dixon, and M. K. Simmons. Designing with features: Creating and using a features data base for evaluation of manufacturability of castings. In Proc. 1986 Computers in Engineering Conf. American Society of Mechanical Engineers, New York, NY, 1986.
LDS88: E. C. Libardi, J. R. Dixon, and M. K. Simmons. Computer environments for the design of mechanical assemblies: A research review. Engineering with Computers, 3, 121 -- 136, 1988.
Len92: D. H. Lentz. Geometric feature recognizer. Preprint for Intl. Conf. on Advanced Manufacturing Technology, Sunderland, UK, April 1992, 1992.
LF87: Y. C. Lee and K. S. Fu. Machine understanding of CSG: Extraction and unification of manufacturing features. IEEE Computer Graphics & Applications, 7, 1, 20 -- 32, 1987.
LG85: K. W. Lee and D. C. Gossard. A hierarchical data structure for representing assemblies: Part 1. Computer Aided Design, 17, 1, 15 -- 19, 1985.
LGM94: M. Lombard-Gregori and F. Mayer. System-based concurrent methodology for discrete part manufacturing engineering. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
LHB94: O. Legoff, J.-Y. Hascoët, and F. Bennis. CAD and robotic welding -- automatic trajectory generation -- features extraction. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
LJ88: Y. C. Lee and K.-F.J. Jea. A new CSG tree reconstruction algorithm for feature representation. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988. American Society of Mechanical Engineers, New York, NY, 1988.
LJ93: S. X. Li and R. B. Jerard. Non-isoparametric three-axis NC tool-path generation for finish machining of sculptured surfaces. In P. R. Wilson, M. J. Wozny, and M. J. Pratt, editors, Geometric Modeling for Product Realization. North-Holland Publishing Co., 1993. (Proc. IFIP WG5.2 Workshop on Geometric Modeling in CAD, Rensselaerville, NY, 27 Sep - 1 Oct 1992).
LK91: A. De Sam Lazaro and D. A. King. A hybrid system for automated design of fixtures. In A. Bagchi and J. J. Beaman, editors, Intelligent Design and Manufacturing for Prototyping. American Society of Mechanical Engineers, New York, NY, 1991. (Proc. Winter Annual Meeting of the ASME, Atlanta, GA, Dec. 1991), Publication PED-Vol. 50).
LL89: K. I. Lee and J. W. Lee. Pattern recognition and process planning prismatic workpieces by knowledge-based approach. Ann. CIRP, 38, 1, ?? -- ??, 1989.
LL91: Y. Luo and G. Lukács. A boundary representation of form features and non-manifold solid objects. In Solid Modeling Foundations and CAD/CAM Applications. Association for Computing Machinery, New York, NY, 1991. (Proc. ACM Symposium, Austin, TX, June 1991).
LLM94: K. Lagus, T. Laakko, and M. Mäntylä. ICONF -- an incremental constraint facility in a feature modelling system. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
LM91: T. Laakko and M. Mäntylä. A new form feature recognition algorithm. In G. Doumeingts, J. Browne, and M. Tomljanovich, editors, Computer Applications in Production and Engineering. North-Holland Publishing Co., CHECK PUBLISHER AND DATE ???1991. (Proc. CAPE '91 Conf., Bordeaux, France, Sept. 1991).
LM92: T. Laakko and M. Mäntylä. Feature-based modelling of families of machined parts. In G. Olling and F. Kimura, editors, Human Aspects in Computer Integrated Manufacturing. North-Holland Publishing Co., CHECK PUBLISHER, DATE ????1992. (Proc. PROLAMAT '92 Conf., Tokyo, Japan).
LM93: T. Laakko and M. Mäntylä. A feature definition language for bridging solids and features. In J. Rossignac, J. U. Turner, and G. Allen, editors, Second Symposium on Solid Modeling and Applications. Association for Computing Machinery, New York, NY, 1993. (Proc. ACM Symposium, Montreal, Canada, May 1993).
LM94: T. Laakko and M. Mäntylä. Incremental feature modelling. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 455 -- 479. Elsevier Science B.V., 1994.
LMM90: T. Laakko, M. Mäntylä, R. Mäntylä, J. Nieminen, R. Sulonen, and J. Tuomi. Feature models for design and manufacturing. In Proc. 23rd Annual Hawaii Int. Conf. on Systems Sciences, Kailua-Kona, HI, Jan. 1990. IEEE Computer Society, 1990.
LN91: H.-C. Liu and B. O. Nnaji. Design with spatial relationships. J. Manufacturing Systems, 10, 6, 449 -463, 1991.
LP81: H. R. Lewis and C. H. Papadimitriou. Elements of the Theory of Computation. Prentice-Hall, 1981.
LP89: Y. Liu and R. J. Popplestone. Planning for assembly from solid models. Proc. IEEE Intl. Conf. on Robotics & Automation, Scottsdale, AZ, 14 -- 19 May 1989, 1989.
LS84: C. R. Liu and R. Srinivasan. Generative process planning using syntactic pattern recognition. ASME Computers in Mechanical Engineering, March 1984, 63 -- 66, 1984.
LS88: M. Liou and P. Sheu. Automatic process pre-planning in manufacturing environments. Proc. IEEE Intl. Conf. on Robotics & Automation, Philadelphia, PA, 24 -- 29 Apl 1988, 1988.
LS93: D. H. Lentz and R. Sowerby. Feature extraction of concave and convex regions and their intersections. Computer Aided Design, 25, 7, 421 -- 437, 1993.
LT88: S. C. Y. Lu and J. B. Thompson. A distributed artificial intelligence approach to integrated engineering design. Preprint, 1988.
LTS91: R. K. Li, B. W. Taur, and H. J. Shyur. A two-stage feature-based design system. Int. J. Production Research, 29, 1, ?? -- ??, 1991.
LW87: K. Lai and W. R. D. Wilson. FDL: Language for function description and rationalization in mechanical design. In Proc. 1987 Computers in Engineering Conf, New York, NY. American Society of Mechanical Engineers, New York, NY, 1987.
LWH89: T. Lawlor-Wright and R. G. Hannam. A feature-based design for manufacture CADCAM package. Computer-Aided Engineering Journal, 6, 6, 215 -- 220, 1989.
LY90: R. K. Li and M. H. Yu. A framework for prismatic part data generation and machine loop concept. Int. J. Computer Integrated Manufacture, 3, 2, ?? -- ??, 1990.
M90: M. Marefat et al. IDP: Automating the CAD/CAM link by reasoning about shape. Proc. 6th IEEE Conf. on Artificial Intelligence Applications, Santa Barbara, CA, Mar. 1990, 1990.
Mag88: S. P. Magleby. Design by Functional Feature for Aircraft Structure. PhD thesis, University of Wisconsin-Madison, 1988.
Mah91: P. V. Mahajan. Estimation of relative die cost for stamped parts. M.S. project report, Manufacturing Engineering Program, University of Massachusetts at Amherst, Amherst, MA, 1991.
Män88: M. Mäntylä. Feature-based product modelling for process planning. In Proc. 2nd Toyota Conf., Aichi, Japan. Elsevier, New York, 1988.
Män89: M. Mäntylä. Directions for research in product modelling. In F. Kimura and A. Rolstadås, editors, Computer Applications in Production Engineering. North-Holland Publishing Co., 1989.
Män90: M. Mäntylä. A modeling system for top-down design of assembled products. IBM J. Research & Development, 34, 5, 636 -- 659, 1990.
Mar93: M. Marefat. Feature-based computer integrated inspection. In Computers in Engineering --- 1993, pages 145 -- 152. American Society of Mechanical Engineers, New York, NY, 1993.
MB89: K. S. Mortenson and B. K. Belnap. A rule-based approach employing feature recognition for engineering graphics characterisation. Computer-Aided Engineering Journal, Dec 1989, ??????????, 1989.
MBB94: K. Mawussi, A. Bernard, and P. Bourdet. Feature modelling and machining of forming dies. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
McG89: W. R. McGill. A Generative Computer Aided Process Planning System. PhD thesis, Dept. of Mechanical Engineering, Newcastle Polytechnic, England, 1989.
MD89: R. J. Menassa and W. R. DeVries. Locating point synthesis in fixture design. Ann. CIRP, 38, 1, 165 -- 170, 1989.
MD90: R. J. Menassa and W. R. DeVries. A design synthesis and optimization method for fixtures with compliant elements. In Advances in Integrated Design and Manufacturing. American Society of Mechanical Engineers, New York, NY, 1990. (Proc. 1990 ASME Winter Annual Meeting, San Francisco, CA ASME Publication DE Vol 23-1).
MDM94: C. Mascle, E. Dupinet, and R. Maranzana. Feature modelling in assembly planning. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
Mee91: S. Meeran. Automated Feature Recognition from 2D CAD Models. PhD thesis, School of Industrial & Manufacturing Science, Cranfield Institute of Technology, England, 1991.
Mil88: R. Miller. Parametric technologies introduces features-based design. Managing Automation, January, pp. 14 -- 15, 1988.
Mil89: J. M. Miller. Automatic assembly planning with fasteners. Proc. IEEE Intl. Conf. on Robotics & Automation, Scottsdale, AZ, 14 -- 19 May 1989, 1989.
Min85: R. H. Miner. A method for the representation and manipulation of geometric features in a solid model. Master's thesis, Dept. of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, 1985.
