PUBLICATIONS by AUTHOR

PLEASE NOTE: The Publications System provided by the Manufacturing Systems Integration Division (MSID) has moved to: http://www.mel.nist.gov/msidlibrary/publications.html. The pages below are maintained for archival purposes only.

| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |

A

Algeo, Mary Beth

Edward Barkmeyer and Mary Beth Algeo: "Enterprise Resource Planning Systems in Manufacturing," Handbook for Industrial Engineering, August, 2000.

Mary Beth Algeo, James Fowler and Kevin Jurrens: "Computerized Representation of Manufacturing Resources: Validation and Standardization," Proceedings of 1996 Japan-USA Symposium on Flexible Automation, ASME, Boston, MA, July 8-10, 1996.

James Fowler, Mary Beth Algeo and Kevin Jurrens: "Computerized Representations of Manufacturing Resources: Statement of Need and a Proposed Solution," 1996 Japan-USA Symposium on Flexible Automation, May, 1996.

Kevin Jurrens, Mary Beth Algeo and James Fowler: Beyond Product Design Data: Data Standards for Manufacturing Resources, to be published as Chapter 5 in Edited by Prof. Jian Dong, published by Chapman and Hall, Rapid Response Manufacturing: Contemporary methodologies, tools, and technniques, 1996, Dr. Jian Dong (editor), Chapman and Hall.

Kevin Jurrens, James Fowler and Mary Beth Algeo: "Modeling of Manufacturing Resource Information, Requirements Specification," NISTIR 5707, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Mary Beth Algeo: "A State-of-the-Art Survey of Methodologies for Representing Manufacturing Process," NISTIR 5391, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Mary Beth Algeo, Shaw Feng and Steven Ray: "A State-of-the-Art Survey on Product Design and Process Planning Integration Mechanisms," NISTIR 5548, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Mary Beth Algeo and Cathleen Diaz: "A Process for Selecting Standard Reference Algorithms for Evaluating Coordinate Measurement Software," NISTIR 5374, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Mary Beth Algeo and Ted Hopp: "Form Error Models of the NIST Algorithm Testing System," NISTIR 4740, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Angster, Scott

Kevin Lyons, Scott Angster and Sankar Jayaram: Chapter 6: Virtual Environments for Design and Manufacture, Concurrent Engineering - The Agenda for Success, Res Studies Press Ltd., 1997.

B

Barkmeyer, Edward

Edward Barkmeyer and Mary Beth Algeo: "Enterprise Resource Planning Systems in Manufacturing," Handbook for Industrial Engineering, August, 2000.

C. Parks, Edward Barkmeyer and James Nell: "Internet Commerce for Manufacturing Activity Model," NISTIR 6516, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

David Flater, Edward Barkmeyer and Evan Wallace: "Towards Unambiguous Specifications: Five Alternative Job Control Models for An Object-Oriented, Hierarchical Shop Control System," In Proceedings of the 1999 ASME Design Engineering Technical Conferences, Las Vegas, Nevada, CD-ROM file name Pdfs/Cie/9012.pdf., ASME Technical Publishing, September 1999..

Edward Barkmeyer, Peter Denno, Shaw Feng, Evan Wallace and Albert Jones: "NIST Response to MES Request for Information," NISTIR 6397, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

David Flater, Edward Barkmeyer and Evan Wallace: "State Models for Jobs and Job Supervisors," NISTIR 6037, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Edward Barkmeyer, Neil Christopher, Shaw Feng, James Fowler, Simon Frechette, Albert Jones, Kevin Jurrens, Charles McLean, Mike Pratt, Harry A. Scott, M. K. Senehi, Ram Sriram and Evan Wallace: "SIMA Reference Architecture Part I: Activity Models," NISTIR 5939, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Edward Barkmeyer, Ted Hopp, Mike Pratt and Gaylen Rinaudot: "Background Study: Requisite Elements, Rationale, and Technology Overview for the Systems Integration for Manufacturing Applications (SIMA) Program," NISTIR 5662, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Sara Wallace, M. K. Senehi, Edward Barkmeyer, Steven Ray and Evan Wallace: "Manufacturing Systems Integration Control Entity Interface Specification," NISTIR 5272, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Edward Barkmeyer, James Fowler and S. Magleby: "A Conceptual Architecture for Mechanical Parts Production System Based on STEP," NISTIR 4699, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

M. K. Senehi, Edward Barkmeyer, Steven Ray and Evan Wallace: "Manufacturing Systems Integration Initial Architecture Document," NISTIR 4682, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

M. K. Senehi, Sara Wallace, Evan Wallace, Steven Ray and Edward Barkmeyer: "Manufacturing Systems Integration Control Entity Interface Document," NISTIR 4626, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

G. Thomas, G. Thompson, C. Chung, Edward Barkmeyer, F. Carter, M. Templeton, S. Fox and B. Hartman: "Heterogeneous Distributed Database Systems for Production Use," ACM Computing Surveys, September, 1990.

Edward Barkmeyer and Jane Lo: "Experience with IMDAS in the Automated Manufacturing Research Facility," NISTIR 4132, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Edward Barkmeyer: "Some Interactions of Information and Control in Integrated Automation Systems," Advanced Information Technologies for Industrial Material Flow Systems, NATO SAI Series, 1989.

Siefried Rybczynski, Edward Barkmeyer, Evan Wallace, M. Strawbridge, Don Libes and C. Young: "AMRF Network Communications," NBSIR 3816, National Bureau of Standards, Gaithersburg, MD, 1988.

Edward Barkmeyer: "Distributed Data Interfaces--the Lessons of IMDAS," Proceedings of CIM Databases '88 Conference, March, 1988.

Cita Furlani, Don Libes, Edward Barkmeyer and Mary Mitchell: "The Distributed Data System of the Automated Manufacturing Research Facility of the National Bureau of Standards," Proceedings of COMPCON SPRING `88, March, 1988.

Don Libes and Edward Barkmeyer: "The Integrated Manufacturing Data Administration System (IMDAS) - An Overview," International Journal of Computer Integrated Manufacturing, 1988.

Cita Furlani, Don Libes, Edward Barkmeyer and Mary Mitchell: "Distributed Databases on the Factory Floor," Proceedings of the First International Symposium on Computerization and Networking of Materials Property Databases, November, 1987.

V. Krishnamurthy, Stanley Su, H. Lam, Mary Mitchell and Edward Barkmeyer: "A Distributed Database Architecture for an Integrated Manufacturing Facility," Proceedings of the Conference on Data and Knowledge Systems for Engineering and Manufacturing,, October, 1987.

Edward Barkmeyer, Mary Mitchell, K. Mikkilineni, Stanley Su and H. Lam: "An Architecture for Distributed Data Management in Computer Integrated Manufacturing," NBS Internal Report 3312, National Bureau of Standards, Gaithersburg, MD, 1986.

J. Albus, A. Barbera, M. Fitzgerald, E. Kent, Charles McLean, H. McCain, Howard Bloom, L. Haynes, Cita Furlani, Edward Barkmeyer, Mary Mitchell, H. Scott, D. Blomquist and R. Kilmer: "A Control System for an Automated Manufacturing Research Facility," Society of Manufacturing Engineering, Robots 8, June, 1984.

Mary Mitchell and Edward Barkmeyer: "Data Distribution in the NBS Automated Manufacturing Research Facility," Proceedings of the IPAD II Conference, April, 1984.

Charles McLean, Mary Mitchell and Edward Barkmeyer: "A Computer Architecture for Small Batch Manufacturing," IEEE Spectrum, 1983.

Barnard Feeney, Allison

Allison Barnard Feeney and David M. Price: "A Modular Architecture for STEP," Proceedings of World Automation Congress 2000, December, 1999.

Allison Barnard Feeney, M. Gilbert and Y. Yang: "Guidelines for AIM Development," NISTIR 5830, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Allison Barnard Feeney and D. Craig: "Guidelines for the Development of Mapping Tables," NISTIR 5715, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Allison Barnard Feeney, M. Gilbert and Y. Yang: "Guidelines for AIM Development," NISTIR 5716, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

David Sauder, Mary Mitchell and Allison Barnard Feeney: "Challenges to the NII: The Barriers to Product Data Sharing," NISTIR 5498, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Steve Clark and Allison Barnard Feeney: "APDE Demonstration System Architecture," NISTIR 5318, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Steve Clark, Allison Barnard Feeney and James Fowler: "Specifications for an Application Protocol Development Environment," NISTIR 5248, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

K.C. Morris, Mary Mitchell and Allison Barnard Feeney: "Validating STEP Application Models at the National PDES Testbed," NISTIR 5196, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Allison Barnard Feeney: "User's Guide to the On-Line Bibliographic Reference System for the NIST Process Planning Testbed," NISTIR 4891, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Tom Kramer, M. Palmer and Allison Barnard Feeney: "Issues and Recommendations for a STEP Application Protocol Framework," NISTIR 4755, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Allison Barnard Feeney and Peter Brown: "Use of Solid Modeling in Design of M3 Components," NISTIR 4701, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Allison Barnard Feeney: "Engineering Design Laboratory Guide," NISTIR 4519, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Barnard, Allison

Allison Barnard, Steve Clark and James Fowler: "Requirements for an Application Protocol Development Environment," NISTIR 5197, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Steven Ray and Allison Barnard: "A National Testbed for Process Planning Research," NISTIR 5169, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Allison Barnard: "AMRF Part Model Extensions," NISTIR 4189, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Bloom, Howard

Howard Bloom and Neil Christopher: "A Framework for Distributed and Virtual Discrete Part Manufacturing," Proceedings of the CALS Expo Conference, Long Beach, CA, October, 1996.

Howard Bloom, Sandra Ford and Mary Mitchell: "Standard for the Exchange of Product Model Data (STEP): Ready for Industry Implementation," Manufacturing Review Journal, Vol. 7, No. 4, December, 1994.

Howard Bloom: "Technical Program Description: Systems Integration for Manufacturing (SIMA)," NISTIR 5476, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Howard Bloom: "Formulation for Position on U.S. Standards Role in Enterprise Integration," NISTIR 5484, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Howard Bloom: "Strategic Plan for the Factory Automation Systems Division," NISTIR 5148, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Howard Bloom: "STEP -- Standard for the Exchange of Product Model Data," The CALS Journal, June, 1992.

Howard Bloom and Larry Masters: "The Technical Program of the Factory Automation Systems Division 1992," NISTIR 4856, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Howard Bloom: "Status Report of the Second Quarter, FY92 (January 1 through March 1992)," NISTIR 4914, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Howard Bloom: "Status Report for First Quarter, FY92 (1 October Through 31 December 1991)," NISTIR 4787, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Gary Carver and Howard Bloom: "Multi-Enterprise Concurrent Engineering Through International Standards," NISTIR 4708, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Howard Bloom and Gary Carver: "Technical Program of the Factory Automation Systems Division 1991," NISTIR 4584, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Gary Carver and Howard Bloom: "Concurrent Engineering Through Product Data Standards," NISTIR 4573, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Howard Bloom: "Software and Computer Integrated Manufacturing," NISTIR 4468, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Howard Bloom: "PDES: The Key to Quality Products," Proceedings of the Total Quality Management Symposium, November, 1989.

Howard Bloom: "The Role of the National Institute of Standards and Technology as it Relates to the Implementation of PDES," Proceedings of `PDES: The Enterprise Data Standard' Conference, May, 1989.

Howard Bloom: "The Role of the National Institute of Standards and Technology as it Relates to Product Data Driven Engineering," NISTIR 4078, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Howard Bloom, Cita Furlani, Mary Mitchell and Joan Tyler: "Information Resource Dictionary System: An Integration and Mechanism for Product Data Exchange Specification," NISTIR 3862, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

Howard Bloom and N. Kuchar: "A National Forum on the Future of Automated Materials Processing in U.S. Industry--The Role of Process Models, Artificial Intelligence and Computer Integration," NBS Internal Report 3544, National Bureau of Standards, Gaithersburg, MD, 1987.

Howard Bloom, Cita Furlani and A. Barbera: "Emulation as a Design Tool in the Development of Real-Time Control Systems," Proceedings of the Winter Simulation Conference, November, 1984.

J. Albus, A. Barbera, M. Fitzgerald, E. Kent, Charles McLean, H. McCain, Howard Bloom, L. Haynes, Cita Furlani, Edward Barkmeyer, Mary Mitchell, H. Scott, D. Blomquist and R. Kilmer: "A Control System for an Automated Manufacturing Research Facility," Society of Manufacturing Engineering, Robots 8, June, 1984.

Howard Bloom and Cita Furlani: "Emulation as a Design Tool in Real-Time Control Systems," Proceedings of the IASTED Conference on Simulation and Modeling, June, 1984.

Cita Furlani, E. Kent, Howard Bloom and Charles McLean: "The Automated Manufacturing Research Facility of the National Bureau of Standards," Proceedings of the Summer Computer Simulation Conference, July, 1983.

J. Albus, A. Barbera, Howard Bloom, M. Fitzgerald, E. Kent and Charles McLean: "Hierarchical Control for Robots in an Automated Factory," Proceedings of the 13th International Symposium on Industrial Robots, Robots 7, April, 1983.

Howard Bloom and Charles McLean: "Standardization Suggested by the AMRF--A Research Testbed of the Factory of the Future," Proceedings of the ASTM Symposium on Automated Manufacturing, April, 1983.

Howard Bloom and Carl Wenger: "An Automated Documentation System for a Large-scale Manufacturing Engineering Research Project," Proceedings of the ACM SIGDOC 2nd International Conference on Systems Documentation, April, 1983.

Howard Bloom, Charles McLean, Cita Furlani, T. Johnson, S. Milligan and T. Fortman: "Simulation of a Modular Hierarchical Feedback System," Proceedings of the 21st IEEE Conference on Decision and Control, December, 1982.

Charles McLean, Howard Bloom and Ted Hopp: "The Virtual Manufacturing Cell," Proceedings of the IFAC/IFIP Conference on Information Control Problems in Manufacturing Technology, October, 1982.

Bochenek, Christophe

Simon Szykman, Christophe Bochenek, J. W. Racz and Ram Sriram: "Design Repositories: Next-Generation Engineering Design Databases," IEEE Intelligent Systems and Their Applications, January, 2000.

Simon Szykman, Ram Sriram, Christophe Bochenek and Janusz Racz: "The NIST Design Repository Project," Advances in Soft Computing - Engineering Design and Manufacturing, Roy, R., T. Furuhashi and P. K. Chawdhry (eds.), Springer-Verlag, London, 1999., July, 1998, pp.5-19.

Bodarky, Scott

Scott Bodarky: "A User's Guide to Configuration Management and the Revision Control System for Testbed Users," NISTIR 4646, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Breese, Newton

Newton Breese, Micheal McLay and G. Silvernale: "Validation Testing Laboratory User's Guide," NISTIR 4683, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Brown, Peter

Kevin Lyons and Peter Brown: "Design Engineering Research at NIST," NISTIR 5464, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Allison Barnard Feeney and Peter Brown: "Use of Solid Modeling in Design of M3 Components," NISTIR 4701, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Peter Brown and Steven Ray: "NBS AMRF Process Planning System--System Architecture," NISTIR 3828, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

Charles McLean and Peter Brown: "AMRF Process Planning System," Manufacturing Engineering Magazine, CIM Technology Supplement, August, 1987.

Charles McLean and Peter Brown: "The Architecture of the NBS Factory Automation Research Testbed," Proceedings of the 10th IPAC World Congress, July, 1987.

Peter Brown and Steven Ray: "Research Issues in Process Planning at the National Bureau of Standards," Proceedings of the 19th CIRP International Seminar on Manufacturing Systems, 1987.

Peter Brown and Charles McLean: "Interactive Process Planning in the AMRF," Proceedings of the Symposium on Knowledge-Based Expert Systems for Manufacturing at ASME Winter Annual Meeting, December, 1986.

Browning, M.

M. Browning: "A Modular Architecture for a Process Planning Systems," Proceedings of the Joint Conference on Artificial Intelligence (IICAI), August, 1989.

C

Carr, Peter

K.C. Morris, Micheal McLay and Peter Carr: "Validation Testing System Requirements," NISTIR 4676, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Carver, Gary

Lisa Carnahan, Gary Carver, Martha Gray, Mike Hogan, Ted Hopp, Jeffrey Horlick, Gordon Lyon and Elena Messina: "Metrology for Information Technology (IT)," NISTIR 6025, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Gary Carver and Howard Bloom: "Multi-Enterprise Concurrent Engineering Through International Standards," NISTIR 4708, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Howard Bloom and Gary Carver: "Technical Program of the Factory Automation Systems Division 1991," NISTIR 4584, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Gary Carver and Howard Bloom: "Concurrent Engineering Through Product Data Standards," NISTIR 4573, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Gary Carver and Fahey, Mary Lou: "Information Systems for Manufacturing Publications from the Factory Automation Systems Division," LP 101, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Catron, Brian

Brian Catron and Steven Ray: "ALPS: A Language for Process Specification," The Journal of Computer Integrated Manufacturing, 1991.

Brian Catron: "A Framework for Semiconductor Manufacturing," Proceedings of the 3rd DARPASCR CIM-CI Workshop, Stanford, CA, August 1988.

Brian Catron and Bruce Thomas: "Generic Manufacturing Controllers," Proceedings of the IEEE Conference on Intelligent Control, August, 1988.

Chase, Scott

Scott Chase: "Supporting Emergence in Geographic Information Systems," Environment and Planning B: Planning and Design, forthcoming.

Scott Chase: "Logic Based Design Modeling with Shape Algebras," Automation in Construction, 6:4, October, 1997, PP.311-322.

Scott Chase: "Emergence, Creativity, and Computational Tractability in Shape Grammers," Proceedings of CHI '97, Atlanta, GA, March 23, 1997.

Scott Chase: "Design Modeling With Shape Algebras and Formal Logic," Proceedings of ACADIA (Association for Computer-Aided Design in Architecture) '96 Conference, Tucson, AZ, October, 1996.

Scott Chase: "Using Logic to Specify Shapes and Spatial Relations in Design Grammars," Artificial Intelligence in Design '96 Workshop: Grammatical Design, Stanford University, June, 1996.

Scott Chase: "Representing Designs With Logic Formulations of Spatial Relations," Artificial Intelligence in Design 96 Workshop: Visual Representation, Reasoning and Interaction in Design, Stanford University, June, 1996.

Scott Chase: "Modeling Spatial Reasoning Systems With Shape Algebras and Formal Logic," AIEDAM Journal (Artificial Intelligence for Engineering Design Analysis and Manufacturing), special issue on Geometric Representation and Reasoning in Design, 1996.

Chen, C.

Charles McLean, Swee Leong and C. Chen: "Issues of Manufacturing Engineering Data Validation in Concurrent Engineering Environment," Proceedings of the IFIP WG 5.7 on Production Management Systems, Seattle, WA, September, 1995.

Christopher, Neil

Neil Christopher and James Nell: "Standards Classification Strategy and Methodology," NISTIR 6409, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

Neil Christopher and James Nell: "Criteria Analysis," NISTIR 6408, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

Edward Barkmeyer, Neil Christopher, Shaw Feng, James Fowler, Simon Frechette, Albert Jones, Kevin Jurrens, Charles McLean, Mike Pratt, Harry A. Scott, M. K. Senehi, Ram Sriram and Evan Wallace: "SIMA Reference Architecture Part I: Activity Models," NISTIR 5939, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Neil Christopher and Selden Stewart: "NAMT Fremework for Discrete Parts Manufacturing: Industrial Review Roundtable '96," NISTIR 5924, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Neil Christopher: "NAMT Framework for Discrete Parts Manufacturing: Experience Report," Proceedings of Plug and Play Software for Agile Manufacturing, Boston, MA, November 18-19, 1996.

Howard Bloom and Neil Christopher: "A Framework for Distributed and Virtual Discrete Part Manufacturing," Proceedings of the CALS Expo Conference, Long Beach, CA, October, 1996.

Clark, Steve

Don Libes and Steve Clark: "An Object Oriented Tcl-Tk Binding for Interpreted Control of the NIST Express Toolkit in the NIST STEP Application Protocol Development Environment," Proceedings of the EUG'95 (Express User's Group) Conference Grenoble, France, October, 1995.

Steve Clark and Allison Barnard Feeney: "APDE Demonstration System Architecture," NISTIR 5318, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Steve Clark, Allison Barnard Feeney and James Fowler: "Specifications for an Application Protocol Development Environment," NISTIR 5248, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Allison Barnard, Steve Clark and James Fowler: "Requirements for an Application Protocol Development Environment," NISTIR 5197, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Steve Clark: "Transformr: A Prototype STEP Exchange File Migration Tool," NISTIR 4944, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Don Libes and Steve Clark: "The NIST EXPRESS Toolkit - Lessons Learned," EXPRESS Users Group Conference, October, 1992.

Steve Clark and Don Libes: "The NIST PDES Toolkit: Technical Fundamentals," NISTIR 4815, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Steve Clark and Don Libes: "FED-X: The NIST Express Translator," NISTIR 4822, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Steve Clark and Don Libes: "NIST Express Working Form Programmer's Reference," NISTIR 4814, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

R. Kohout and Steve Clark: "Considerations for the Transformation of STEP Physical Files," NISTIR 4793, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Kenneth Manheimer, B. Warsaw, Steve Clark and W. Rowe: "The Depot: A Framework for Sharing Software Installation Across Organizational & UNIX Platform Boundaries," Proceedings of the Fourth USENIX Large Installation Systems Administration (LISA), September, 1990.

Steve Clark: "QDES User's Guide," NISTIR 4361, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Steve Clark: "NIST STEP Working Form Programmer's Reference," NISTIR 4353, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Steve Clark: "Fed-X: The NIST Express Translator," NISTIR 4371, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Steve Clark: "The NIST Working Form for STEP," NISTIR 4351, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Steve Clark: "NIST Express Working Form Programmer's Reference," NISTIR 4407, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Steve Clark: "An Introduction to the NIST PDES Toolkit," NISTIR 4336, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Steve Clark: "QDES Administrative Guide," NISTIR 4334, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Steve Clark: "The NIST PDES Toolkit: Technical Fundamentals," NISTIR 4335, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Sandy Ressler and Steve Clark: "VOILA: A System for Looking at Processes," NISTIR 4196, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Steve Clark and Sandy Ressler: "The Geometry Modeling System User's Guide," NBS Internal Report 3508, National Bureau of Standards, Gaithersburg, MD, 1986.

Conroy, Bill

Joan Wellington and Bill Conroy: "The IGES/PDES Organization (IPO) 1994 Annual Report," PRO Exchange, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

D

Denno, Peter

D. Sanderson and Peter Denno: "Structural Information Mapping with Express-X," (To appear in) ACM Special Interest Group Management Data, June, 2000.

Peter Denno: "Modeling Requirements for Self-integrating Manufacturing Systems," Proceedings of the International Infrastructure Systems for Manufacturing Conference, January, 2000.

Craig Schlenoff, Peter Denno, Robert Ivester and Simon Szykman: "An Analysis of Existing Ontological Systems for Applications in Manufacturing," Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.14, No.4, January, 2000, 257-270.

Edward Barkmeyer, Peter Denno, Shaw Feng, Evan Wallace and Albert Jones: "NIST Response to MES Request for Information," NISTIR 6397, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

Craig Schlenoff, Robert Ivester, Don Libes, Peter Denno and Simon Szykman: "An Analysis of Existing Ontological Systems for Applications in Manufacturing and Healthcare," NISTIR 6301, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

Martin Hardwick, K.C. Morris, David L. Spooner, Tom Rando and Peter Denno: "Lessons Learned Developing Protocols for the Industrial Virtual Enterprise," (To appear in) The Journal of Computer-Aided Design, October, 1998.

Peter Denno: "Dynamic Objects and Meta-level Programming of an EXPRESS Language Environment," Dynamic Objects Workshop; Object World, Boston, MA, April, 1996.

Peter Denno: "Aspects of a Product Model Supporting Apparel Virtual Enterprises," NISTIR 5821, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Peter Denno: NIIIP Reference Architecture - Glossary, NIIIP Consortium, 1996.

Diaz, Cathleen

Cathleen Diaz: "Algorithm Testing and Evaluation Program for Coordinate Measuring Systems: Testing Methods," NISTIR 5686, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Cathleen Diaz and Ted Hopp: "Evaluation of Software for Coordinate Measuring Systems," Proceedings of the 1995 SEM Clinic, June, 1995.

Cathleen Diaz: "Algorithm Testing and Evaluation Program for Coordinate Measuring System: Long Range Plan," NISTIR 5651, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Cathleen Diaz and Ted Hopp: "Testing of Coordinate Measuring System Software," Proceedings of the 1994 NCSL Workshop & Symposium, Chicago, IL, July, 1994.

Cathleen Diaz: "Concept for an Algorithm Testing & Evaluation Program at NIST," NISTIR 5366, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Mary Beth Algeo and Cathleen Diaz: "A Process for Selecting Standard Reference Algorithms for Evaluating Coordinate Measurement Software," NISTIR 5374, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Cathleen Diaz and C. Pawlak: "User's Guide for the Algorithm Testing System/Version 1.1," NISTIR 5137, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Duffey, Michael

Rachuri Sudarsan, Yadati Narahari, Kevin Lyons, Michael Duffey and Ram Sriram: "Design for Tolerance of Electro-Mechanical Assemblies: An Integrated Approach," NISTIR 6223, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Rachuri Sudarsan, Y. Narahari, Kevin Lyons and Michael Duffey: "Design for Tolerance of Electro-Mechanical Assembles," Proceedings of IEEE International Conference on Robotics and Automation, Lueven, Belgium, May 1998.

Kevin Lyons and Michael Duffey: "Modeling the Product Realization Process: Requirements, Methods and Research Issues for Computer Support Tools," Proceedings of FAIM'95 (Flexible Automation and Intelligent Manufacturing), Stuttgart, Germany, June, 1995.

Kevin Lyons and Michael Duffey: "Requirements, Methods and Research Issues for Modeling the Product Realization Process," Proceedings of the IFIP Workshop - Working Group 5.7, Reengineering the Enterprise, Galway, Ireland, April, 1995.