MK90: M. Marefat and R. L. Kashyap. Geometric reasoning for recognition of three-dimensional object features. IEEE Trans. on Pattern Analysis & Machine Intelligence, 12, 10, 949 -- 965, 1990.
MK92: M. Marefat and R. L. Kashyap. Automatic construction of process plans from solid model representations. IEEE Trans. on Systems, Man & Cybernetics, 22, 5, 1097 -- 1115, 1992.
MK94: S. Menon and Y. S. Kim. Cylindrical features in form feature recognition using convex decomposition. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
MKP90: S. Meeran, J. M. Kay, and J. Pearce. Expert systems for automated factory of the future. In Proc. 22nd ISATA Conf., Florence, Italy, May 1990. Associazione Tecnica dell'Automobile, Turin, 1990.
MM93: A. J. Medland and G. Mullineux. A constraint approach to feature based design. Int. J. Computer Integrated Manufacture, 6, 1&2, 34 -- 38, 1993.
MMK93: M. Marefat, S. Malhotra, and R. L. Kashyap. Object-oriented intelligent computer-integrated design, process planning, and inspection. IEEE Computer, 26, 3 (March 1993), 54 -- 65, 1993.
MO88: M. Mäntylä and J. Opas. HUTCAPP --- a machining operations planner. In Proc. 2nd Intl. Symposium on Robotics & Manufacturing Systems (ISRAM), Albuquerque, NM, 16-18 Nov 1988. American Society of Mechanical Engineers, New York, NY, 1988.
MOK93: F. Mandorli, H. Otto, and F. Kimura. A reference kernel model for feature-based CAD systems supported by conditional attributed rewrite systems. In J. Rossignac, J. U. Turner, and G. Allen, editors, Second Symposium on Solid Modeling and Applications. Association for Computing Machinery, New York, NY, 1993. (Proc. ACM Symposium, Montreal, Canada, May 1993).
MOP87: M. Mäntylä, J. Opas, and J. Puhakka. A prototype system for generative process planning of prismatic parts. In A. Kusiak, editor, Modern Production Management Systems. North-Holland Publishing Co., 1987. (Proc. IFIP TC5/WG5.7 Working Conf. on Advances in Production Management Systems, Winnipeg, Canada, Aug 1987).
MOP89: M. Mäntylä, J. Opas, and J. Puhakka. Generative process planning of prismatic parts by feature relaxation. In B. Ravani, editor, Advances in Design Automation 1989, pages 49 -- 60. American Society of Mechanical Engineers, New York, NY, 1989. (Proc. 15th ASME Design Automation Conf., Montreal, Canada, Sept 1989, pp. 49 -- 60).
MP93: S. Meeran and M. J. Pratt. Automated feature recognition from 2D drawings. Computer Aided Design, 25, 1, 7 -- 17, 1993.
MPK93: S. Meeran, M. J. Pratt, and J. M. Kay. The use of PROLOG in the automatic recognition of manufacturing features from 2D drawings. Engineering Applications of Artificial Intelligence, 6, 5, 409 -- 423, 1993.
MPRW93a: P. V. Mahajan, C. Poli, D. W. Rosen, and M. J. Wozny. Design for stamping: A feature-based approach. In Proc. ASME National Design Engineering Show & Conference, Chicago, IL, March 1993. American Society of Mechanical Engineers, New York, NY, 1993. (Also Technical Report 92015, Design Research Center, Rensselaer Polytechnic Institute, Troy, NY).
MPRW93b: P. V. Mahajan, C. Poli, D. W. Rosen, and M. J. Wozny. Features and algorithms for tooling cost evaluation for stamping. In Towards World Class Manufacturing '93. North-Holland Publishing Co., in preparation, 1993. (Proc. Conf. held in Phoenix, AZ, Sept. 1993. Available as Technical Report 930??, Design & Manufacturing Institute, Rensselaer Polytechnic Institute, Troy, NY).
MR92: F. L. Merat and G. M. Radack. Automatic inspection planning within a feature-based CAD system. Robotics & Computer Integrated Manufacturing, 9, 1, 61 -- 69, 1992.
MS84: F. Mill and S. Spragget. Artificial intelligence for production planning. Computer-Aided Engineering Journal, 1, 7, 210 -- 213, 1984.
MS88: Y. Maeda and K. Shinohara. Geometric reasoning and organized optimization for automated process planning. In Proc. AAAI 7th National Conf. on Artificial Intelligence, St. Paul, MN, Aug. 1988. American Association for Artificial Intelligence, 1988.
MSNK90: H. Masuda, K. Shimada, M. Numao, and S. Kawabe. A mathematical theory and applications of non-manifold geometric modelling. In F.-L. Krause and H. Jansen, editors, Advanced Geometric Modelling for Engineering Applications. North-Holland Publishing Co., 1990. (Proc. GI/IFIP International Symposium, Berlin, Germany, Nov. 1989).
MV91: F. Mandorli and I Vicini. A form features automatic recognition system. Preprint for ICAR '91, Pisa, Italy, June 1991.
MW89: J. L. Murray and M. H. Williams. Knowledge-based systems in process planning and assembly design. In J. R. Woodwark, editor, Geometric Reasoning. Oxford University Press, 1989.
MYB91: E. Molloy, H. Yang, and J. Browne. Design for assembly within concurrent engineering. Ann. CIRP, 40, 1, 107 -- 110, 1991.
Nat90: V. Nathan. Automated NC. Proc. SME Autofact Conf., Detroit, MI, Nov. 1990, Society of Manufacturing Engineers, 1990.
Nau87: D.S. Nau. Automated process planning using hierarchical abstraction. Texas Instruments Technical J., Winter 1987, 39 -- 46, 1987.
NCA88: B. O. Nnaji, J.-Y. Chu, and M. Akrep. A schema for CAD-based robot assembly task planning for CSG-modeled objects. J. Manufacturing Systems, 7, 2, 131 -- 145, 1988.
NDS87: E. H. Nielsen, J. R. Dixon, and M. K. Simmons. How shall we represent the geometry of designed objects? Technical Report 6-87, Mechanical Design Automation Laboratory, University of Massachusetts, Amherst, MA, 1987.
NDZ91: E. H. Nielsen, J. R. Dixon, and G. E. Zinsmeister. Capturing and using designer intent in a design-with-features system. In Design Theory and Methodology. American Society of Mechanical Engineers, New York, NY, 1991. (ASME Publication DE-Vol. 31, pp. 95 -- 102).
NG86: D. S. Nau and M. Gray. SIPS: An application of hierarchical knowledge clustering to process planning. In Integrated and Intelligent Manufacturing. American Society of Mechanical Engineers, New York, NY, 1986. (Proc. ASME Winter Annual Meeting, Anaheim, CA, Dec 1986; ASME Publication PED-Vol. 21).
Nie90: E. H. Nielsen. Designing Mechanical Components with Features. PhD thesis, Mechanical Engineering Dept., University of Massachusetts at Amherst, Amherst, MA, 1990.
NIK88: D. S. Nau, N. Ide, R. Karinthi, G. Vanecek, and Q. Yang. Solid modeling and geometric reasoning for design and process planning. Technical Report CS-TR-2056 (UMIACS-TR-88-47), Computer Science Dept., University of Maryland, 1988. (Also in Proc. AAAI Workshop on Production Planning & Scheduling, ?? where ??, Aug 1988).
NK89: D. S. Nau and R. Karinthi. An algebraic approach to feature interactions. Technical Report CS-TR-2363 (SRC-TR-89-101), Computer Science Dept., University of Maryland, 1989.
NK90: B. O. Nnaji and T.-S. Kang. Interpretation of CAD models through neutral geometric knowledge. Artificial Intelligence in Engineering Design and Manufacture, 4, 1, 15 -- 44, 1990.
NKM90: J. Nieminen, J. Kanerva, and M. Mäntylä. Feature-based design of joints. In F.-L. Krause and H. Jansen, editors, Advanced Geometric Modelling for Engineering Applications. North-Holland Publishing Co., 1990. (Proc. GI/IFIP International Symposium, Berlin, Germany, Nov. 1989).
NL90: B. O. Nnaji and H.-C. Liu. Feature reasoning for automatic robot assembly and machining in polyhedral representation. Int. J. Production Research, 28, 3, 517 -- 540, 1990.
Nna88: B. O. Nnaji. Machine reasoning and understanding of manufacturing operations. Proc. 2nd Intl. Symp. on Robotics & Manufacturing: Research, Education & Applications, Albuquerque, NM, 16-18 Nov 1988, 1988.
NT91: J. Nieminen and J. Tuomi. Design with features for manufacturing cost analysis. In ????????????????????, editor, ???????????????????? North-Holland Publishing Co., 1991. (Proc. IFIP WG 5.2 Workshop on Geometric Modeling in Computer-Aided Design, Rensselaerville, NY, Sept. 1990).
NZG92: D. S. Nau, G. Zhang, and S. K. Gupta. Generation and evaluation of alternative operation sequences. In A. R. Thangaraj, A. Bagchi, M. Ajanappa, and D. K. Anand, editors, Quality Assurance through Integration of Manufacturing Processes and Systems. American Society of Mechanical Engineers, New York, NY, 1992. (Proc. 1992 ASME Winter Annual Meeting, Publication No. PED-Vol. 56, pp. 93 -- 108).
OJ94: J. Ovtcharova and U. Jasnoch. An integration of feature-based design and consistency management in CAD applications. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
OM88: J. Opas and M. Mäntylä. Introducing manufacturing knowledge into intelligent CAD systems. Proc IFIP WG5.2 Meeting on Intelligent Design, Cambridge, England, Sept. 1988, 1988.