E

F

Fahey, Mary Lou

Gary Carver and Fahey, Mary Lou: "Information Systems for Manufacturing Publications from the Factory Automation Systems Division," LP 101, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Feng, Shaw

Ram Sriram, Mike Pratt, Shaw Feng and E.Y. Song: "Information Modeling on Conceptual Design Integrated with Process Planning," Recent Advances in Design for Manufacture, DE-Vol.109, the Proceedings of the 2000 International Mechanical Engineering Congress and Exposition, November, 2000, 123-130.

Shaw Feng and M. Hattori: "Cost and Process Information Modeling for Dry Machining," Proceedings of the International Workshop on Environment and Manufacturing, October, 2000.

Shaw Feng and E.Y. Song: "Information Modeling on Conceptual Process Planning Integrated with Conceptual Design," Proceedings of the 5th Design for Manufacturing Conference in the 2000 ASME Design Engineering Technical Conferences, Paper Number DETC00/DFM-14009, September 10-13, 2000, Baltimore, MD.

Shaw Feng: "Manufacturing Planning and Execution Objects Foundation Interfaces," Journal of Manufacturing Systems, Vol.19, No.1, March, 2000, 1-17.

Edward Barkmeyer, Peter Denno, Shaw Feng, Evan Wallace and Albert Jones: "NIST Response to MES Request for Information," NISTIR 6397, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

Shaw Feng and Lihong Qiao: "STEP AP213 Coverage Analysis," NISTIR 6207, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Walter Nederbragt, Robert Allen, Shaw Feng, Serge Kaing, Ram Sriram and Yuyun Zhang: "The NIST Design/Process Planning Integration Project," Proceedings of Advanced Technology & Manufacturing: State-of-the-Art & State of Practice Workshop Workshop Proceedings, Atlanta, GA, August 31, 1998 - September 2, 1998.

Venkat Allada, Shaw Feng and Steven Ray: "Development of a Message Model to Support Integrated Design and Manufacturing," Proceedings of International Conference on Industrial Engineering Applications & Practice, San Diego, CA, November 12-15, 1997.

Mike Iuliano, Albert Jones and Shaw Feng: "An Analysis of AP213 for Usage as a Process Plan Exchange Format," NISTIR 5992, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Edward Barkmeyer, Neil Christopher, Shaw Feng, James Fowler, Simon Frechette, Albert Jones, Kevin Jurrens, Charles McLean, Mike Pratt, Harry A. Scott, M. K. Senehi, Ram Sriram and Evan Wallace: "SIMA Reference Architecture Part I: Activity Models," NISTIR 5939, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Shaw Feng: "Open Systems Interface Specification for Machining Process Planning Integration," Proceedings of the 12th International Conference on CAD/CAM, Robotics, and Factories of Future, London, England, August 14-16, 1996.

Shaw Feng: "A Machining Process Planning Activity Model for System Integration," NISTIR 5808, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Shaw Feng, C. Zhang and Steven Ray: "An Architecture of Component - Based CAPP Systems for Agile Manufacturing," Proceedings of the 1996 NSF Design and Manufacturing Grantees Conference, Albuquerque, NM, February, 1996.

Shaw Feng and C. Zhang: "A Modular Architecture for Rapid Development of CAPP Systems for Agile Manufacturing," IIE Transactions Focused Issue on Design and Manufacturing, 1996.

Shaw Feng: "A Dimensional Inspection Planning Activity Model," NISTIR 5497, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Shaw Feng: "Dimensional Inspection Planning Based on Product Data Standards," Proceedings of Concurrent Engineering: Research and Applications Conference and Application, August, 1994.

Mary Beth Algeo, Shaw Feng and Steven Ray: "A State-of-the-Art Survey on Product Design and Process Planning Integration Mechanisms," NISTIR 5548, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Shaw Feng and Y. Yang: "A Dimensional and Tolerance Data Model for Concurrent Design and System Integration," Journal of Manufacturing Systems, 1994.

Shaw Feng: "Dimensional Inspection Planning Based on STEP and DMIS," NISTIR 5183, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Shaw Feng: "Comparison of ISO 10303 Part 47 Draft with ANSI and ISO Tolerancing Standards for Harmonization and Completion of Part 47," NISTIR 4744, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Shaw Feng and Ted Hopp: "A Review of Current Geometric Tolerancing Theories and CMM Inspection Data Analysis Algorithm," NISTIR 4509, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Flater, David

David Flater: "Debugging Agent Interactions: A Case Study," To appear in the proceedings of the 6th ACM Symposium on Applied Computing, March 2001.

David Flater: "Specification of Interactions in Integrated Manufacturing Systems," NISTIR 6484, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

David Flater: "Testing for Feasible Performance of a Distributed Manufacturing System: a Brief Experience Report," Proceedings of the 4th World Multiconference on Systemics, Cybernetics and Informatics, Volume VIII, p.572-574, July 2000.

David Flater: "Testing for Imperfect Integration of Legacy Software Components," Proceedings of the 1st Asia-Pacific Conference on Quality Software, October 2000, 156-165.

David Flater: "Specification of Interactions in Integrated Manufacturing Systems," Proceedings of the 4th International Conference on Design of Information Infrastructure Systems for Manufacturing, Melbourne, Australia, November 2000. CD-ROM file name /Papers/343.pdf. (Note: paper proceedings forthcoming.).

K.C. Morris and David Flater: "Design of a Flexible, Integrated Testing System for STEP and OMG Standards," Computer Standards and Interfaces, 2000, v. 22, n. 5, February, 2000, 297-305.

David Flater and K.C. Morris: "Testability of Product Data Management Interfaces," NISTIR 6429, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

David Flater, Edward Barkmeyer and Evan Wallace: "Towards Unambiguous Specifications: Five Alternative Job Control Models for An Object-Oriented, Hierarchical Shop Control System," In Proceedings of the 1999 ASME Design Engineering Technical Conferences, Las Vegas, Nevada, CD-ROM file name Pdfs/Cie/9012.pdf., ASME Technical Publishing, September 1999..

K.C. Morris and David Flater: "Standards-Based Software Testing in a Net-Centric World," In Proceedings of the Ninth International Workshop on Software Technology and Engineering Practice (STEP '99), Pittsburgh, Pennsylvania, IEEE Computer Society, September 1999, 115-122.

David Flater: "Manufacturer's CORBA Interface Testing Toolkit: Overview," Journal of Research of the National Institute of Standards & Technology, v. 104, January, 1999, 193-200.

K.C. Morris, David Flater, Don Libes and Albert Jones: "Testing of Interaction-driven Manufacturing Systems," NISTIR 6260, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

David Flater: "CIM Framework Experience Report for 1996," NISTIR 6057, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

David Flater, Edward Barkmeyer and Evan Wallace: "State Models for Jobs and Job Supervisors," NISTIR 6037, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

David Flater: "Programmer's Guide to the 1996 Demo Executor," NISIR 5980, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

David Flater: "Generalized Message Passing in a Virtual Reality Application," Journal of Object-Oriented Programming, Vol. 9, No. 9, February, 1997.

David Flater: "A Brief Introduction to XTide," Linux Journal, #32, December, 1996, pp. 51-57.

David Flater: "Alibi: A Novel Approach to Resource Discovery," Internet Research: Electronic Networking Applications and Policy, Vol. 5, No. 4, 1995, pp. 17-30.

Ford, Sandra

Howard Bloom, Sandra Ford and Mary Mitchell: "Standard for the Exchange of Product Model Data (STEP): Ready for Industry Implementation," Manufacturing Review Journal, Vol. 7, No. 4, December, 1994.

Fowler, James

James Fowler and Mark Carlisle: "Information Technology for Engineering and Manufacturing," Journal of Research of the National Institute of Standards and Technology, November, 2000.

James Fowler: "Systems Integration for Manufacturing Applications (SIMA) 1998 Annual Report," NISTIR 6339, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

James Fowler: "Systems Integration for Manufacturing Applications Technical Program Plan," NISTIR 5986, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Edward Barkmeyer, Neil Christopher, Shaw Feng, James Fowler, Simon Frechette, Albert Jones, Kevin Jurrens, Charles McLean, Mike Pratt, Harry A. Scott, M. K. Senehi, Ram Sriram and Evan Wallace: "SIMA Reference Architecture Part I: Activity Models," NISTIR 5939, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

James Fowler: "Variant Design for Mechanical Artifacts: A State-of-the-Art Survey," Engineering with Computers Journal, Springer-Verlag London Limited - 1996, August, 1996.

Mary Beth Algeo, James Fowler and Kevin Jurrens: "Computerized Representation of Manufacturing Resources: Validation and Standardization," Proceedings of 1996 Japan-USA Symposium on Flexible Automation, ASME, Boston, MA, July 8-10, 1996.

James Fowler and Mark Luce: "Systems Integration for Manufacturing Applications Program 1995 Annual Report," NISTIR 5839, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

James Fowler, Mary Beth Algeo and Kevin Jurrens: "Computerized Representations of Manufacturing Resources: Statement of Need and a Proposed Solution," 1996 Japan-USA Symposium on Flexible Automation, May, 1996.

Kevin Jurrens, Mary Beth Algeo and James Fowler: Beyond Product Design Data: Data Standards for Manufacturing Resources, to be published as Chapter 5 in Edited by Prof. Jian Dong, published by Chapman and Hall, Rapid Response Manufacturing: Contemporary methodologies, tools, and technniques, 1996, Dr. Jian Dong (editor), Chapman and Hall.

Kevin Jurrens, James Fowler and Mary Beth Algeo: "Modeling of Manufacturing Resource Information, Requirements Specification," NISTIR 5707, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Steve Clark, Allison Barnard Feeney and James Fowler: "Specifications for an Application Protocol Development Environment," NISTIR 5248, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

James Fowler, Kevin Jurrens, Mark Luce and Howard Moncarz: "Testbed Requirements and Implementation Plan for the Rapid Response Manufacturing Intramural Project," NISTIR 5265, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Don Libes and James Fowler: "NIST Express Toolkit: Requirements for Improvements," NISTIR 5212, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Allison Barnard, Steve Clark and James Fowler: "Requirements for an Application Protocol Development Environment," NISTIR 5197, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Don Libes and James Fowler: "Kibitz-Connecting Multiple Interactive Programs Together," "Software - Practice & Experience", John Wiley & Sones, New York, NY, Vol. 23, No. 25, May, 1993.

James Fowler: "Variant Design for Mechanical Artifacts - A State of the Art Survey," NISTIR 5356, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Edward Barkmeyer, James Fowler and S. Magleby: "A Conceptual Architecture for Mechanical Parts Production System Based on STEP," NISTIR 4699, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

James Fowler: "STEP Production Cell Technical Development Plan," NISTIR 4421, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

James Fowler: "PDES Physical File Exchange Testing in the PDES Testbed Validation System," NISTIR 4252, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

James Fowler: "A Generic Architecture for Computer Integrated Manufacturing Software Based on the Product Data Exchange Specification," NISTIR 4168, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Frechette, Simon

Simon Frechette: "STEP Implementations: Solid Model Exchange Results in the AutoSTEP Project," NISTIR 6021, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Edward Barkmeyer, Neil Christopher, Shaw Feng, James Fowler, Simon Frechette, Albert Jones, Kevin Jurrens, Charles McLean, Mike Pratt, Harry A. Scott, M. K. Senehi, Ram Sriram and Evan Wallace: "SIMA Reference Architecture Part I: Activity Models," NISTIR 5939, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Simon Frechette: "Interoperability Requirements for CAD Data Transfer in the AutoSTEP Project," NISTIR 5844, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Clarence Johnson, Simon Frechette and Mark Luce: "The NIST SIMA Interactive Management Workshop," NISTIR 5717, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Simon Frechette and Kevin Jurrens: "Development Plan: Product Data Exchange Network," NISTIR 4431, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Simon Frechette and Charles McLean: "System Requirements Analysis for the U.S. Army Rock Island Arsenal Tool Management System," NISTIR 4369, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Furlani, Cita

Cita Furlani, Joan Wellington and Sharon Kemmerer: "Status of PDES-Related Activities," NISTIR 4432, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

D. Jefferson and Cita Furlani: "Use of the IRDS Standard in CALS," NISTIR 4169, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Cita Furlani: "The National PDES Testbed--An Overview," Proceedings of the UPCADM conference, July, 1989.

Howard Bloom, Cita Furlani, Mary Mitchell and Joan Tyler: "Information Resource Dictionary System: An Integration and Mechanism for Product Data Exchange Specification," NISTIR 3862, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

Cita Furlani, Don Libes, Edward Barkmeyer and Mary Mitchell: "The Distributed Data System of the Automated Manufacturing Research Facility of the National Bureau of Standards," Proceedings of COMPCON SPRING `88, March, 1988.

Cita Furlani, Don Libes, Edward Barkmeyer and Mary Mitchell: "Distributed Databases on the Factory Floor," Proceedings of the First International Symposium on Computerization and Networking of Materials Property Databases, November, 1987.

Cita Furlani: "Hierarchical Control System Emulation Programmer's Manual," NBS Internal Report 3157, National Bureau of Standards, Gaithersburg, MD, 1985.

Cita Furlani: "Hierarchical Control System Emulation User's Manual," NBS Internal Report 3156, National Bureau of Standards, Gaithersburg, MD, 1985.

Howard Bloom, Cita Furlani and A. Barbera: "Emulation as a Design Tool in the Development of Real-Time Control Systems," Proceedings of the Winter Simulation Conference, November, 1984.

J. Albus, A. Barbera, M. Fitzgerald, E. Kent, Charles McLean, H. McCain, Howard Bloom, L. Haynes, Cita Furlani, Edward Barkmeyer, Mary Mitchell, H. Scott, D. Blomquist and R. Kilmer: "A Control System for an Automated Manufacturing Research Facility," Society of Manufacturing Engineering, Robots 8, June, 1984.

Howard Bloom and Cita Furlani: "Emulation as a Design Tool in Real-Time Control Systems," Proceedings of the IASTED Conference on Simulation and Modeling, June, 1984.

Cita Furlani, E. Kent, Howard Bloom and Charles McLean: "The Automated Manufacturing Research Facility of the National Bureau of Standards," Proceedings of the Summer Computer Simulation Conference, July, 1983.

Howard Bloom, Charles McLean, Cita Furlani, T. Johnson, S. Milligan and T. Fortman: "Simulation of a Modular Hierarchical Feedback System," Proceedings of the 21st IEEE Conference on Decision and Control, December, 1982.

Cita Furlani: "Hierarchical Control System Emulation Applications Guide," NBS-GCR-82-410, National Bureau of Standards, Gaithersburg, MD, 1982.

G

Gaines, Daniel M.

William Regli and Daniel M. Gaines: "A National Repository for Design and Process Planning," Proceedings of the National Science Foundation Design and Manufacturing Grantees Conference, Seattle, WA, January 6-9, 1997.

Giachetti, Ronald

Ronald Giachetti: "Evaluating Engineering Functions Over Imprecise Quantities," Proceedings of 7th International Fuzzy Systems Association Congress,Prague, Czech Republic, June 25-29, 1997.

Ronald Giachetti and R. Young: "Analysis of Variability in the Design of Wood Products Under Imprecision," Proceedings of the 6th FUZZ-IEEE International Conference on Fuzzy Systems, Barcelona, Spain, July 1-5, 1997, Volume 3, 1203-1208.

Ronald Giachetti and Kevin Jurrens: "Manufacturing Evaluation of Designs: A Knowledge-Based Approach," Proceedings of 3rd Conference on Information Systems, Research Triangle Park, NC, March 1-5, 1997.

Ronald Giachetti: "A Decision Support Systems for Material and Manufacturing Process Selection," Journal of Intelligent Manufacturing, January, 1997.

Ronald Giachetti: "Manufacturing Process and Material Selection During Conceptual Design," Proceedings of the 6th Industrial Engineering Research Conference, Miami, FL, may 17-18, 1997, January, 1997, 772-777.

Ronald Giachetti: "Evaluating Engineering Equations with Imprecise Quantitites," Proceedings of the Seventh International Fuzzy Systems Association World Congress, Prague, Czech Republic, June 25-29, 1997, Volume 2, 150-155.

Ronald Giachetti: "A Parametric Representation of Fuzzy Numbers and Their Arithmetic Operators," Fuzzy Sets and Systems, Volume 92; No. 2, January, 1997.

Ronald Giachetti, R. Young, A. Roggatz, W. Eversheim and G. Perrone: "A Methodology for the Reduction of Imprecision in the Engineering Process," European Journal of Operations Research, Volume 100, No. 2, November, 1996, 277-292.

Gruttke, William

Mary Mitchell and William Gruttke: "Migration Plan for Product Data Standards," E-Com Magazine, 1996.

H

Han, Jung-Hyun

Jung-Hyun Han, Mike Pratt and William Regli: "Manufacturing Feature Recognition from Solid Models: A Status Report," IEEE Trans. on Robotics and Automation (2000), June, 2000.

Jung-Hyun Han: "On Multiple Interpretations," Proceedings of ACM Solid Modeling Symposium, Atlanta, GA, May 14-16, 1997.

Hart, Peter

Kevin Lyons, Peter Hart, Steven Shooter and Walid Keirouz: "The Open Assembly Design Environment Project: An Architecture for Design Agent Interoperability," Proceedings of ASME Design Engineering Technical Conference, Las Vegas, NV, September 1998.

Kevin Lyons, Peter Hart, Sankar Jayaram, Yong Wang and Uma Jayaram: "A Virtual Assembly Design Environment," Proceedings of IEEE Virtual Reality '99 Conference, Houston, TX, March 13-17, 1999.

Michelle Potts Steves and Peter Hart: "The MITT Electronic Library: Implementation Description," NISTIR 5656, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Hopp, Ted

Lisa Carnahan, Gary Carver, Martha Gray, Mike Hogan, Ted Hopp, Jeffrey Horlick, Gordon Lyon and Elena Messina: "Metrology for Information Technology (IT)," NISTIR 6025, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Ted Hopp: "Representation of Axes for Geometric Fitting," NISTIR 5897, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Ted Hopp and C. Reeve: "An Algorithm for Computing the Minimum Covering Sphere in Any Dimension," NISTIR 5831, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Ted Hopp and M. S. Levenson: "Performance Measures for Geometric Fitting in the NIST Algorithm Testing and Evaluation Program for Coordinate Measurement Systems," NIST Journal of Research, September, 1995.

Ted Hopp: "User's Guide to "SuperFit" Modeling Software for CMM Probe Lobing," NISTIR 5720, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Edward Barkmeyer, Ted Hopp, Mike Pratt and Gaylen Rinaudot: "Background Study: Requisite Elements, Rationale, and Technology Overview for the Systems Integration for Manufacturing Applications (SIMA) Program," NISTIR 5662, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Cathleen Diaz and Ted Hopp: "Evaluation of Software for Coordinate Measuring Systems," Proceedings of the 1995 SEM Clinic, June, 1995.

Ted Hopp: "The Sensitivity of Three-Point Circle Fitting," NISTIR 5501, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Cathleen Diaz and Ted Hopp: "Testing of Coordinate Measuring System Software," Proceedings of the 1994 NCSL Workshop & Symposium, Chicago, IL, July, 1994.

Ted Hopp: "Computational Metrology," Manufacturing Review, Volume 6, Number 4, December, 1993.

Ted Hopp: "The Language of Tolerances," Proceedings of the Indo-U.S.-Japanese Conference on Quality through Engineering Design, January, 1993.

Mary Beth Algeo and Ted Hopp: "Form Error Models of the NIST Algorithm Testing System," NISTIR 4740, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

J. Hsu, T. Hsu, J. Filliben and Ted Hopp: "A Comparative Study of CMM Flat-Surface Inspection Plans," NISTIR 4897, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Shaw Feng and Ted Hopp: "A Review of Current Geometric Tolerancing Theories and CMM Inspection Data Analysis Algorithm," NISTIR 4509, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Ted Hopp: "The Mathematics of Datums," ASPE Newsletter, American Society of Precision Engineering, September, 1990.

K. Bowman, Ted Hopp, R. Kacker and R. Lundegard: "Statistical Quality Control Technology in Japan--A Report for the Office of Naval Research," The Scientific Information Bulletin, March, 1990.

Ted Hopp and C. Reeve: "An Algorithm for Computing the Minimum Covering Sphere in any Dimension," SIAM Journal of Computing, 1989.

Howard Moncarz, Ted Hopp and P. Leazark: "Implementation of the Coordinate Measuring Machine Controller," NISTIR 3874, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

Ted Hopp: "AMRF Database Report Format: Part Model," NBS Internal Report 3672, National Bureau of Standards, Gaithersburg, MD, 1987.

J. Tu and Ted Hopp: "Part Geometry Data in the AMRF," NBS Internal Report 3551, National Bureau of Standards, Gaithersburg, MD, 1987.

Ted Hopp, D. Swyt and T. Carlton: "Quality Control in Automated Manufacturing," Proceedings of the Measurement Science Conference, January, 1986.

Ted Hopp: "CAD-Directed Inspection," 14th CIRP General Assembly, August, 1984.

Ted Hopp and K. Lay: "A Hierarchical Model-Based Control System for Inspection," First International Symposium in Automated Integrated Manufacturing, April, 1983.

Charles McLean, Howard Bloom and Ted Hopp: "The Virtual Manufacturing Cell," Proceedings of the IFAC/IFIP Conference on Information Control Problems in Manufacturing Technology, October, 1982.

I

Iuliano, Mike

Albert Jones and Mike Iuliano: "A Simulation-Based Production Testbed," Proceedings of Winter Simulation Conference, , 1997.

Mike Iuliano: "The Role of Product Data Management in the Manufacturing Engineering ToolKit," NISTIR 6042, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Mike Iuliano, Albert Jones and Shaw Feng: "An Analysis of AP213 for Usage as a Process Plan Exchange Format," NISTIR 5992, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Mike Iuliano and Albert Jones: "Controlling Activities in a Virtual Manufacturing Cell," Proceedings of the Winter Simulation Conference, 1996, Coronada, CA, November, 1996.

Mike Iuliano: "Overview of the Manufacturing Engineering Toolkit Prototype," NISTIR 5730, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Ivester, Robert

Craig Schlenoff, Peter Denno, Robert Ivester and Simon Szykman: "An Analysis of Existing Ontological Systems for Applications in Manufacturing," Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.14, No.4, January, 2000, 257-270.

Craig Schlenoff, Robert Ivester, Don Libes, Peter Denno and Simon Szykman: "An Analysis of Existing Ontological Systems for Applications in Manufacturing and Healthcare," NISTIR 6301, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

Amy Knutilla, Craig Schlenoff and Robert Ivester: "A Robust Ontology for Manufacturing Systems Integration," Proceedings of 2nd International Conference on Engineering Design and Automation, Maui, Hawaii, August 7-14, 1998.

Robert Ivester: "Enhancing Recursive Constraint Bounding for Improved Robustness, Functionality, and Flexibility," Proceedings of 3rd Agile Manufacturing Conference, Albuquerque, MN, May 28 - 29, 1997.

J

Johnson, Clarence

Clarence Johnson, Simon Frechette and Mark Luce: "The NIST SIMA Interactive Management Workshop," NISTIR 5717, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Jones, Albert

Albert Jones and Mike Iuliano: "A Simulation-Based Production Testbed," Proceedings of Winter Simulation Conference, , 1997.

Albert Jones, R. Wysk and Y.J. Son: "Automatic Generation of Simulation Models from Neutral Libraries: An Example," Proceedings of the Winter Simulation Conference, Orlando, FL, December 10-13, 2000.

Albert Jones, Evan Wallace and Y. Yih: "Monitoring and Controlling Operations," The Handbook of Industrial Engineering, March, 2000.

Edward Barkmeyer, Peter Denno, Shaw Feng, Evan Wallace and Albert Jones: "NIST Response to MES Request for Information," NISTIR 6397, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

K.C. Morris, David Flater, Don Libes and Albert Jones: "Testing of Interaction-driven Manufacturing Systems," NISTIR 6260, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Albert Jones and Luis C. Rabelo: "Survey of Job Shop Scheduling Techniques," NISTIR, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Shigeki Umeda and Albert Jones: A Simulation-Based BRP Support System for Supply Chain Management, Re-Engineering in Action: The Quest for World Class Excellence, 1998.

Kimberley Ellis, Albert Jones and Tina Lee: "Requirements Analysis: Process Plan Specification - Workstation Level," NISTIR 6172, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Anna Bartolotta, Charles Mclean, Y. T. Lee and Albert Jones: "Production Systems Engineering: Requirements Analysis for Discrete-Event Simulation," NISTIR 6154, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Christophe Lecapitaine, Frank Riddick and Albert Jones: "IMES II - Production Management Standards: Requirements Analysis for Shop Floor Status," NISTIR 6123, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Albert Jones and Charles McLean: "Industrial Need: Production Management Standards," NISTIR 6058, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Shigeki Umeda and Albert Jones: "Virtual Supply Chain Management: A Re-Engineering Approach Using Discrete Event Simulation," Proceedings of SCI '97 World Conference, , 1997, July, 1997.

Shigeki Umeda and Albert Jones: "Simulation in Japan: State-of-the-Art Update," NISTIR 6040, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Mike Iuliano, Albert Jones and Shaw Feng: "An Analysis of AP213 for Usage as a Process Plan Exchange Format," NISTIR 5992, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Edward Barkmeyer, Neil Christopher, Shaw Feng, James Fowler, Simon Frechette, Albert Jones, Kevin Jurrens, Charles McLean, Mike Pratt, Harry A. Scott, M. K. Senehi, Ram Sriram and Evan Wallace: "SIMA Reference Architecture Part I: Activity Models," NISTIR 5939, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Mike Iuliano and Albert Jones: "Controlling Activities in a Virtual Manufacturing Cell," Proceedings of the Winter Simulation Conference, 1996, Coronada, CA, November, 1996.

Albert Jones, Frank Riddick and L. Rabelo: "Development of a Predictive-Reactive Scheduler using Genetic Algorithms and Simulation-based Scheduling Software," AMPST 96, April, 1996.

Albert Jones, L. Rabelo and Y. Yih: Job Shop Scheduling, Encyclopedia of Operations Research, 1996.

Albert Jones, Y. Sun, Y. Yih and L. Rabelo: "A Neural Network Based Scheduling System for Flexible Manufacturing Cells," Materials Handling Engineering Division, 75th Commemorative Volume, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Albert Jones, Y. Yih and Y. Sun: "A Neural Network Based Cell Controller for Automated Manufacturing Cells," NISTIR 5718, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

L. Rabelo and Albert Jones: "Knowledge Based Reactive Scheduling using Integration of Neural Nets, Simulation, Genetic Algorithms and Machine Learning," Proceedings of the IFIP SIG Third Workshop KBRS'95, Seattle, WA, September, 1995.