OM94: J. Opas and M. Mäntylä. Feature-based part programming. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 239 -- 259. Elsevier Science B.V., 1994.
OPR92: J. Ovtcharova, G. Pahl, and J. Rix. A proposal for feature classification in feature-based design. Computers & Graphics, 16, 2, 187 -- 195, 1992.
Ost86: M. C. Ostrowski. A method for feature oriented design using constructive solid geometry. Technical report, Automation Systems Laboratory, General Electric Corporate Research & Development Center, Schenectady, NY, 1986.
Ost87: M. C. Ostrowski. A prototype feature modeler using constructive solid geometry. Technical report, Automation SystemsLaboratory, General Electric Corporate Research & Development Center, Schenectady, NY, 1987.
Ovt90: J. Ovtcharova. Feature-based solid modelling by using a sweeping based approach. Proc. YUGRAPH 90, 4th Intl. Conf. on Computer Graphics, Dubrovnik, Yugoslavia, 20 -- 22 Jun 1990, 1990.
Ovt92: J. Ovtcharova. FeatureFrame: Feature-based framework in an open CAD environment. Preprint and overheads from IFIP WG5.2 Workshop on Geometric Modeling in CAD, Rensselaerville, NY, 27 Sep -- 1 Oct 1992, 1992. (Paper not included in Proceedings).
P90: P. Prabhu et al. An operations network generator for computer aided process planning. J. Manufacturing Systems, 9, 4, 283 -- 291, 1990.
PAB78: R. J. Popplestone, A. P. Ambler, and I. M. Bellos. RAPT: A language for describing assemblies. The Industrial Robot, ?????, Sept. 1978, 1978.
PAB80: R. J. Popplestone, A. P. Ambler, and I. M. Bellos. An interpreter for a language for describing assemblies. Artificial Intelligence, 14, ?????????, 79 -- 107, 1980.
Par83: A. Parkinson. Feature recognition and parts classification in BUILD. Technical Report CAM-112, Cambridge University CAD Group, 1983. (Obtainable from School of Industrial and Manufacturing Science, Cranfield Institute of Technology, England).
Par86: A. Parkinson. The use of solid models in BUILD as a database for NC machining. In ???, editor, Proc. PROLAMAT 85, Paris, June 1985. ???, 1986?
PC89: R. D. Parks and T. R. Chase. Representing mechanical parts using feature specifications and positional constraints: A contrast with PDES. In Engineering Database Management: Leadership for the '90's. American Society of Mechanical Engineers, New York, NY, 1989.
PCL90: D.-B. Perng, Z. Chen, and R.-K. Li. Automatic 3D machining feature extraction from 3D CSG solid input. Computer Aided Design, 22, 5, 285 -- 295, 1990.
PDD85: PDDI. Product definition data interface - system test report. Technical Report STR560130000, Prepared by McDonnell Aircraft for Materials Lab, Wright Patterson Airforce Base, 1985.
PDM91: C. Poli, P. Dastidar, and P. V. Mahajan. Design for stamping: Part I --- Analysis of part attributes that impact die construction costs for metal stampings. In Proc. 1991 Design Theory & Methodology Conf., Miami, FL, Sept. 1991. American Society of Mechanical Engineers, New York, NY, 1991.
PEF88: C. Poli, J. Escudero, and R. Fernandez. How part design affects injection-moulding tool cost. Machine Design, 24 Nov., 1988.
Per88: D.-B. Perng. Automatic 3D Machining Feature Extraction from 2D CAD Data. PhD thesis, National Chiao Tung University, Taiwan, 1988.
Pet92a: T. J. Peters. Combinatorial analysis for feature recognition. Proc. 4th Int. Conf. on Design Theory & Methodology, Scottsdale, AZ, Sept 1992, 1992.
Pet92b: G. Petras. FREDS: A feature-based design system for mechanical parts. Master's thesis, Rensselaer Design Research Center, Rensselaer Polytechnic Institute, Troy, NY, 1992. (RDRC Technical Report 92033).
PF89: C. Poli and L. Fredette. Product design for economical die casting --- the influence of part shape on tooling cost. In Proc. 15th International Die Casting Congress, St. Louis, MO, Oct. 1989.
PFP89: J. M. Pinilla, S. Finger, and F. B. Prinz. Shape feature description and recognition using an augmented topology graph grammar. Proc. NSF Engineering Design Research Conf., University of Massachusetts, Amherst, MA, June 1989, 1989.
PH92: S. Prabhakar and M. R. Henderson. Automatic form-feature recognition using neural-network-based techniques on boundary representations of solid models. Computer Aided Design, 24, 7, 381 -- 393, 1992.
PHP86: S. G. Pavey, S. R. Hailstone, and M. J. Pratt. An automated interface between CAD and process planning. In J. A. McGeough, editor, Computer Aided Production Engineering. Mechanical Engineering Publications Ltd., Bury St. Edmunds, England, 1986. (Proc. International Conf., Edinburgh, April 1986).
PK93: J. Y. Park and B. Khoshnevis. A real-time computer-aided process planning system as a suuport tool for economic product design. J. Manufacturing Systems, 12, 2, 181 -- 193, 1993.
PL91a: J. C. Park and K. W. Lee. Computer aided design of a mold cavity with proper rigging system for casting processes: Part 2. ASME J. Engineering for Industry, 113, 1, 67 -- 74, 1991.
PL91b: J. C. Park and K. W. Lee. Computer aided design of a pattern and riser for casting processes: Part 1. ASME J. Engineering for Industry, 113, 1, 59 -- 66, 1991.
PM88a: H. D. Park and O. R. Mitchell. CAD based planning and execution of inspection. Proc. IEEE Conf. on Computer Vision & Pattern Recognition, Ann Arbor, MI, June 1988, 1988.
PM88b: R. M. Patel and A. J. McLeod. Engineering feature description in mechanical engineering design. Computer-Aided Engineering Journal, 5, 5, 180 -- 183, 1988.
PM88c: R. M. Patel and A. J. McLeod. The implementation of a mechanical engineering design interface using engineering features. Computer-Aided Engineering Journal, 5, 6, 241 -- 246, 1988.
PM90: K. Preiss and O. Meron. Variant and generative methods for constructing solid data from 2D projections. In M. J. Wozny, J. U. Turner, and K. Preiss, editors, Geometric Modeling for Product Engineering. North-Holland Publishing Co., 1990. (Proc. IFIP WG5.2/NSF Working Conf., Rensselaerville, NY, Sept. 1988).
PMD92: C. Poli, P. V. Mahajan, and P. Dastidar. Design for stamping: Part II --- Quantification of part attributes on the tooling cost for small parts. In Proc. 1992 Design Theory & Methodology Conf., Phoenix, AZ,. American Society of Mechanical Engineers, New York, NY, Sept. 1992.
PMK91: D. T. Pham, K. F. Martin, and L. P. Khoo. A knowledge-based preprocessor generator for coordinate measuring machines. Int. J. Production Research, 29, 4, 677 -- 694, 1991.
PP90: S. S. Pande and B. S. Prabhu. An expert system for automatic extraction of machining features and tooling selection for automats. Computer-Aided Engineering Journal, 7, 4, 99 -- 103, 1990.
PPPB86: S. G. Pavey, J. Pinte, M. J. Pratt, and P. Bunce. Feature extraction and process planning. Technical Report R-86-GM/PP-01, Computer Aided Manufacturing International, Inc., Arlington, TX, 1986.
Pra84: M. J. Pratt. Solid modeling and the interface between design and manufacture. IEEE Computer Graphics & Applications, 4, 7, 52 -- 59, 1984.
Pra86: M. J. Pratt. Current status of form features research in a solid modelling context. Internal report, Automation Systems Laboratory, General Electric Corporate Research & Development Center, Schenectady, NY, 1986.
Pra87: M. J. Pratt. Conceptual design of a feature-oriented solid modeller -- issues of topological representation. Internal report, Automation Systems Laboratory, General Electric Corporate Research & Development Center, Schenectady, NY, 1987.
Pra88: M. J. Pratt. Synthesis of an optimal approach to form feature modelling. In Proc. 1988 Computers in Engineering Conf., San Francisco. American Society of Mechanical Engineers, July/Aug. 1988.
Pra90: M. J. Pratt. A hybrid feature-based modelling system. In F.-L. Krause and H. Jansen, editors, Advanced Geometric Modelling for Engineering Applications, pages 177 -- 189. North-Holland Publishing Co., 1990. (Proc. GI/IFIP International Symposium, Berlin, Germany, Nov. 1989).
Pra91: M. J. Pratt. Aspects of form feature modelling. In H. Hagen and D. Roller, editors, Geometric Modelling: Methods and Applications. Springer-Verlag, 1991. (Proc. Eurographics/GI Workshop, Böblingen, Germany, May 1990).
Pra92: V. Prabhakar. DESIDE-X: Knowledg-based System for Finite Element Idealizations. PhD thesis, Stanford University, ????1992.
Pra93a: M. J. Pratt. Applications of feature recognition in the product life-cycle. Int. J. Computer Integrated Manufacture, 6, 1&2, 13 -- 19, 1993.
Pra93b: M. J. Pratt. Automated feature recognition and its role in product modelling. Computing, Supplement 8, 241 -- 250, 1993. (Published by Springer-Verlag as Geometric Modelling, editors G. Farin, H. Hagen & H. Noltemeier, 1993).