Albert Jones: "Simulation: State of th Art in Japan," Proceedings of New Directions in Simulation for Manufacturing and Communications, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

W. Davis and Albert Jones: "Mathematical Decomposition and Simulation in Real-Time Production Scheduling," NBS Internal Report 3639, National Bureau of Standards, Gaithersburg, MD, 1987.

R. Jackson and Albert Jones: "Hierarchical Decision-Making in the Factory of the Future," NBS Internal Report 3511, National Bureau of Standards, Gaithersburg, MD, 1987.

R. Jackson and Albert Jones: "An Architecture for Decision-Making in the Factory of the Future," Special Issue of ORSA Interfaces on Flexible Manufacturing,, 1987.

Albert Jones and Charles McLean: "A Proposed Hierarchical Control Model for Automated Manufacturing Systems," Journal of Manufacturing Systems, 1986.

Albert Jones and Charles McLean: "Production Control Module for the AMRF," Proceedings of the 1985 ASME Computers in Engineering Conference, August, 1985.

Albert Jones and Charles McLean: "A Cell Control System for the AMRF," Proceedings of the 1984 ASME International Computers in Engineering Conference, August, 1984.

Jun, J.

J. Jun: "The Vertical Machining Workstation Systems," NISTIR 3890, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

Tom Kramer and J. Jun: "The Design Protocol, Part Design Editor, and Geometry Library of the Vertical Workstation of the Automated Manufacturing Research Facility at the National Bureau of Standards," NISTIR 3717, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

I. Nakpolohpo and J. Jun: "Automated Equipment Program Generator and Execution System of the AMRF Vertical Machining Workstation," Proceedings of the Symposium on Integrated and Intelligent Manufacturing: Analysis and Synthesis, December, 1987.

J. Jun and Charles McLean: "Control of an Automated Machining Workstation," Proceedings of the American Control Conference, June, 1987.

Tom Kramer and J. Jun: "Software for an Automated Machining Workstation," Proceedings of the International Machine Tool Show Technical Conference, September, 1986.

Jurrens, Kevin

D. Dutta, A.D. Bhatt, Kevin Jurrens, Kevin Lyons, Mike Pratt and Ram Sriram: "Representation of Heterogeneous Objects in ISO 10303 (STEP)," Proceedings of the ASME Conference, Orlando, FL, November 5-11, 2000.

Kevin Jurrens: "Standards for the Rapid Prototyping Industry," Proceedings of Future of Rapid Prototyping Conference Proceedings, Internet site: http://www.mcb.co.uk/services/conferen/announcements/forp_announcement.htm, June 30, 1998 - September 30, 1998.

Ronald Giachetti and Kevin Jurrens: "Manufacturing Evaluation of Designs: A Knowledge-Based Approach," Proceedings of 3rd Conference on Information Systems, Research Triangle Park, NC, March 1-5, 1997.

Edward Barkmeyer, Neil Christopher, Shaw Feng, James Fowler, Simon Frechette, Albert Jones, Kevin Jurrens, Charles McLean, Mike Pratt, Harry A. Scott, M. K. Senehi, Ram Sriram and Evan Wallace: "SIMA Reference Architecture Part I: Activity Models," NISTIR 5939, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Mary Beth Algeo, James Fowler and Kevin Jurrens: "Computerized Representation of Manufacturing Resources: Validation and Standardization," Proceedings of 1996 Japan-USA Symposium on Flexible Automation, ASME, Boston, MA, July 8-10, 1996.

James Fowler, Mary Beth Algeo and Kevin Jurrens: "Computerized Representations of Manufacturing Resources: Statement of Need and a Proposed Solution," 1996 Japan-USA Symposium on Flexible Automation, May, 1996.

Kevin Jurrens, Mary Beth Algeo and James Fowler: Beyond Product Design Data: Data Standards for Manufacturing Resources, to be published as Chapter 5 in Edited by Prof. Jian Dong, published by Chapman and Hall, Rapid Response Manufacturing: Contemporary methodologies, tools, and technniques, 1996, Dr. Jian Dong (editor), Chapman and Hall.

Kevin Jurrens, James Fowler and Mary Beth Algeo: "Modeling of Manufacturing Resource Information, Requirements Specification," NISTIR 5707, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Kevin Jurrens: "An Assessment of the State-of-the-Art in Rapid Prototyping Systems for Mechanical Parts," NISTIR 5335, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

James Fowler, Kevin Jurrens, Mark Luce and Howard Moncarz: "Testbed Requirements and Implementation Plan for the Rapid Response Manufacturing Intramural Project," NISTIR 5265, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Kevin Jurrens and Mark Luce: "Project Plan for the Rapid Response Manufacturing (RRM) Intramural Project," NISTIR 5174, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Kevin Jurrens: "Test Plan for Validating a Context Driven Integrated Model (CDIM) for Sheet Metal Die Design," NISTIR 4699, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Simon Frechette and Kevin Jurrens: "Development Plan: Product Data Exchange Network," NISTIR 4431, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

K

Katz, Susan

Susan Katz: "Configuration Management of the STEP Documents: Procedures and System Requirements," NISTIR 4629, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Susan Katz: "Configuration Management Concepts Document," NISTIR 4538, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Susan Katz: "STEP On-Line Information Service User's Guide," NISTIR 4491, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Sandy Ressler and Susan Katz: "Development Plan: Configuration Management Systems and Services," NISTIR 4413, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Kemmerer, Sharon

Sharon Kemmerer: "STEP: The Grand Experience," (Editor of) NIST Special Publication 939, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

Sharon Kemmerer, Barbara Goldstein and P. Curts: "A Brief History of Early Product Data Exchange Standards," NISTIR 6621, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Sharon Kemmerer: "Initial Manufacturing Exchange Specification (IMES), IMES Concept Document for Manufacturing Systems Integration," NISTIR 5978, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Sharon Kemmerer: "Requirements and Recommendations for STEP Conformance Testing," NISTIR 4743, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Cita Furlani, Joan Wellington and Sharon Kemmerer: "Status of PDES-Related Activities," NISTIR 4432, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Kim, Gerard

Ram Sriram, S.R. Gorti, A. Gupta, Gerard Kim and A. Wong: "An Object-Oriented Representation for Product and Design Processes," Journal of CAD, Volume 30, No. 7, April, 1998, 489 - 501.

Simon Szykman and Gerard Kim: "Combining Interactive Exploration and Optimization for Assembly Design," ASME Journal of Mechanical Design, Vol. 120, No. 1, 1998, pp.24-31.

Gerard Kim and Simon Szykman: "Combining Interactive Exploration and Optimization for Assembly Design," Proceedings of the 1996 ASME Design Engineering Technical Conferences and Computers in Engineering Conference (22nd Design Automation Conference), Paper No. 96-DETC/TAC-1482, Irvine, CA, August, 1996.

Gerard Kim, Gorti, S.R., Gupta, A., Wong, A. and Ram Sriram: "An Object-oriented Representation of Product and Design," Journal of Computer Aided Design, August, 1996.

Gerard Kim: "A Decision-based Framework for Exploring Assembly Configuration," Proceedings of the 95 Concurrent Engineering Conference, August, 1995.

Gerard Kim: "Comparative Assembly Planning for Assembly Design," Proceedings of the 95 IEEE International Symposium on Assembly and Task Planning, August, 1995.

Kirsch Russell

Russell Kirsch: "Development of Computers at the National Bureau of Standards," To appear in the NBS/NIST Classic Publication Volume, September, 2000.

J. Kirsch, Russell Kirsch and Sandy Ressler: "Computers Viewing Artists at Work," Proceedings of Syntactic and Structural Pattern Recognition, March, 1987.

Russell Kirsch: "Pictures as Primary Sources for Computer-Based Art History Data," Proceedings of the International Conference on Automatic Processing of Art History Data, September, 1984.

Knutilla, Amy

Robert Allen, Amy Knutilla and Michelle Potts Steves: "Workshop on Evaluating Collaborative Enterprises - Workshop Report," Proceedings of the IEEE Workshop on Enabling Technologies: Infrastructure for Collaborative Enterprises (WETICE), Gaithersburg, MD, June 14-16, 2000.

Michelle Potts Steves and Amy Knutilla: "Collaboration Technologies for Global Manufacturing," To appear in the Proceedings of IMECE: International Mechanical Engineering Congress and Exhibition, November, 1999.

Michelle Potts Steves, Wo Chang and Amy Knutilla: "Supporting Manufacturing Process Analysis and Trouble Shooting with ACTS," In Proceedings of the IEEE 8th International Workshop on Enabling Technologies Infrastructure for Collaborative Enterprises (WETICE), June, 1999..

Amy Knutilla, Craig Schlenoff and Steven Ray: "An Anaylis of Requirements for Specifying Manufacturing Engineering and Business Processes," NISTIR 6364, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Amy Knutilla, Craig Schlenoff and Robert Ivester: "A Robust Ontology for Manufacturing Systems Integration," Proceedings of 2nd International Conference on Engineering Design and Automation, Maui, Hawaii, August 7-14, 1998.

Amy Knutilla, Craig Schlenoff, Steven Ray, Stephen T. Polyak, Austin Tate, Shu Chiun Cheah and Richard C. Anderson: "Process Specification Language: An Analysis of Existing Representations," NISTIR 6160, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Craig Schlenoff, Amy Knutilla and Steven Ray: "Proceedings of the First Process Specification Language (PSL) Roundtable," NISTIR 6081, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Craig Schlenoff, Amy Knutilla and Steven Ray: "Requirements for Modeling Manufacturing Process: A New Perspective," Proceedings of Design Engineering Conferences, Sacremento, CA, September 1997.

Michael Gruninger, Craig Schlenoff and Amy Knutilla: "Using Process Requirements as the Basis for the Creation and Evaluation of Process Ontologies for Enterprise Modeling," ACM SIGGROUP Bulletin, Vol. 18, No. 3, August, 1997.

Craig Schlenoff, Amy Knutilla and Steven Ray: "Unified Process Specification Language: Requirements for Modeling Process," NISTIR 5910, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Kramer, Tom

M. K. Senehi, Tom Kramer, J. Michaloski, R. Quintero, Steven Ray, W. Rippey and Sara Wallace: "Reference Architecture for Machine Control Systems Integration: Interim Report," NISTIR 5517, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Tom Kramer and M. K. Senehi: "Feasibility Study: Reference Architecture for Machine Control Systems Integration," NISTIR 5297, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Tom Kramer, K.C. Morris and David Sauder: "A Structural EXPRESS Editor," NISTIR 4903, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Tom Kramer: "The Library of Material Removal Shape Element Volumes (MRSEVs)," NISTIR 4809, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Tom Kramer: "Issues Concerning Material Removal Shape Element Volumes (MRSEVs)," NISTIR 4804, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Tom Kramer, M. Palmer and Allison Barnard Feeney: "Issues and Recommendations for a STEP Application Protocol Framework," NISTIR 4755, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Tom Kramer: "Extracting STEP Geometry and Topology from a Solid Modeler: Parasolid-to-STEP," NISTIR 4577, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Tom Kramer: "Pocket Milling with Tool Engagement Detection," none, 1991.

Tom Kramer: "The Off-Line Programming System (OLPS): A Prototype STEP-Based N-C Program Generator," none, 1991.

Tom Kramer: "Enhancements to the vws Data Preparation Software," NISTIR 4201, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Tom Kramer: "Contour Outlines," NISTIR 4586, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Tom Kramer: "Automatic Generation of NC-Code for Hole Cutting with In-Process Metrology," Proceedings of the IEEE Instrumentation and Measurement Technology Conference, April, 1989.

Tom Kramer: "A Parser that Converts a Boundary Representation into a Features Representation," NBSIR 3864, National Bureau of Standards, Gaithersburg, MD, 1988.

Tom Kramer: "The Graphics Subsystem of the Vertical Workstation of the Automated Manufacturing Research Facility of the National Bureau of Standards," NBSIR 3783, National Bureau of Standards, Gaithersburg, MD, 1988.

Tom Kramer: "Process Planning for a Milling Machine From a Feature-Based Design," Proceedings of AMSE Manufacturing International, April, 1988.

Tom Kramer: "Data Handling in the Vertical Workstation of the Automated Manufacturing Research Facility at the National Bureau of Standards," NBSIR 3763, National Bureau of Standards, Gaithersburg, MD, 1988.

Tom Kramer: "The vws_cadm User Interface in the Vertical Workstation of the Automated Manufacturing Research Facility at the National Bureau of Standards," NBSIR 3738, National Bureau of Standards, Gaithersburg, MD, 1988.

Tom Kramer and R. Weaver: "The Data Execution Module of the Vertical Workstation of the Automated Manufacturing Research Facility of the National Bureau of Standards," NBSIR 3704, National Bureau of Standards, Gaithersburg, MD, 1988.

Tom Kramer and J. Jun: "The Design Protocol, Part Design Editor, and Geometry Library of the Vertical Workstation of the Automated Manufacturing Research Facility at the National Bureau of Standards," NISTIR 3717, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

Tom Kramer and W. Strayer: "Error Prevention and Detection in Data Preparation for a Numerically Controlled Milling Machine," NISTIR 3677, National Institute of Standards and Technology, Gaithersburg, MD, 1987.

Tom Kramer: "Process Plan Expression, Generation, and Enhancement for the Vertical Workstation Milling Machine in the Automated Manufacturing Research Facility at the National Bureau of Standards," NBS Internal Report 3678, National Bureau of Standards, Gaithersburg, MD, 1987.

Tom Kramer and J. Jun: "Software for an Automated Machining Workstation," Proceedings of the International Machine Tool Show Technical Conference, September, 1986.

Tom Kramer: "Integrated Automated Manufacture of Metal Parts," Proceedings of the IEEE National Aerospace & Electronics Conference, May, 1986.

Tom Kramer: "Automated Analysis of Operators on State Tables: A Technique for Intelligent Search," Journal of Automated Reasoning, 1986.

Krishnamurthy, V.

Stanley Su, V. Krishnamurthy and H. Lam: "An Object-oriented Semantic Association Model, AI in Industrial Engineering and Manufacturing: Theoretical Issues and Applications(OSAM*)," American Institute of Engineers, 1988.

V. Krishnamurthy, Stanley Su, H. Lam, Mary Mitchell and Edward Barkmeyer: "A Distributed Database Architecture for an Integrated Manufacturing Facility," Proceedings of the Conference on Data and Knowledge Systems for Engineering and Manufacturing,, October, 1987.

Kumar, A.

Stanley Su and A. Kumar: "Modeling Partitioned and Replicated Databases Using an Extended Concept of Generalization," Proceedings of the COMPSAC '87 Conference, October, 1987.

L

Lam, H.

Stanley Su, A. Alashqur and H. Lam: "SQL: A Query Language for Manipulation Object-oriented Databases," Proceedings of the 15th International Conference on Very Large Data Bases, 1989.

Stanley Su, V. Krishnamurthy and H. Lam: "An Object-oriented Semantic Association Model, AI in Industrial Engineering and Manufacturing: Theoretical Issues and Applications(OSAM*)," American Institute of Engineers, 1988.

V. Krishnamurthy, Stanley Su, H. Lam, Mary Mitchell and Edward Barkmeyer: "A Distributed Database Architecture for an Integrated Manufacturing Facility," Proceedings of the Conference on Data and Knowledge Systems for Engineering and Manufacturing,, October, 1987.

Edward Barkmeyer, Mary Mitchell, K. Mikkilineni, Stanley Su and H. Lam: "An Architecture for Distributed Data Management in Computer Integrated Manufacturing," NBS Internal Report 3312, National Bureau of Standards, Gaithersburg, MD, 1986.

Lee, Y. T.

Y. T. Lee and S. Umeda: "Management Data Specification for Supply Chain Integration," NISTIR 6703, National Institute of Standards and Technology, Gaithersburg, MD, 2001.

Y. T. Lee, A. Donmez and J.A. Soons: "Information Model for Machine Tool Performance Tests," NISTIR 6580, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

Y. T. Lee, Swee Leong and Charles McLean: "Activity Model: Ship Repair and Conversion," NISTIR 6533, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

Y. T. Lee: "An Overview of Information Modeling for Manufacturing Systems Integration," NISTIR 6382, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

Y. T. Lee: "Information Modeling: From Design to Implementation," (to appear in) IEEE Transactions on Robotics and Automation, September, 1999.

Y. T. Lee: "Information Modeling: From Design to Implementation," Proceedings of Second World Manufacturing Congress September 27-30, 1999, at the University of Durham, U.K..

Y. T. Lee: "Initial Manufacturing Exchange Specification (IMES):Information Model for the Process Plan-Workstation Level," NISTIR 6307, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

Y. T. Lee: "Initial Manufacturing Exchange Specification (IMES): Requirements Analysis forthe Plant Layout Applications," NISTIR 6139, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Anna Bartolotta, Charles Mclean, Y. T. Lee and Albert Jones: "Production Systems Engineering: Requirements Analysis for Discrete-Event Simulation," NISTIR 6154, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Y. T. Lee: "Data Sharing Implementation Based on the Information Model for Apparel Pattern Making," NISTIR 5969, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Y. T. Lee: "Extensions of the Prototype Application Protocol of Ready-to-wear Apparel Pattern Making," NISTIR 5727, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Howard Moncarz and Y. T. Lee: "CALS Technologies Applied to the Fiber/Textile/Apparel Industry," CALS/Enterprise Integration Journal, August, 1994.

Y. T. Lee: "A Bibliography on Apparel Sizing and Related Issues," NISTIR 5365, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Y. T. Lee: "Body Dimensions for Apparel," NISTIR 5411, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Y. T. Lee and Howard Moncarz: "A Prototype Application Protocol for Ready-to-Wear Pattern Making," NISTIR 5115, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Howard Moncarz and Y. T. Lee: "Report of Scoping the Apparel Manufacturing Enterprise," Journal of Clothing Science Technologies, Volume 5, Number 3/4, 1993.

Y. T. Lee: "Apparel Product Data Exchange Standard," Third Annual Academic Apparel Research Conference, February, 1992.

Howard Moncarz and Y. T. Lee: "Apparel STEP Translator," NISTIR 4612, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Y. T. Lee: "On Extending the Standard for the Exchange of Product Data to Represent Two-Dimensional Apparel Pattern Pieces," NISTIR 4358, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Y. T. Lee and Sandy Ressler: "Converting the AMRF Part Model Report to a PDES/STEP Subset," NBSIR 3818, National Bureau of Standards, Gaithersburg, MD, 1988.

Leong, Swee

Y. T. Lee, Swee Leong and Charles McLean: "Activity Model: Ship Repair and Conversion," NISTIR 6533, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

Charles McLean, Swee Leong and Frank Riddick: "Integration of Manufacturing Simulations Using High Level Architecture (HLA)," Proceedings of the 2000 Advanced Simulation Technologies Conference (ASTC 2000), March, 2000.

Charles McLean, Swee Leong and Frank Riddick: "Architecture for Modeling and Simulation of Global Distributed Enterprises," Proceedings of the ASIM 2000 Conference, February, 2000.

Mike Smith, Swee Leong and William Regli: "NIST Manufacturing Process Planning and CAME Forum Workshop," NISTIR 6142, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Charles McLean and Swee Leong: "Industrial Need: Production System Engineering Integration," NISTIR 6019, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Swee Leong and M. Smith: "Computer - Aided Manufacturing Engineering Forum 2nd Technical Meeting Precedings," NISTIR 5846, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Charles McLean and Swee Leong: "A Process Model for Product System Engineering," Proceedings of the IFIP WG 5.7 on Production Management Systems, Seattle, WA, September, 1995.

Charles McLean, Swee Leong and C. Chen: "Issues of Manufacturing Engineering Data Validation in Concurrent Engineering Environment," Proceedings of the IFIP WG 5.7 on Production Management Systems, Seattle, WA, September, 1995.

M. Smith and Swee Leong: "Computer-Aided Manufacturing Engineering," NISTIR 5699, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Libes, Don

Craig Schlenoff, Michael Gruninger, Mihai Ciocoiu and Don Libes: "Process Specification Language (PSL): Results of the First Pilot Implementation," (To appear in) ASME International Mechanical Engineering Congress and Exposition, October, 1999.

Craig Schlenoff, Robert Ivester, Don Libes, Peter Denno and Simon Szykman: "An Analysis of Existing Ontological Systems for Applications in Manufacturing and Healthcare," NISTIR 6301, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

K.C. Morris, David Flater, Don Libes and Albert Jones: "Testing of Interaction-driven Manufacturing Systems," NISTIR 6260, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Don Libes: "A Tcl Package for CGI and HTML Generation," WWW Journal/WWW Consortium, December, 1997.

Don Libes: "Managing Tcl's Namespaces Collaboratively," Proceedings of 5th Annual Tcl/Tk Workshop '97, Boston, MA, July 14-17, 1997.

Don Libes: "Writing a Tcl Extension in Only Seven Years," Proceedings of 5th Annual Tcl/Tk Worshop '97, Boston, MA, July 14-17, 1997.

Don Libes: "Automation and Testing of Character-Graphic Programs," "Software - Practice & Experience", John Wiley & Sons, West Sussex, England, Vol. 27(2), February, 1997, p. 123-137.

Don Libes: "Tcl/Tk-based Agents for Mail and News Notification or "A Tale of Two Biffs"," Software - Practice & Experience, John Wiley & Sons, West Sussex, England, Vol.27(4), p.481-493, 1997.

Don Libes: "How to Avoid Learning Expect -- or -- Automating Automating Interactive Programs," Proceedings of the Tenth USENIX System Administration Conference (LISA X), Chicago, IL, September 30 - October 4, 1996.

Don Libes: "Writing CGI scripts in Tcl," Tel 96 Conference, May, 1996.

Don Libes: "Terminal Emulation for Automation and Testing of Character-Graphic Programs: A Code Walkthrough," Proceedings of The 21st Annual Trenton Computer Festival (TCF '96), Trenton, NJ, May, 1996.

Michelle Potts Steves and Don Libes: "Organization of MSID's On-Line information - Experience and Recommendations," NISTIR 5792, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Don Libes and Steve Clark: "An Object Oriented Tcl-Tk Binding for Interpreted Control of the NIST Express Toolkit in the NIST STEP Application Protocol Development Environment," Proceedings of the EUG'95 (Express User's Group) Conference Grenoble, France, October, 1995.

Don Libes: Expect - A Power Tool for Systems Administration Automation, "System Administration Tools" by D. McNutt, 1995.

Don Libes: Passmass - Changing Passwords on Many Machines Simultaneously, "Internet Power Tools" by Valeria Quercic, 1995.

Don Libes: Ouch Those Programs are Painful, "Internet Power Tools" by Valerie Quercic, 1995.

Don Libes: Vrfy - Verifying an Internet Email Address, "Internet Power Tools" by Valerie Quercic, 1995.

Don Libes: "Handling Passwords with Security and Realizability in Background Processes," Proceedings of LISA VIII Systems Administration Conference, September, 1994.

Don Libes: "X Wrappers for Non-Graphic Interactive Programs," Proceedings of Xhibition '94, June, 1994.

Don Libes: "Concepts of the NIST EXPRESS Server," First International Workshop on Services in Distributed and Networked Environments (SDNE), June, 1994.

Don Libes: "The NIST EXPRESS Server: Usage and Implementation," NISTIR 5323, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Don Libes: "Shtolo - Converting STEP Short Listings to Annotated Listings," NISTIR 5291, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Don Libes: "Exppp - An EXPRESS Pretty Printer," NISTIR 5292, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Don Libes: "The NIST EXPRESS Toolkit: Introduction and Overview," NISTIR 5242, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Don Libes: "The NIST EXPRESS Toolkit: Design and Implementation," 7th Annual Engineering Database Symposium - ASME Computers in Engineering Conference, August, 1993.

Don Libes: "The NIST EXPRESS Toolkit: Updating Existing Applications," NISTIR 5205, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Don Libes: "The NIST EXPRESS Toolkit: Using Applications," NISTIR 5206, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Don Libes: "A Debugger for Tcl Applications," Proceedings of the 1993 Tcl/Tk Conference, June, 1993.

Don Libes and James Fowler: "NIST Express Toolkit: Requirements for Improvements," NISTIR 5212, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Don Libes: "The NIST STEP Part 21 Exchange File Toolkit: An Update," NISTIR 5187, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Don Libes: "The NIST EXPRESS Toolkit: Obtaining and Installing," NISTIR 5204, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Don Libes and James Fowler: "Kibitz-Connecting Multiple Interactive Programs Together," "Software - Practice & Experience", John Wiley & Sones, New York, NY, Vol. 23, No. 25, May, 1993.

Don Libes and Steve Clark: "The NIST EXPRESS Toolkit - Lessons Learned," EXPRESS Users Group Conference, October, 1992.

Don Libes: "Regression Testing and Conformance Testing Interactive Programs," Summer 92' USENIX Conference, June, 1992.

Steve Clark and Don Libes: "The NIST PDES Toolkit: Technical Fundamentals," NISTIR 4815, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Steve Clark and Don Libes: "FED-X: The NIST Express Translator," NISTIR 4822, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Steve Clark and Don Libes: "NIST Express Working Form Programmer's Reference," NISTIR 4814, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Don Libes: "Automating Interactive Applications in the Network Environment," The International Communications Association Journal, 1992.

Don Libes: "expect; Scripts for Controlling Interactive Processes," Computing Systems Magazine, Vol. 4, No. 2, University of California Press, Berkeley, CA, November, 1991.

Don Libes: "A Clock for the Manufacturing Systems Integration Testbed," NISTIR 4666, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Don Libes: "Modeling Dynamic Surfaces with Octrees," Computers & Graphics Magazine, 1991.

J. O'Connell, F. Sullivan, Don Libes, E. Orlandini, M. Tesi, A. Stella and T. Einstein: "Self-Avoiding Random Surfaces: Monte Carlo Study Using Oct-tree Data- structures," The Journal of Physics, 1991.

Don Libes: "Using Expect to Automate System Administration Tasks," Proceedings of the Fourth USENIX Large Installation Systems Administration (LISA), October, 1990.