Pra95: M. J. Pratt. Virtual prototypes and product models in mechanical engineering. Technical Report NISTIR 5650, National Institute of Standards & Technology, Gaithersburg, MD 20899, May 1995. (To appear in Proc. IFIP WG5.10 Workshop on Virtual Prototyping, Providence, RI, Sept 1994; Chapman & Hall, London, in preparation).
Pre84: K. Preiss. Constructing the solid representation from engineering projections. Computers & Graphics, 8, 4, 381 -- 389, 1984.
PS91: C. Poli and S. Shanmugasundaram. Design for die casting --- a group technology based approach. In Proc. 1991 ASME Design Theory & Methodology Conf., Miami, FL. American Society of Mechanical Engineers, New York, NY, Sept. 1991.
PSD90: S. K. Padhy, R. Sharan, and S. N. Dwivedi. Feature based approach for casting design. In J. Rinderle, editor, Design Theory and Methodology -- DTM '90. American Society of Mechanical Engineers, New York, NY, 1990. (Proc. Conf. in Chicago, IL, 16 -19 Sept 1990; ASME Publication DE-Vol. 27).
PW85: M. J. Pratt and P. R. Wilson. Requirements for the support of form features in a solid modelling system. Technical Report R-85-ASPP-01, Computer Aided Manufacturing International, Inc., Arlington, TX, 1985.
PW89: R. J. Popplestone and R. Weiss. Exploiting feature symmetries in deciding how to make bodies. Proc. 13th SME Robots Conf., Gaithersburg, MD, 7 -- 11 May 1989, 1989.
PW90: S. S. Pande and M. G. Walvekar. PRICAPP: A computer assisted process planning system for prismatic components. Int. J. Production Research, 28, 2, 279 -- 292, 1990.
PW91: P. Prabhu and H. P. Wang. Algorithms for computer-aided generative process planning. Int. J. Advanced Manufacturing Technology, 6, 1, 3 -- 15, 1991.
PYK92: J. Pabon, R. Young, and W. Keirouz. Integrating parametric geometry, features and variational modelling for conceptual design. Int. J. Systems Automation: Research & Applications, 2, 1, 17 -- 36, 1992.
RBL89: U. Roy, P. Banerjee, and C. R. Liu. Design of an automated assembly environment. Computer Aided Design, 21, 9, 561 -- 569, 1989.
RBN88: J. Rossignac, P. Borrel, and L. Nackman. Interactive design with sequences of parameterized transformations. Technical Report RC13740, Design Automation Group, IBM T.J. Watson Research Center, Yorktown Heights, NY, 1988.
RC85: A. A. G. Requicha and S. Chan. Representation of geometric features, tolerances and attributes in solid modelers based on CSG. Technical Report TM 48, Production Automation Project, University of Rochester, N.Y., also published in IEEE J. Robotics & Automation RA-2, 3, 156 -- 166, 1985. (Also published in IEEE J. Robotics & Automation 2, 3, 156 -- 166, 1986).
RC94: A. Rharmaoui and A. Crosnier. Definition of an integrator principle dedicated to the design activity. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
RCNT94: D. Rieu, D. Constant, G. T. Nguyen, and M. Tollenaere. Conception intégrée des liaisons méchaniques. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
RD92: D. W. Rosen and J. R. Dixon. Languages for feature-based design and manufacturability evaluation. Int. J. Systems Automation: Research and Applications, 2, 4, 353 -- 373, 1992.
RDD91: D. W. Rosen, J. R. Dixon, and X. Dong. A methodology for conversions of feature-based representations. In Proc. ASME Design Theory & Methodology Conf., Miami, FL, Sept. 1991. American Society of Mechanical Engineers, New York, NY, 1991. (Also Technical Report 91029, Design Research Center, Rensselaer Polytechnic Institute, Troy, NY).
RDPD92: D. W. Rosen, J. R. Dixon, C. Poli, and X. Dong. Features and algorithms for tooling cost evaluation in injection molding and die casting. In Proc. 1992 Computers in Engineering Conf., San Francisco, CA. American Society of Mechanical Engineers, New York, NY, 1992.
Req83: A. A. G. Requicha. Towards a theory of geometric tolerancing. Int. J. Robotics research, 2, 4, 45 -- 60, 1983.
Req84: A. A. G. Requicha. Representation of tolerances in solid modeling: Issues and alternative approaches. In M. S. Pickett and J. W. Boyse, editors, Solid Modeling by Computers: From Theory to Applications. Plenum Press, New York, NY, 1984. (Proc. General Motors Solid Modeling Symposium, Warren, MI, Sept 1983).
Req93: A. A. G. Requicha. Mathematical definition of tolerance specifications. ASME Manufacturing Review, 6, 4, 269 -- 274, 1993.
RF88: P. Ranyak and R. Fridshal. Features for tolerancing a solid model. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988, 1988.
RFD92: D. W. Rosen, S. Finger, and J. R. Dixon. Conversions of feature-based representations via graph grammar parsing. In Proc. ASME Design Theory & Methodology Conf., *** WHERE ***, Sept. 1992. American Society of Mechanical Engineers, New York, NY, 1992.
RFM93: L. Rivest, C. Fortin, and C. Morel. Tolerancing a solid model with a kinematic formulation. In J. Rossignac, J. U. Turner, and G. Allen, editors, Second Symposium on Solid Modeling and Applications. Association for Computing Machinery, New York, NY, 1993. (Proc. ACM Symposium, Montreal, Canada, May 1993).
RGN94a: W. C. Regli, S. K. Gupta, and D. S. Nau. Extracting alternative machining features: An algorithmic approach. Technical Report ISR-TR94-55, CS-TR-3329, UMIACS-TR-94-95, The University of Maryland, 1994.
RGN94b: W. C. Regli, S. K. Gupta, and D. S. Nau. Feature recognition for manufacturability analysis. Technical Report 94-10, Institute for Systems Research, University of Maryland, 1994.
RGN94c: W. C. Regli, S. K. Gupta, and D. S. Nau. Feature recognition for manufacturability analysis. In K. Ishii, editor, Proc. 1994 ASME Computers in Engineering Conference, pages 93--104. American Society of Mechanical Engineers, New York, NY, September 1994.
RHCE89: A. Razdan, M. R. Henderson, P. F. Chavez, and P. A. Erickson. Feature-based object decomposition for finite element meshing. The Visual Computer, 5, 291 -- 303, 1989.
RIK89: M. Ranta, M. Inui, and F. Kimura. A process planning system for procucibility feedback to designers. In F. Kimura and A. Rolstadås, editors, Proc. 3rd IFIP Conf on Computer Applications in Production & Engineering (CAPE), Tokyo, Japan. North-Holland Publishing Co., 1989.
RIKM93: M. Ranta, M. Inui, F. Kimura, and M. Mäntylä. Cut and paste based modeling with boundary features. In J. Rossignac, J. U. Turner, and G. Allen, editors, Second Symposium on Solid Modeling and Applications. Association for Computing Machinery, New York, NY, 1993. (Proc. ACM Symposium, Montreal, Canada, May 1993).
RK89: L. M. Rosario and W. A. Knight. Design for assembly analysis: Extraction of geometric features from a CAD system data base. Ann. CIRP, 38, 1, 13 -- 16, 1989.
RK91: L. M. Rosario and W. A. Knight. Data base implementation to extract geometric features from CAD system's part data. Proc. 19th SME North American Manufacturing Research Conf., Rolla, MO, May 1991, 1991.
RL87: D. N. Rocheleau and K. W. Lee. System for interactive assembly modelling. Computer Aided Design, 19, 2, 65 -- 71, 1987.
RL88a: U. Roy and C. R. Liu. Establishment of functional relationships between components in an assembly database. Computer Aided Design, 20, 10, 570 -- 580, 1988.
RL88b: U. Roy and C. R. Liu. Feature based representational scheme of a solid modeler for providing dimensioning and tolerancing information. Robotics & Computer Integrated Manufacturing, 4, 3&4, 335 -- 345, 1988.
RLTK94: L. Rémondini, J. C. Léon, P. Trompette, and M. Kutniak. L'approche par entités dans la modélisation des structures mécaniques. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
RLW91: U. Roy, C. R. Liu, and T. C. Woo. Review of dimensioning and tolerancing representation and processing. Computer Aided Design, 23, 7, 466 -- 483, 1991.
RN93: W. C. Regli and D. S. Nau. Building a general approach to feature recognition of material removal shape element volumes (MRSEVs). In J. Rossignac, J. U. Turner, and G. Allen, editors, Second Symposium on Solid Modeling and Applications. Association for Computing Machinery, New York, NY, 1993. (Proc. ACM Symposium, Montreal, Canada, May 1993).
RN94: W. C. Regli and D. S. Nau. Recognition of volumetric features from CAD models: Problem formalization and algorithms. Research in Engineering Design, Submitted for publication, 1994. (Also Technical Report TR 93-41, University of Maryland, Institute for Systems Research, College Park, MD, 1993).
Rob91: A. F. Roberts. Solid modeling: Trends and new directions. Proc. SME Autofact Conf., Chicago, IL, 10 -- 14 Nov 1991, 1991.
Rol89: D. Roller. Design by features: An approach to high-level shape manipulation. Computers in Industry, 12, 185 -- 191, 1989.
Ros90: J. Rossignac. Issues on feature-based editing and interrogation of solid models. Computers & Graphics, 14, 2, 149 -- 172, 1990.