Don Libes: "expect: Curing Those Uncontrollable Fits of Interaction," Proceedings of the Summer 1990 USENIX Conference, June, 1990.

Don Libes: "Packet-Oriented Communication using a Stream Protocol or Making TCP/IP on Berkley Unix a Little More Pleasant to Use," NISTIR 4232, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Don Libes: "NIST Network Common Memory User Manual," NISTIR 4233, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Don Libes: "Choosing a Name for Your Computer," Communications of the ACM, Vol. 37, No. 11, November, 1989, 1289-1291.

Don Libes: "Modeling Dynamic Surfaces with Octrees," NISTIR 4055, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Siefried Rybczynski, Edward Barkmeyer, Evan Wallace, M. Strawbridge, Don Libes and C. Young: "AMRF Network Communications," NBSIR 3816, National Bureau of Standards, Gaithersburg, MD, 1988.

Cita Furlani, Don Libes, Edward Barkmeyer and Mary Mitchell: "The Distributed Data System of the Automated Manufacturing Research Facility of the National Bureau of Standards," Proceedings of COMPCON SPRING `88, March, 1988.

Don Libes and Edward Barkmeyer: "The Integrated Manufacturing Data Administration System (IMDAS) - An Overview," International Journal of Computer Integrated Manufacturing, 1988.

Cita Furlani, Don Libes, Edward Barkmeyer and Mary Mitchell: "Distributed Databases on the Factory Floor," Proceedings of the First International Symposium on Computerization and Networking of Materials Property Databases, November, 1987.

Don Libes: "Multiple Programs in One UNIX Process," Proceedings of the 1987 Summer USENIX Conference, June, 1987.

Don Libes: "The State of State Tables in the AMRF," NBS Internal Report 3541, National Bureau of Standards, Gaithersburg, MD, 1987.

Don Libes: "User-Level Shared Variables (In a Hierarchical Control Environment)," Proceedings of the 1985 USENIX Conference, June, 1985.

Lo, Jane

Edward Barkmeyer and Jane Lo: "Experience with IMDAS in the Automated Manufacturing Research Facility," NISTIR 4132, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Loureau, Anuk M.

Frank Riddick and Anuk M. Loureau: "Models for Integrating Scheduling and Shop Floor Data Collection," Proceedings of The 16th IASTED International Conference, Innsbruck, Austria, February 17-19, 1997.

Lubell, Joshua

Joshua Lubell: "An XML Repository Architecture for STEP Modules," Proceedings of the World Automation Congress, Maui, Hawaii, June 11-16, 2000.

Craig Schlenoff, Michael Gruninger, Florence Tissot, John Valois, Joshua Lubell and Jintae Lee: "The Process Specification Language (PSL) Overview and Version 1.0 Specification," NISTIR 6459, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

Joshua Lubell and Craig Schlenoff: "Process Representation Using Architectural Forms: Accentuating the Positive," In Proceedings of the Markup Technologies '99 Conference, December, 1999.

Joshua Lubell: "Structured Markup on the Web: A Tale of Two Sites," Markup Languages: Theory and Practice, Vol. 1, Issue 3, September, 1999.

Joshua Lubell and David Sauder: "The EXPRESS Web Server," ACM Symposium on Applied Computing, February 28 - March 2, 1999.

Joshua Lubell: "SGML on the WEB: A Tale of Two Sites," Proceedings of SGML on the Web: A Tale of Two Sites, Washington, DC, December 8 - 11, 1997.

Joshua Lubell: "The Application Protocol Information Base World Wide Web Gateway," Proceedings of the 1997 ASME Design Engineering Technical Conference, Sacramento, California, September 14-17, 1997.

Joshua Lubell and Lisa Phillips: "SGML Application Development: Tradeoffs and Choices," Proceedings of the SGML'96 Conference, Boston MA, November 18-21, 1996.

Joshua Lubell: "The SC4 Short Names Registry," Sixth International EXPRESS User Group Conference, Toronto Canada, October, 1996.

Joshua Lubell: "The Application Protocol Information Base World Wide Web Gateway," NISTIR 5868, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Lisa Phillips and Joshua Lubell: "An SGML Environment for STEP," NISTIR 5515, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Luce, Mark

James Fowler and Mark Luce: "Systems Integration for Manufacturing Applications Program 1995 Annual Report," NISTIR 5839, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Clarence Johnson, Simon Frechette and Mark Luce: "The NIST SIMA Interactive Management Workshop," NISTIR 5717, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

James Fowler, Kevin Jurrens, Mark Luce and Howard Moncarz: "Testbed Requirements and Implementation Plan for the Rapid Response Manufacturing Intramural Project," NISTIR 5265, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Kevin Jurrens and Mark Luce: "Project Plan for the Rapid Response Manufacturing (RRM) Intramural Project," NISTIR 5174, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

M. K. Senehi, Sara Wallace and Mark Luce: "An Architecture for Manufacturing Systems Integration," Manufacturing International Conference, March, 1992.

D. Nau and Mark Luce: "Knowledge Representation and Reasoning Techniques for Process Planning: Extending SIPS to do Tool Selection," Proceedings of the 19th CIRP International Seminar on Manufacturing Systems, 1987.

Lyons, Kevin

D. Dutta, A.D. Bhatt, Kevin Jurrens, Kevin Lyons, Mike Pratt and Ram Sriram: "Representation of Heterogeneous Objects in ISO 10303 (STEP)," Proceedings of the ASME Conference, Orlando, FL, November 5-11, 2000.

Kevin Lyons, Ram Sriram, Rachuri Sudarsan and U. Roy: "Function-to-Form Mapping for Tolerance Synthesis: Part-II: Conceptual Design and Tolerance Synthesis," CAD/CAM Journal, August, 2000.

Kevin Lyons, Peter Hart, Steven Shooter and Walid Keirouz: "The Open Assembly Design Environment Project: An Architecture for Design Agent Interoperability," Proceedings of ASME Design Engineering Technical Conference, Las Vegas, NV, September 1998.

Kevin Lyons, Peter Hart, Sankar Jayaram, Yong Wang and Uma Jayaram: "A Virtual Assembly Design Environment," Proceedings of IEEE Virtual Reality '99 Conference, Houston, TX, March 13-17, 1999.

Rachuri Sudarsan, Yadati Narahari, Kevin Lyons, Michael Duffey and Ram Sriram: "Design for Tolerance of Electro-Mechanical Assemblies: An Integrated Approach," NISTIR 6223, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Rachuri Sudarsan, Y. Narahari, Kevin Lyons and Michael Duffey: "Design for Tolerance of Electro-Mechanical Assembles," Proceedings of IEEE International Conference on Robotics and Automation, Lueven, Belgium, May 1998.

Kevin Lyons, Scott Angster and Sankar Jayaram: Chapter 6: Virtual Environments for Design and Manufacture, Concurrent Engineering - The Agenda for Success, Res Studies Press Ltd., 1997.

Kevin Lyons, Venkat Rajan and Raj Sreerangam: "Representations and Methodologies for Assembly Modeling," NISTIR 6059, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Kevin Lyons: "Virtual Assembly Design Environment," Proceedings of the 15th ASME International Computers in Engineering (CIE95) Conference, Boston, MA, September, 1995.

Kevin Lyons and Michael Duffey: "Modeling the Product Realization Process: Requirements, Methods and Research Issues for Computer Support Tools," Proceedings of FAIM'95 (Flexible Automation and Intelligent Manufacturing), Stuttgart, Germany, June, 1995.

Kevin Lyons: "Product Realization Process Modeling: A Study of Requirements, Methods and Research Issues," NISTIR 5745, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Kevin Lyons: "Collaborative Design for Assembly of Complex Electro-Mechanical Products," Proceedings of NCMS Manufacturing Technology Complex Electro Mechanical Conference, Orlando, FL, May, 1995.

Kevin Lyons and Michael Duffey: "Requirements, Methods and Research Issues for Modeling the Product Realization Process," Proceedings of the IFIP Workshop - Working Group 5.7, Reengineering the Enterprise, Galway, Ireland, April, 1995.

Kevin Lyons and Peter Brown: "Design Engineering Research at NIST," NISTIR 5464, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

M

Manheimer, Kenneth

Kenneth Manheimer, B. Warsaw, Steve Clark and W. Rowe: "The Depot: A Framework for Sharing Software Installation Across Organizational & UNIX Platform Boundaries," Proceedings of the Fourth USENIX Large Installation Systems Administration (LISA), September, 1990.

Masters, Larry

Howard Bloom and Larry Masters: "The Technical Program of the Factory Automation Systems Division 1992," NISTIR 4856, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

McLay, Michael

Newton Breese, Micheal McLay and G. Silvernale: "Validation Testing Laboratory User's Guide," NISTIR 4683, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

K.C. Morris, Micheal McLay and Peter Carr: "Validation Testing System Requirements," NISTIR 4676, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Micheal McLay and K.C. Morris: "The NIST STEP Class Library STEP Into the Future," Proceedings of the C++ at Work '90 Conference, September, 1990.

McLean, Charles

Charles McLean and Frank Riddick: "The IMS Mission Architecture for Distributed Manufacturing Simulation," NISTIR 6559, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

Charles McLean and Frank Riddick: "The IMS Mission Architecture for Distributed Manufacturing Simulation," Proceedings of the 2000 Winter Simulation Conference, Orlando, FL, December 10-13, 2000.

Y. T. Lee, Swee Leong and Charles McLean: "Activity Model: Ship Repair and Conversion," NISTIR 6533, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

T. Neyhart, David Stieren, Greg Caskey and Charles McLean: "Knowledge-Based Modular Repair: Advanced Technology Applications for Ship Repair and Conversion," Proceedings of the Ship Production Symposium, May, 2000.

Charles McLean, Swee Leong and Frank Riddick: "Integration of Manufacturing Simulations Using High Level Architecture (HLA)," Proceedings of the 2000 Advanced Simulation Technologies Conference (ASTC 2000), March, 2000.

Charles McLean, Swee Leong and Frank Riddick: "Architecture for Modeling and Simulation of Global Distributed Enterprises," Proceedings of the ASIM 2000 Conference, February, 2000.

Rangan Krishnamurthy, Charles McLean and J.P. Shewchuk: "A Hybrid Manufacturing System Modeling Environment Using VRML," NISTIR Reprints, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Albert Jones and Charles McLean: "Industrial Need: Production Management Standards," NISTIR 6058, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Charles McLean and Swee Leong: "Industrial Need: Production System Engineering Integration," NISTIR 6019, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Edward Barkmeyer, Neil Christopher, Shaw Feng, James Fowler, Simon Frechette, Albert Jones, Kevin Jurrens, Charles McLean, Mike Pratt, Harry A. Scott, M. K. Senehi, Ram Sriram and Evan Wallace: "SIMA Reference Architecture Part I: Activity Models," NISTIR 5939, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Charles McLean and Swee Leong: "A Process Model for Product System Engineering," Proceedings of the IFIP WG 5.7 on Production Management Systems, Seattle, WA, September, 1995.

Charles McLean, Swee Leong and C. Chen: "Issues of Manufacturing Engineering Data Validation in Concurrent Engineering Environment," Proceedings of the IFIP WG 5.7 on Production Management Systems, Seattle, WA, September, 1995.

Charles McLean: "Computer-Aided Manufacturing System Engineering," Proceedings of the IFIP TC5/WG5.7 International Conference on Advances in Production Management Systems, APMS '93, September, 1993.

Charles McLean: "National PDES Testbed Implementation Plan: Management and Technical Support Activities," NISTIR 4647, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Charles McLean: "National PDES Testbed Strategic Plan 1990," NISTIR 4438, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Simon Frechette and Charles McLean: "System Requirements Analysis for the U.S. Army Rock Island Arsenal Tool Management System," NISTIR 4369, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Charles McLean and Peter Brown: "AMRF Process Planning System," Manufacturing Engineering Magazine, CIM Technology Supplement, August, 1987.

Charles McLean: "Interface Concepts for Plug-Compatible Production Management Systems," Proceedings of the IFIP WG5.7 Working Conference on Information Flow in Automated Manufacturing Systems, August, 1987.

Charles McLean and Peter Brown: "The Architecture of the NBS Factory Automation Research Testbed," Proceedings of the 10th IPAC World Congress, July, 1987.

J. Jun and Charles McLean: "Control of an Automated Machining Workstation," Proceedings of the American Control Conference, June, 1987.

Charles McLean: "A Cell Control Architecture for Flexible Manufacturing," Proceedings of the Advanced Manufacturing System Expo, June, 1987.

Peter Brown and Charles McLean: "Interactive Process Planning in the AMRF," Proceedings of the Symposium on Knowledge-Based Expert Systems for Manufacturing at ASME Winter Annual Meeting, December, 1986.

Charles McLean: "The Automated Manufacturing Research Facility at NBS," Proceedings of the IFIP W.G. 5.7 Working Conference on New Technologies for Production Management Systems, October, 1986.

Charles McLean: "The Vertical Machining Workstation of the AMRF: Software Integration," ASME Symposium on Intelligent and Integrated Manufacturing, September, 1986.

Charles McLean: "Research Tackles Automation Issues," Design News Magazine, July, 1986.

Charles McLean: "Information Architecture of the Automated Manufacturing Research Facility (AMRF)," Proceedings of the Information Technologies Conference, June, 1986.