Ros91a: L. M. Rosario. A representation scheme for mechanical assemblies that supports the early design stages. Proc. 1991 SME/NSF Conf. on Design & Manufacturing Systems, Austin, TX, Jan. 1991, 1991.
Ros91b: D. W. Rosen. A graph grammar for thin-walled mechanical components. Technical Report UM6, Dept. of Mechanical Engineering, University of Massachusetts at Amherst, Amherst, MA, 1991.
Ros92: D. W. Rosen. A Feature-Based Representation to Support the Design Process and the Manufacturability Evaluation of Mechanical Components. PhD thesis, Dept of Mechanical Engineering, University of Massachusetts at Amherst, Amherst, MA, 1992.
RV88: A. A. G. Requicha and J. H. Vandenbrande. Automated systems for process planning and part planning. In A. Kusiak, editor, Artificial Intelligence: Implications for CIM. Springer-Verlag, 1988.
RV89: A. A. G. Requicha and J. H. Vandenbrande. Form features for mechanical design and manufacturing. In Proc. 1989 Computers in Engineering Conf., Anaheim, CA. American Society of Mechanical Engineers, New York, NY, 1989.
S90: T. Smithers et al. Design as intelligent behaviour: An AI in design research programme. Artificial Intelligence in Engineering, 5, 2, 78 -- 109, 1990.
S91a: T. Sthanusubramonian et al. Transformation from functional specifications to physical form. Proc. 1991 SME/NSF Conf. on Design & Manufacturing Systems, Austin, TX, Jan. 1991, 1991.
S91b: C. J. Su et al. Generalised CSG: a solid modeling basis for high productivity CAD systems. Proc. SME Autofact Conf., Chicago, IL, 10 -- 14 Nov 1991, 1991.
SB88: J. J. Shah and A. Bhatnagar. Automatic group technology classification from feature models. Proc. 16th SME National Conf. on Advanced Manufacturing & Robotics, Urbana, IL, 24 -- 27 May 1988, 1988.
SB89: J. J. Shah and A. S. Bhatnagar. Group technology classification from feature-based geometric models. ASME Manufacturing Review, 2, 3, 204 -- 213, 1989.
SBC93: K. Shimada, B. Balents, and Gossard. D. C. Automatic mesh reconstruction for feature-based sculpting of deformable surfaces. In P. R. Wilson, M. J. Wozny, and M. J. Pratt, editors, Geometric Modeling for Product Realization. North-Holland Publishing Co., 1993. (Proc. IFIP WG5.2 Workshop on Geometric Modeling in CAD, Rensselaerville, NY, 27 Sep - 1 Oct 1992).
SBH88: J. J. Shah, A. Bhatnagar, and D. Hsiao. Feature mapping and application shell. In Proc. 1988 Computers in Engineering Conf., San Francisco, July/Aug. 1988. American Society of Mechanical Engineers, New York, NY, 1988.
SBRU94: J. J. Shah, G. Balakrishnan, M. T. Rogers, and S. D. Urban. Comparative study of procedural and declarative feature based geometric modeling. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
SC91: R. L. Sakal and J. G. Chow. Design and development of an integrated CAD/CAPP/CAM machining system for prismatic parts. Proc. 19th SME North American Manufacturing Research Conf., Rolla, MO, May 1991, 1991.
SC92: A. Srikantappa and R. H. Crawford. Intermediate geometric and inter-feature relationships for automatic GT part coding. In Proc. 1992 ASME Computers in Engineering Conf., San Francisco. American Society of Mechanical Engineers, New York, NY, 1992.
SC93: H. Sakurai and C.-W. Chin. Form feature recognition by spatial decomposition and composition. In P. R. Wilson, M. J. Wozny, and M. J. Pratt, editors, Geometric Modeling for Product Realization, pages 189 -- 203. North-Holland Publishing Co., 1993. (Proc. IFIP WG5.2 Workshop, Rensselaerville, NY, 27 Sep - 1 Oct 1992).
SC94a: H. Sakurai and C.-W. Chin. Definition and recognition of volume features for process planning. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 65 -- 80. Elsevier Science B.V., 1994.
SC94b: A. B. Srikantappa and R. H. Crawford. Automatic part coding based on interfeature relationships. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 215 -- 237. Elsevier Science B.V., 1994.
SD92: N. Singh and Q. Dengzhou. A structural framework for part feature recognitiotn: A link between computer aided design and process planning. Integrated Manufacturing Systems, 3, 1, 4 -- 12, 1992. (CHECK THIS REFERENCE! JOURNAL NAME?).
SdMZ90: A. C. Sanderson, L. Homem de Mello, and H. Zhang. Assembly sequencing planning. AI Magazine, 11, 1, 62 -- 81, 1990.
SF90: R. Srinivasan and P. Ferreira. Geometric models of machining processes for computer aided process planning. In M. J. Wozny, J. U. Turner, and K. Preiss, editors, Geometric Modeling for Product Engineering. North-Holland Publishing Co., 1990. (Proc. IFIP WG5.2/NSF Working Conf., Rensselaerville, NY, Sept. 1988).
SG88: H. Sakurai and D. C. Gossard. Shape feature recognition from 3D solid models. Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988; American Society of Mechanical Engineers, 1988.
SG90: H. Sakurai and D. C. Gossard. Recognizing shape features in solid models. IEEE Computer Graphics & Applications, 9, (Sept 1990 ????), 22 -- 32, 1990.
SG91: H. Sakurai and D. C. Gossard. Geometric modeling in setup planning and fixture design. In ????? North-Holland Publishing Co., 1991. (IFIP Workshop on Geometric Modeling in Computer-Aided Design, Rensselaerville, Sept. 1990 DID A PAPER APPEAR???).
SHA83: S. M. Staley, M. R. Henderson, and D. C. Anderson. Using syntactic pattern recognition to extract feature information from a solid geometric data base. Computers in Mechanical Engineering, Sept. 1983, 61-66, 1983.
Sha86: J. J. Shah. A scheme for CAD/CAPP integration through group technology. Internal Report, Automation Systems Laboratory, General Electric Corporate Research & Development Center, Schenectady, NY, 1986.
Sha88a: J. J. Shah. Feature transformations between application-specific feature spaces. Computer-Aided Engineering Journal, 5, 6, 247 -- 255, 1988.
Sha88b: J. J. Shah. Synthesis of initial form for structural shape optimization. Trans. ASME, 110, 564 -- 570, 1988.
Sha88c: A. Sharma. An improved mechanical engineering design interface for a solid geometric modeller. MPhil thesis, Dept. of Mechanical Engineering, Newcastle Polytechnic, England, 1988.
Sha90: H. Shariat. A model-based technique for recognizing objects in images. Proc. SME Vision 90 Conf., Detroit, MI, Nov. 1990, 1990.
Sha91a: J. J. Shah. Assessment of features technology. Computer Aided Design, 23, 5, 331 -- 343, 1991.
Sha91b: J. J. Shah. Conceptual development of form features and feature modelers. Research in Engineering Design, 2, 93 -- 108, 1991.
SHdM90: A. C. Sanderson and L. S. Homem de Mello. Automatic generation of automatic assembly sequences. In M. J. Wozny, J. U. Turner, and K. Preiss, editors, Geometric Modeling for Product Engineering. North-Holland Publishing Co., 1990. (Proc. IFIP WG5.2/NSF Working Conf., Rensselaerville, NY, Sept. 1988).
She88: M. S. Shepherd. Geometric modeling needs of finite element modeling. In M. J. Wozny, H. W. McLaughlin, and J. Encarnaçao, editors, Geometric Modeling for CAD Applications. North-Holland Publishing Co., 1988. (Proc. IFIP WG5.2 Working Conf., Rensselaerville, NY, May 1986).
She90: M. S. Shepherd. A modelling framework for controlling structural idealizations in engineering design. Computers & Structures, 37, 2, 181 -- 191, 1990.
SHH90: D. L. Spooner, M. Hardwick, E. Hvannberg, B. Downie, A. Faulstich-Brady, D. Loffredo, A. Mehta, and D. B. Sanderson. The evolution of ROSE: An engineering object-oriented database system. In Proc. 2nd Conf. on CIM, Rensselaer Polytechnic Institute, Troy, NY, May 1990.
SHL93: J. J. Shah, D. Hsiao, and J. Leonard. A systematic approach for design-manufacturing feature mapping. In P. R. Wilson, M. J. Wozny, and M. J. Pratt, editors, Geometric Modeling for Product Realization. North-Holland Publishing Co., 1993. (Proc. IFIP WG5.2 Workshop on Geometric Modeling in CAD, Rensselaerville, NY, 27 Sep - 1 Oct 1992).
SHR90: J. J. Shah, D. Hsiao, and R. Robinson. A framework for manufacturability evaluation in a feature-based CAD system. In Proc. NSF Design & Manufacturabilty Research Conf., Tempe, AZ, 1990.
SJ89: V. Srinivasan and R. Jayaraman. Geometric tolerancing II: Conditional tolerances. IBM J. Research & Development, 33, 2, 105 -- 124, 1989.
SKH84: T. Sata, F. Kimura, H. Hiraoka, H. Suzuki, S. Shimura, Y. Taguchi, M. Miki, and M. Inui. Manufacturing preparation by use of product model in computer. Robotics & Computer Integrated Manufacturing, 1, 3/4, 261 -- 270, 1984.
SL87: R. Srinivasan and C. R. Liu. On some important geometric issues in generative process planning. Proc. ASME Winter Ann. Meeting, Boston, MA, Dec 1987, 1987.
SL91: S. Subramaniam and S. C. Lu. The impact of an AI-based design environment for simultaneous engineering on process planning. Int. J. Computers in Manufacturing, 4, 2, 71 -- 82, 1991.
SLF85: R. Srinivasan, C. R. Liu, and K. S. Fu. Extraction of manufacturing details from geometric models. Computers & Industrial Engineering, 9, 2, 125 -- 134, 1985.
SLT94: O. Sénéchal, T. Lenclud, and C. Tahon. Production costs evaluation -- integration and simulation for production costing in a value analysis process. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
SM89: J. J. Shah and D. W. Miller. A structure for integrating geometric tolerances with form features and geometric models. In Proc. 1989 Computers in Engineering Conf. American Society of Mechanical Engineers, New York, NY, 1989.
SM90: J. J. Shah and D. W. Miller. A structure for supporting geometric tolerances in product definition systems for CIM. ASME Manufacturing Review, 1, 1, 23 -- 31, 1990.
SM91: J. J. Shah and A. Mathew. Experimental investigation of the STEP form-feature information model. Computer Aided Design, 23, 4, 282 -- 296, 1991.
SMN94a: J. J. Shah, M. Mäntylä, and D. S. Nau, editors. Advances in Feature-based Manufacturing. Elsevier Science B.V., 1994.
SMN94b: J. J. Shah, M. Mäntylä, and D. S. Nau. Introduction to feature-based manufacturing. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 1 -- 11. Elsevier Science B.V., 1994.
SNMK89: K. Shimada, M. Numao, H. Masuda, and S. Kawabe. Constraint-based object description for product modeling. In F. Kimura and A. Rolstadås, editors, Computer Applications in Production and Engineering. North-Holland Publishing Co., 1989. (Proc CAPE '89, 3rd Intl. IFIP Conf. on Computer Applications in Production & Engineering, Tokyo, Oct 1989).
SR88a: J. J. Shah and M. T. Rogers. Expert form feature modelling shell. Computer Aided Design, 20, 9, 515 -- 524, 1988.
SR88b: J. J. Shah and M. T. Rogers. Feature-based modeling shell: Design and implementation. In Proc. 1988 Computers in Engineering Conf., San Francisco, July/Aug 1988. American Society of Mechanical Engineers, New York, NY, 1988.
SR88c: J. J. Shah and M. T. Rogers. Functional requirements and conceptual design of the feature-based modelling system. Computer-Aided Engineering Journal, 5, 1, 9 -- 15, 1988.
SR88d: J. J. Shah and M. T. Rogers. Geometric modeling for automated manufacturing. Proc. 16th SME North American Manufacturing Research Conf. (NAMRC), Urbana, IL, 24-27 May 1988, 1988.
SR93: A. J. Spyridi and A. A. G. Requicha. Automatic planning for dimensional inspection. ASME Manufacturing Review, 6, 4, 314 -- 319, 1993.
SR94: J. J. Shah and M. T. Rogers. A testbed for rapid prototyping of feature-based applications. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 423 -- 453. Elsevier Science B.V., 1994.
Sre90: P. C. Sreevalsan. An investigation into the unification of form feature definition methods. Master's thesis, Arizona State University, Tempe, AZ, 1990.
Sri93: V. Srinivasan. The role of sweeps in tolerancing semantics. ASME Manufacturing Review, 6, 4, 275 -- 281, 1993.
SRS90: P. Sreevalsan, M. T. Rogers, and J. J. Shah. Object oriented tools for feature database design. In Proc. ASME Winter Annual Meeting, Dallas, TX, 1990.
SRS91: J. J. Shah, M. T. Rogers, P. C. Sreevalsan, D. Hsiao, A. Mathew, A. Bhatnagar, B. Liou, and D. W. Miller. The ASU Features Testbed: An overview. In Proc. 1991 Computers in Engineering Conf. American Society of Mechanical Engineers, New York, NY, 1991.
SS89: M. E. Ssemakula and A. Satsangi. Application of PDES to CAD/CAPP integration. Computers & Industrial Engineering, 17, 1 -- 4, 227 -- 233, 1989. (Proc. 11th Conf. on Computers & Industrial Engineering, Orlando, FL, when???).
SS91: P. C. Sreevalsan and J. J. Shah. Unification of form feature definition methods. Proc. IFIP WG5.2 Workshop on Intelligent CAD, Columbus, OH, Sept. 1991, 1991.
SS94: H. Schultz and K. Schützer. FINDES -- integrating design and manufacturing. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
SSM91: J. J. Shah, P. Sreevalsan, and A. Mathew. Survey of CAD/feature-based process planning and NC programming techniques. Computer-Aided Engineering Journal, 8, 1, 25 -- 33, 1991.
SSS94: J. J. Shah, Y. Shen, and A. Shirur. Determination of machining volumes from extensible sets of design features. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 129 -- 157. Elsevier Science B.V., 1994.
ST89: S. Srikanth and J. U. Turner. Towards a unified representation of mechanical assemblies. Technical Report 89034, Rensselaer Design Research Center, Rensselaer Polytechnic Institute, Troy, NY, 1989.
ST91: R. Sodhi and J. U. Turner. Representing tolerance and assembly information in a feature-based design environment. In Advances in Design Automation. American Society of Mechanical Engineers, New York, NY, 1991. (Proc. 1991 Design Automation Conf., Miami, FL; ASME Publication DE-Vol. 32-1, pp. 101 -- 106. Also Technical Report 91005, Design Research Center, Rensselaer Polytechnic Institute, Troy, NY).
Sti75: G. Stiny. Pictorial and Formal Aspects of Shape and Shape Grammars. Birkhauser Verlag, 1975.
Str92: I. A. Stroud. Definition of solid modelling operations using a uniform set of elementary procedures. Technical Report GML 1992/3, Geometric Modelling Laboratory, Computer and Automation Institute, Hungarian Academy of Sciences, 1992. (Dissertaion for degree of Candidate of Technical Science).
Str93: I. A. Stroud. Modelling techniques for handling non-geometric information. In J. Rossignac, J. U. Turner, and G. Allen, editors, Second Symposium on Solid Modeling and Applications. Association for Computing Machinery, New York, NY, 1993. (Proc. ACM Symposium, Montreal, Canada, May 1993).
STZHdM89: A. C. Sanderson, J. U. Turner, H. Zhang, and L. S. Homem de Mello. Pleiades assembly sequence planning system. Technical Report 89060, Rensselaer Design Research Center, Rensselaer Polytechnic Institute, Troy, NY, 1989.
SU93: R. Sodhi and Turner J. U. Relative positioning of variational part models for design analysis. Computer Aided Design, 25, [GET DETAILS], 1993. (Also published as Technical Report No. 92005, Rensselaer Design Research Center, Rensselaer Polytechnic Institute, Troy, NY, Aug. 1992).
SULB89: K. G. Swift, M. E. Uddin, M. G. Limage, and M. S. Bielby. Production oriented design: A knowledge-based approach. Advanced Manufacturing Engineering, 1, 2, 67 -- 73, 1989.
SVC94: A. Saucier, C. Vargas, P. Court, P. Albert, and P. A. Yvars. Compared application of two knowledge modelisation methodologies on a car engine cylinder head design problem. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
SvHKTE: O. W. Salomons, F. J. A. M. van Houten, and H. J. J. Kals. Review of research in feature-based design. J. Manufacturing Systems, 12, 2, 113 -- 132, 1993 [CHECK THE DATE!].
SvSJ94: O. W. Salomons, F. van Slooten, H. G. Jonker, F. J. A. M. van Houten, and H. J. J. Kals. Interactive feature definition. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
SW93: D. A. Schenck and P. R. Wilson. Information Modeling: The EXPRESS Way. Oxford University Press, 1993.
Swi87: K. G. Swift. Knowledge-based Design for Manufacture. Kogan Page, 1987.
TA88: G. P. Turner and D. C. Anderson. An object-oriented approach to interactive feature-based design for quick turnaround manufacturing. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug 1988. American Society of Mechanical Engineers, New York, NY, 1988.
TAB94: H. K. Tönshoff, J. C. Aurich, and T. Baum. Configurable feature-based CAD/CAPP system. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
TBT94: M. Tollenaere, P. Belloy, and S. Tichkiewitch. A part description model for the preliminary design. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
TC89: J. M. Tenenbaum and M. R. Cutkosky. First-cut: a computational framework for rapid prototyping and team design. Proc. AAAI Spring Symp. on AI in Manufacturing, *** where? ***, Mar 1989, 1989.
TG93: J. U. Turner and J. Guilford. Research in automated tolerancing at RPI --- 1993. In Proc. 1993 NSF Design & Manufacturing Systems Conf., Vol 1, 709 -- 714. Society of Manufacturing Engineers, Dearborn, MI, 1993. (Conf held in Charlotte, NC, Jan. 1993. Also Technical Report 92026, Design Research Center, Rensselaer Polytechnic Institute, Troy, NY).
TH90: R. K. Tapadia and M. R. Henderson. Using a feature-based model for automatic determination of assembly handling codes. Computers & Graphics, 14, 2, ??? -- ???, 1990.
TH94: L. E. Taylor and M. R. Henderson. Validating a feature-based meta-model for mechanical products: A case study. In IFIP Valenciennes 1994. University of Valenciennes, 1994. (Proc. IFIP WG5.3 Conf. on Feature Modeling and Recognition in Advanced CAD/CAM Systems, 24 -- 26 May 1994, Valenciennes, France).
TK94: S. N. Trika and R. L. Kashyap. Geometric reasoning for extraction of manufacturing features in iso-oriented polyhedrons. IEEE Trans. on Pattern Analysis & Machine Intelligence, 16, 11, 1087 -- 1100, 1994.
TOOW91: P. Treacy, J. B. Ochs, T. M. Ozsoy, and N. Wang. Automated tolerance analysis for mechanical assemblies modelled with geometric features and relational data structure. Computer Aided Design, 23, 6, 444 -- 453, 1991.
Tru88: K. C. E. Truslove. The implications of tolerancing for computer-aided mechanical design. Computer-Aided Engineering Journal, 5, 2, 79 -- 85, 1988.
TU88: J. Tikerpuu and D. G. Ullman. General feature based frame representation for describing mechanical engineering design developed from empirical data. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug 1988. American Society of Mechanical Engineers, New York, NY, 1988.
Tur85: J. U Turner. A Vector Space Approach to the Mathematical Representation of Tolerances on Mechanical Parts. PhD thesis, Center for Interactive Computer Graphics, Rensselaer Polytechnic Institute, Troy, NY, 1985. (Published as Technical Report TR 85032).
Tur88: J. U. Turner. New methods for tolerance analysdis in solid modeling. Unknown IEEE jornal or conference, 1988.
Tur90: J. U. Turner. Relative positioning of parts in assemblies using mathematical programming. Computer Aided Design, 22, 7, 394 -- 400, 1990.
Tur91a: J. U. Turner. GEOS design overview. Technical Report 91032, Rensselaer Design Research Center, Rensselaer Polytechnic Institute, Troy, NY, 1991.
Tur91b: J. U. Turner. GEOS overview. Technical Report 91031, Rensselaer Design Research Center, Rensselaer Polytechnic Institute, Troy, NY, 1991.
TW87: J. U. Turner and M. J. Wozny. Tolerances in computer aided geometric design. The Visual Computer, 3, 214 -- 216, 1987.
TW88: J. U. Turner and M. J. Wozny. A mathematical theory of tolerances. In M. J. Wozny, H. W. McLaughlin, and J. Encarnaçao, editors, Geometric Modeling for CAD Applications. North-Holland Publishing Co., 1988. (Proc. IFIP WG5.2 Working Conf., Rensselaerville, NY, May 1986).
TW91a: K. Tang and T. C. Woo. Algorithmic aspects of alternating sum of volumes, Part 1: Data structure and difference operation. Computer Aided Design, 23, 5, 357 -- 368, 1991.
TW91b: K. Tang and T. C. Woo. Algorithmic aspects of alternating sum of volumes, Part 2: Non-convergence and its remedy. Computer Aided Design, 23, 6, ??? -- ???, 1991.
U91: R. Uzsoy et al. An experimental expert system for process planning of sheet metal parts. Computers & Industrial Engineering, 20, 1, 59 -- 69, 1991.
UA92: V. Unruh and D. C. Anderson. Feature-based modeling for automatic mesh generation. Engineering with Computers, 8, 1, 1 -- 12, 1992.
UDS88: S. Ullman, T. G. Dietterich, and L. Stauffer. A model of the mechanical design process based on empirical data. Artificial Intelligence for Engineering, Design, Analysis and Manufacturing, 2, 1, 35 -- 52, 1988.
UR88: M. B. Unger and S. R. Ray. Feature-based process planning in the AMRF. In Proc. ASME Computers in Engineering Conf., San Francisco, July/Aug. 1988. American Society of Mechanical Engineers, New York, NY, 1988.
US88: K. T. Ulrich and W. T. Seering. Function sharing in mechanical design. Proc. AAAI 7th National Conf. on Artificial Intelligence, St. Paul, MN, Aug. 1988, 1988.
US90: K. T. Ulrich and W. T. Seering. Function sharing in mechanical design. Design Studies, 11, 4, 223 -- 234, 1990.
V89: K. R. Vernuri et al. Topology-based geometry representation to support geometric reasoning. IEEE Trans. Systems, Man & Cybernetics, 19, 2, 175 -- 187, 1989.
Ván: J. Váncza. Features and the principle of locality in process planning. Preprint, ????
Van90: J. H. Vandenbrande. Automatic Recognition of Machinable Features in Solid Models. PhD thesis, Electrical Engineering Dept., University of Rochester, Rochester, NY, 1990.
VDI87: VDI. VDI Systematic Approach to the Design of Technical Systems and Products. Beuth Verlag, 1987. (VDI Guidelines 2221).
vE88: A. H. van't Erve. Computer Aided Process Planning for Part Manufacturing: An Expert System Approach. PhD thesis, University of Twente, Enschede, The Netherlands, 1988.
vE89: M. J. G. M. van Emmerik. Graphical interaction on procedural object descriptions. In W. Strasser and H.-P. Seidel, editors, Theory and Practice of Geometric Modeling. Springer-Verlag, 1989. (Proc. Intl. Conf. in Blaubeuren, Germany, Oct 1988).
vE90: M. J. G. M. van Emmerik. Interactive Design of Parameterized 3D Models by Direct Manipulation. PhD thesis, Delft University Press, 1990.
vEJ89: M. J. G. M. van Emmerik and F. W. Jansen. User interface for feature modelling. In F. Kimura and A. Rolstadås, editors, Computer Applications in Production and Engineering. North-Holland Publishing Co., 1989.
vEK86: A. H. van't Erve and H. J. J. Kals. XPLANE: A knowledge-base driven process planning expert system. In J. A. McGeough, editor, Computer Aided Production Engineering. Mechanical Engineering Publications Ltd., Bury St. Edmunds, England, 1986. (Proc. International Conf., Edinburgh, April 1986).
VGJ90: T. Várady, B. Gaál, and G. E. M. Jared. Notes on identifying features in solid modelling. In F.-L. Krause and H. Jansen, editors, Advanced Geometric Modelling for Engineering Applications. North-Holland Publishing Co., 1990. (Proc. GI/IFIP International Symposium, Berlin, Germany, Nov. 1989).
vH91: F. J. A. M. van Houten. PART: A Computer Aided Process Planning System. PhD thesis, Laboratory of Production Engineering, University of Twente, Enschede, The Netherlands, 1991.
vHvEK89: F. J. A. M. van Houten, A. H. van't Erve, and H. J. J. Kals. PART: A feature based computer aided process planning system. In Proc. 21st CIRP International Seminar on Manufacturing Systems, June 1989, Stockholm, Sweden, 1989.
VK92: R. Vujosevic and A. Kusiak. Selection of machinable volumes: an object-oriented approach. Expert Systems with Applications, 4, 273 -- 283, 1992.
Voe93: H. B. Voelcker. A current perspective on tolerancing and metrology. ASME Manufacturing Review, 6, 4, 258 -- 268, 1993.
VR90a: J. H. Vandenbrande and A. A. G. Requicha. Automatic recognition of interacting form features. Presented at IFIP WG5.2 Workshop on Geometric Modelling, Rensselaerville, N.Y., June 1990, 1990. (DID THEY PUT IN A PAPER?).
VR90b: J. H. Vandenbrande and A. A. G. Requicha. Spatial reasoning for automatic recognition of interacting form features. In G. I. Kinzel et al., editors, Computers in Engineering, pages 251 -- 256. American Society of Mechanical Engineers, New York, NY, 1990. (Proc. 1990 ASME Computers in Engineering Conf., Boston, MA).
vR90c: M. von Rimscha. Feature modelling and assembly modelling --- a unified approach. In F.-L. Krause and H. Jansen, editors, Advanced Geometric Modelling for Engineering Applications. North-Holland Publishing Co., 1990. (Proc. GI/IFIP International Symposium, Berlin, Germany, Nov. 1989).
VR94: J. H. Vandenbrande and A. A. G. Requicha. Geometric computation for the recognition of spatially interacting machining features. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 83 -- 106. Elsevier Science B.V., 1994.
VS88: D. L. Vickers and K. A. Swanson. A form features-centred architecture for product definition exchange. Proc. SME Autofact Conf., Chicago, IL, 30 Oct -- 2 Nov 1988, 1988.
VZDS85: M. Vaghul, G. E. Zinsmeister, J. R. Dixon, and M. K. Simmons. Expert systems in a CAD environment: Injection molding part design as an example. In Proc. 1985 Conf. on Computers in Mechanical Engineering, Boston, MA, Aug. 1985. American Society of Mechanical Engineers, New York, NY, 1985.
W90: A. Westerberg et al. Applications of AI in design research at Carnegie Mellon University's EDRC. Artificial Intelligence in Engineering, 5, 2, 110 -- 124, 1990.
Wal: K. Walker. Solid modelling and feature-based systems in manufacturing. Preprint, Engineering Computer Services Ltd., Lichfield, England, ????
Wan87: H. P. Wang. A knowledge-based computer aided process planning system. In D. Sriram and R. A Adey, editors, Knowledge-based Expert Systems in Engineering Planning and Design. Computational Mechanics Publications, 1987.
Wan91: M.-T. Wang. An object-oriented feature-based CAD-CAPP-CAM integration framework. In Advances in Design Automation, Vol. 1. American Society of Mechanical Engineers, New York, NY, 1991. (ASME Publication DE-Vol. 32-1, pp. 109 -- 116).
WB91: B. Wördenweber and W. Brandenburg. Feature for lights. Preprint of paper delivered in Minisymposium on Vehicle Lighting, SIAM Conf. on Computer Aided Geometric Design, Tempe, AZ, Nov. 1991, 1991.
WC87: H. P. Wang and H. Chang. Automatic classification and coding based on extracted surface features in a CAD database. Int. J. Advanced Manufacturing Technology, 2, 1, 25 -- 35, 1987.
WC91: J. D. Wolter and P. Chandrasekharan. Knowledge representation for functional design of mechanical assemblies. In Proc. 1991 SME/NSF Design & Manufacturing Conf., Austin, TX, Jan 1991. Society of Manufacturing Engineers, Dearborn, MI, 1991.
WD90: R. V. Welch and J. R. Dixon. Configuration design by iterative redesign: Sheet metal bracket design as an example. J. of Engineering Design, 1, 3, 221 -- 237, 1990.
Wie91: L. S. Wierda. Linking design, process planning and cost information by feature-based modelling. J. Engineering Design, 2, 1, 3 -- 19, 1991.
Wil88: P. R. Wilson. Multiple representations of solid models. In M. J. Wozny, H. W. McLaughlin, and J. Encarnaçao, editors, Geometric Modeling for CAD Applications. North-Holland Publishing Co., 1988. (Proc. IFIP WG5.2 Working Conf., Rensselaerville, NY, May 1986).
Win91: L. Wingård. Introducing form features in product models: A step towards CADCAM with engineering terminology. Licentiate thesis, Dept. of Manufacturing Systems, Royal Institute of Technology, Stockholm, Sweden, 1991.
WK93: D. L. Waco and Y. S. Kim. Geometric reasoning for machining features using convex decomposition. In J. Rossignac, J. U. Turner, and G. Allen, editors, Second Symposium on Solid Modeling and Applications. Association for Computing Machinery, New York, NY, 1993. (Proc. ACM Symposium, Montreal, Canada, May 1993).
WL87: H. P. Wang and A. L. Liu. Automated generation of NC part programs for turned parts based on 2D drawing files. Int. J. Advanced Manufacturing Technology, 2, 3, 23 -- 35, 1987.
WL90: R. G. Wilhelm and S. C. Lu. Tolerance primitives for composition and synthesis. Proc. 18th SME North American Manufacturing Research Conf., University Park, PA, May 1990, 1990.
WO90: N. Wang and T. M. Ozsoy. Representation of assemblies for automatic tolerance chain generation. Engineering with Computers, 6, 121 -- 126, 1990.
WO91: N. Wang and T. M. Ozsoy. A scheme to represent features, dimensions and tolerances in geometric modeling. J. Manufacturing System, 10, 3, 233 -- 240, 1991.
Wol89: J. D. Wolter. On the automatic generation of assembly plans. Proc. IEEE Intl. Conf. on Robotics & Automation, Scottsdale, AZ, 14 -- 19 May 1989, 1989.
Woo75: T. C. Woo. Computer Understanding of Designs. PhD thesis, University of Illinois, Urbana-Champaign, 1975.
Woo77: T. C. Woo. Computer aided recognition of volumetric designs. In D. McPherson, editor, Advances in Computer-Aided Manufacturing. North-Holland Publishing Co., 1977. (Proc. PROLAMAT 76 Conf., Stirling, Scotland, June 1976).
Woo82: T. C. Woo. Feature extraction by volume decomposition. In CAD/CAM Technology in Mechanical Engineering. MIT Press, 1982. (Proc. Conf. at Massachusetts Institute of Technology, March 1982).
Woo84: T. C. Woo. Interfacing solid modeling to CAD and CAM: Data structures and algorithms for decomposing a solid. Computer, (DEC 1984 ?????), 44 -- 49, 1984.
Woo88a: J. R. Woodwark. Shape models in computer integrated manufacture --- A review. Computer Aided Design, 5, 3, 103 -- 113, 1988.
Woo88b: J. R. Woodwark. Some speculations on feature recognition. Computer Aided Design, 20, 4, 189 -- 196, 1988.
WP88: P. R. Wilson and M. J. Pratt. A taxonomy of features for solid modeling. In M. J. Wozny, H. W. McLaughlin, and J. Encarnaçao, editors, Geometric Modeling for CAD Applications, pages 125 -- 136. North-Holland Publishing Co., 1988. (Proc. IFIP WG5.2 Working Conf., Rensselaerville, NY, May 1986).
WPP94: M. J. Wozny, M. J. Pratt, and C. Poli. Topics in feature-based design and manufacturing. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 481 -- 510. Elsevier Science B.V., 1994.
WT89: R.-F. Wang and J. U. Turner. Recent research in feature-based design. Technical Report 89020, Rensselaer Design Research Center, Rensselaer Polytechnic Institute, Troy, NY, 1989.
WTD91: M. J. Wozny, J. U. Turner, J. R. Dixon, C. Poli, and R. Graves. A unified representation to support evaluation of designs for manufacturability: Phase I. In Proc. 1991 SME/NSF Conf. on Design & Manufacturing Systems, Austin, TX, Jan. 1991. Society of Manufacturing Engineers, Dearborn, MI, 1991. (Also Technical Report 90044, Design Research Center, Rensselaer Polytechnic Institute, Troy, NY).
WTG92: M. J. Wozny, J. U. Turner, R. Graves, X. Dong, J. R. Dixon, C. Poli, D. W. Rosen, and A. Mahajan, P. V.and Fathailall. A unified representation to support evaluation of designs for manufacturability: Phase II. In Proc. 1992 SME/NSF Conf. on Engineering Design & Manufacturing Systems, Atlanta, GA, Jan. 1992. Society of Manufacturing Engineers, Dearborn, MI, 1992. (Also Technical Report 91027, Design Research Center, Rensselaer Polytechnic Institute, Troy, NY).
WTG93: M. J. Wozny, J. U. Turner, R. Graves, X. Dong, R. Sodhi, J. R. Dixon, C. Poli, D. W. Rosen, P. V. Mahajan, and A. Fathailall. A unified representation to support evaluation of designs for manufacturability: Phase III. In Proc. 1993 SME/NSF Conf. on Engineering Design & Manufacturing Systems, Charlotte, NC, Jan. 1993. Society of Manufacturing Engineers, Dearborn, MI, 1993. (Also Technical Report 92035, Design Research Center, Rensselaer Polytechnic Institute, Troy, NY).
WW91: J. Wang and W. R. Wilson. A frame-based representation for the design of sheet metal parts. Proc. 19th SME North American Manufacturing Research Conf., Rolla, MO, May 1991, 1991.
YF79: K. C. You and K. S. Fu. A syntactic approach to shape recognition using attributed grammars. IEEE Trans. on Systems, Man and Cybernetics, SMC9, 6, 334 -- 345, 1979.
YFK84: H. Yoshimura, K. Fujimura, and T. Kunii. Top-down construction of 3D mechanical object shapes from engineering drawings. Computer, ????, 32 -- 39, 1984.
YHD94: D. Yip-Hoi and D. Dutta. An introduction to parallel machine tools and related CAPP issues. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 261 -- 285. Elsevier Science B.V., 1994.
Yin88: M. A. Yinger. Fundamental concepts of product definition analysis. Proc. Conf. on Managing Engineering Data: Engineering Issues, San Francisco, Aug 1988, 1988.
YJW91: N. J. Yannoulakis, S. B. Joshi, and R. A. Wysk. A manufacturability evaluation system. In Proc. 1991 Design Theory & Methodology Conf. American Society of Mechanical Engineers, New York, NY, 1991. (ASME Publication DE-31, pp. 217 -- 226).
YM94: Y. Yue and J. L. Murray. Validation, workpiece selection and clamping of complex 2.5D components. In J. J. Shah, M. Mäntylä, and D. S. Nau, editors, Advances in Feature Based Manufacturing, pages 185 -- 213. Elsevier Science B.V., 1994.
You91: D. You. Merging functional form features into GT codes to enhance CAD/CAM integration. Computer Aided Drafting, Design & Manufacturing, 1, 1, 73 -- 82, 1991.
YT91: M. Yoshimura and A. Takeuchi. Integrated optimization in computer aided design and manufacturing of machine products based on shape descriptions of contact surfaces. In Advances in Design Automation. American Society of Mechanical Engineers, New York, NY, 1991. (ASME Publication DE-32, Vol. 2, pp. 353 -- 360).
ZFTF91: M. K. Zamanian, S. J. Fenves, C. R. Thewalt, and S. Finger. A feature-based approach to structural design. Engineering with Computers, 7, 1, 1 -- 9, 1991.
ZLS90: E. Zussman, E. Lenz, and M. Shpitalni. An approach to the automatic assembly planning problem. Ann. CIRP, 39, 1, 33 -- 36, 1990.
ZSL91: E. Zussman, M. Shoham, and E. Lenz. A kinematic approach to automatic assembly planning analysis. In A. Bagchi and J. J. Beaman, editors, Intelligent Design and Manufacturing for Prototyping. American Society of Mechanical Engineers, New York, NY, 1991. (Proc. 1991 ASME Winter Annual Meeting, Atlanta, GA, Dec. 1991; Publication PED-Vol. 50).
ZWD89: K. F. Zhang, A. J. Wright, and B. J. Davies. A feature recognition knowledge base for process planning of rotational mechanical components. Int. J. Advanced Manufacturing Technology, 4, 1, 13 -- 25, 1989.

William C. Regli
Mon Jul 17 14:49:46 EDT 1995