Charles McLean and Carl Wenger: "The AMRF Material Handling System Architecture," Proceedings of the Fifth Annual Control Engineering Conference, May, 1986.

Albert Jones and Charles McLean: "A Proposed Hierarchical Control Model for Automated Manufacturing Systems," Journal of Manufacturing Systems, 1986.

Albert Jones and Charles McLean: "Production Control Module for the AMRF," Proceedings of the 1985 ASME Computers in Engineering Conference, August, 1985.

Charles McLean: "An Architecture for Intelligent Manufacturing Control," Proceedings of ASME Conference, August, 1985.

Albert Jones and Charles McLean: "A Cell Control System for the AMRF," Proceedings of the 1984 ASME International Computers in Engineering Conference, August, 1984.

J. Albus, A. Barbera, M. Fitzgerald, E. Kent, Charles McLean, H. McCain, Howard Bloom, L. Haynes, Cita Furlani, Edward Barkmeyer, Mary Mitchell, H. Scott, D. Blomquist and R. Kilmer: "A Control System for an Automated Manufacturing Research Facility," Society of Manufacturing Engineering, Robots 8, June, 1984.

Cita Furlani, E. Kent, Howard Bloom and Charles McLean: "The Automated Manufacturing Research Facility of the National Bureau of Standards," Proceedings of the Summer Computer Simulation Conference, July, 1983.

J. Albus, A. Barbera, Howard Bloom, M. Fitzgerald, E. Kent and Charles McLean: "Hierarchical Control for Robots in an Automated Factory," Proceedings of the 13th International Symposium on Industrial Robots, Robots 7, April, 1983.

Howard Bloom and Charles McLean: "Standardization Suggested by the AMRF--A Research Testbed of the Factory of the Future," Proceedings of the ASTM Symposium on Automated Manufacturing, April, 1983.

Charles McLean, Mary Mitchell and Edward Barkmeyer: "A Computer Architecture for Small Batch Manufacturing," IEEE Spectrum, 1983.

Howard Bloom, Charles McLean, Cita Furlani, T. Johnson, S. Milligan and T. Fortman: "Simulation of a Modular Hierarchical Feedback System," Proceedings of the 21st IEEE Conference on Decision and Control, December, 1982.

J. Albus, Charles McLean, A. Barbera and M. Fitzgerald: "An Architecture for Real-Time Sensory-Interactive Control of Robots in a Manufacturing Facility," Proceedings of the 4th International Federation of Automatic Control Symposium, October, 1982.

Charles McLean, Howard Bloom and Ted Hopp: "The Virtual Manufacturing Cell," Proceedings of the IFAC/IFIP Conference on Information Control Problems in Manufacturing Technology, October, 1982.

Mitchell, Mary

Mary Mitchell: "Capabilities for Product Data Exchange," Proceedings of the Intelligent Systems: A Semiotic Properspective Conference, Vol 2: Applied Semiotics, Jim Albus and Alex Mistel editors, 20-23 October 1996.

Mary Mitchell and William Gruttke: "Migration Plan for Product Data Standards," E-Com Magazine, 1996.

Howard Bloom, Sandra Ford and Mary Mitchell: "Standard for the Exchange of Product Model Data (STEP): Ready for Industry Implementation," Manufacturing Review Journal, Vol. 7, No. 4, December, 1994.

Mary Mitchell: "Initial NIST Testing Policy for STEP - Beta Testing Program for AP203 Implementation," NISTIR 5535, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

David Sauder, Mary Mitchell and Allison Barnard Feeney: "Challenges to the NII: The Barriers to Product Data Sharing," NISTIR 5498, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Mary Mitchell: "STEP Quality System: Action Plan and Assessment of Practices," NISTIR 5300, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

K.C. Morris, Mary Mitchell and Allison Barnard Feeney: "Validating STEP Application Models at the National PDES Testbed," NISTIR 5196, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Mary Mitchell: "AP Validation Workshop," NISTIR 5107, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

K.C. Morris, Mary Mitchell, C. Dabrowski and E. Fong: "Database Management Systems in Engineering," NISTIR 4976, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Mary Mitchell and K.C. Morris: "The Use of Application Model Validation in Testing a Proposed Standard," 1992 ASME Database Symposium, August, 1992.

K.C. Morris, Mary Mitchell and David Sauder: "Validating STEP Application Models at the National PDES Testbed," NISTIR 4735, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Mary Mitchell: "A Proposed Testing Methodology for STEP Application Protocol Validation," NISTIR 4684, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Mary Mitchell: "Testbed Development Plan: Validation and Testing System Development," NISTIR 4417, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Mary Mitchell, Y. Yang, S. Ryan and B. Martin: "Data Model Development and Validation for Product Data Exchange," NISTIR 4241, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Howard Bloom, Cita Furlani, Mary Mitchell and Joan Tyler: "Information Resource Dictionary System: An Integration and Mechanism for Product Data Exchange Specification," NISTIR 3862, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

Cita Furlani, Don Libes, Edward Barkmeyer and Mary Mitchell: "The Distributed Data System of the Automated Manufacturing Research Facility of the National Bureau of Standards," Proceedings of COMPCON SPRING `88, March, 1988.

Cita Furlani, Don Libes, Edward Barkmeyer and Mary Mitchell: "Distributed Databases on the Factory Floor," Proceedings of the First International Symposium on Computerization and Networking of Materials Property Databases, November, 1987.

V. Krishnamurthy, Stanley Su, H. Lam, Mary Mitchell and Edward Barkmeyer: "A Distributed Database Architecture for an Integrated Manufacturing Facility," Proceedings of the Conference on Data and Knowledge Systems for Engineering and Manufacturing,, October, 1987.

Edward Barkmeyer, Mary Mitchell, K. Mikkilineni, Stanley Su and H. Lam: "An Architecture for Distributed Data Management in Computer Integrated Manufacturing," NBS Internal Report 3312, National Bureau of Standards, Gaithersburg, MD, 1986.

J. Albus, A. Barbera, M. Fitzgerald, E. Kent, Charles McLean, H. McCain, Howard Bloom, L. Haynes, Cita Furlani, Edward Barkmeyer, Mary Mitchell, H. Scott, D. Blomquist and R. Kilmer: "A Control System for an Automated Manufacturing Research Facility," Society of Manufacturing Engineering, Robots 8, June, 1984.

Mary Mitchell and Edward Barkmeyer: "Data Distribution in the NBS Automated Manufacturing Research Facility," Proceedings of the IPAD II Conference, April, 1984.

Charles McLean, Mary Mitchell and Edward Barkmeyer: "A Computer Architecture for Small Batch Manufacturing," IEEE Spectrum, 1983.

Moncarz, Howard

Howard Moncarz: "A Context for Interoperability Standards for the Footwear Industry," NISTIR 6006, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Howard Moncarz: "CALS Technologies Make Business Sense for the Customer, Therapeutic Footwear Industry," Proceedings of the CALS Expo International Conference, Long Beach, CA, October, 1995.

Howard Moncarz: "Program Requirements to Advance the Technology of Custom Footwear Manufacturing," NISTIR 5521, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Howard Moncarz and Y. T. Lee: "CALS Technologies Applied to the Fiber/Textile/Apparel Industry," CALS/Enterprise Integration Journal, August, 1994.

Howard Moncarz: "Visualization Applications for Manufacturing A State-of-the-Art Survey," NISTIR 5427, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

James Fowler, Kevin Jurrens, Mark Luce and Howard Moncarz: "Testbed Requirements and Implementation Plan for the Rapid Response Manufacturing Intramural Project," NISTIR 5265, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Y. T. Lee and Howard Moncarz: "A Prototype Application Protocol for Ready-to-Wear Pattern Making," NISTIR 5115, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Howard Moncarz and Y. T. Lee: "Report of Scoping the Apparel Manufacturing Enterprise," Journal of Clothing Science Technologies, Volume 5, Number 3/4, 1993.

Howard Moncarz: "Information Technology Vision for the U.S. Fiber/Textile/Apparel Industry," NISTIR 4986, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Howard Moncarz and T. Murphy: "User's Guide for the Apparel STEP Translator for PC Compatible Computers," NISTIR 4745, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Howard Moncarz and Y. T. Lee: "Apparel STEP Translator," NISTIR 4612, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Howard Moncarz, Ted Hopp and P. Leazark: "Implementation of the Coordinate Measuring Machine Controller," NISTIR 3874, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

Howard Moncarz and T. Vorburger: "Implementation of the Surface Roughness Instrument (SRI) Controller," NISTIR 3794, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

Howard Moncarz: "Architecture & Principles of the Inspection Workstation," NBSIR 3802, National Bureau of Standards, Gaithersburg, MD, 1988.

Howard Moncarz: "Implementation of the Execution Control System of the Inspection Workstation," NBSIR 3787, National Bureau of Standards, Gaithersburg, MD, 1988.

Howard Moncarz, Steve Osella, B. Brochardt and R. Veale: "Operations Manual for the Inspection Workstation," NBSIR 3766, National Bureau of Standards, Gaithersburg, MD, 1988.

Howard Moncarz and T. Borchard: "Implementation of the Inspection Robot Controller," NBSIR 3772, National Bureau of Standards, Gaithersburg, MD, 1988.

Morris, KC

K.C. Morris and David Flater: "Design of a Flexible, Integrated Testing System for STEP and OMG Standards," Computer Standards and Interfaces, 2000, v. 22, n. 5, February, 2000, 297-305.

K.C. Morris: "Improving PDM Testability Through Standards Harmonization," Proceedings of the Product Data Technology Europe 2000 Conference, February, 2000.

David Flater and K.C. Morris: "Testability of Product Data Management Interfaces," NISTIR 6429, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

K.C. Morris and David Flater: "Standards-Based Software Testing in a Net-Centric World," In Proceedings of the Ninth International Workshop on Software Technology and Engineering Practice (STEP '99), Pittsburgh, Pennsylvania, IEEE Computer Society, September 1999, 115-122.

K.C. Morris, David Flater, Don Libes and Albert Jones: "Testing of Interaction-driven Manufacturing Systems," NISTIR 6260, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Martin Hardwick, K.C. Morris, David L. Spooner, Tom Rando and Peter Denno: "Lessons Learned Developing Protocols for the Industrial Virtual Enterprise," (To appear in) The Journal of Computer-Aided Design, October, 1998.

K.C. Morris: "Position Paper for "Workshop on Application Integration Architectures," Workshop on Application Integration Architectures Dallas, TX, 1996.

K.C. Morris, M. Hardwick, D. Spooner and T. Rando: "Sharing Manufacturing Information between Heterogeneous Corporations," Special Issue of the Communications of the ACM, September 1995, 1996.

K.C. Morris: Computing Standards Adopted by the NIIIP, National Industrial Information Infrastructure Protocols Reference Architecture, 1995, Chapter 19.

David Sauder and K.C. Morris: "Design of a C++ Software Library for Implementing EXPRESS: The NIST Step Class Library," EXPRESS User Group, October, 1995.

K.C. Morris: "Data Probe: A Tool for EXPRESS-based Data," proceedings of the 7th Annual Engineering Database Symposium - ASME Computers in Engineering Conference, August, 1993.

K.C. Morris, Mary Mitchell and Allison Barnard Feeney: "Validating STEP Application Models at the National PDES Testbed," NISTIR 5196, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

K.C. Morris: "Position paper for Workshop on Application Integration Architectures," NISTIR 5326, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

K.C. Morris, Mary Mitchell, C. Dabrowski and E. Fong: "Database Management Systems in Engineering," NISTIR 4976, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

K.C. Morris, David Sauder and Sandy Ressler: "Validation Testing System Reusable Software Component Design," NISTIR 4937, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Tom Kramer, K.C. Morris and David Sauder: "A Structural EXPRESS Editor," NISTIR 4903, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Mary Mitchell and K.C. Morris: "The Use of Application Model Validation in Testing a Proposed Standard," 1992 ASME Database Symposium, August, 1992.

K.C. Morris: "Architecture for the Validation Testing System Software," NISTIR 4742, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

K.C. Morris, Mary Mitchell and David Sauder: "Validating STEP Application Models at the National PDES Testbed," NISTIR 4735, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

K.C. Morris, Micheal McLay and Peter Carr: "Validation Testing System Requirements," NISTIR 4676, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Micheal McLay and K.C. Morris: "The NIST STEP Class Library STEP Into the Future," Proceedings of the C++ at Work '90 Conference, September, 1990.

K.C. Morris: "Translating Express to SQL: A User's Guide," NISTIR 4341, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

N

Nell, James

C. Parks and James Nell: "Internet Commerce for Manufacturing Data Staging," NISTIR 6578, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

C. Parks, Edward Barkmeyer and James Nell: "Internet Commerce for Manufacturing Activity Model," NISTIR 6516, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

Neil Christopher and James Nell: "Standards Classification Strategy and Methodology," NISTIR 6409, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

Neil Christopher and James Nell: "Criteria Analysis," NISTIR 6408, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

James Nell: "Standardization and Enterprise Integration," NISTIR 6049, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

James Nell: Enterprise Representation: An Analysis of Standards Issues, "Modeling & Methodologies for Enterprise Integration", Chipman & Hall, London UK on behalf of the International Federation of Information Processing (IFIPS-TC5), 1995.

Nickerson, Debbie

Debbie Nickerson: "The NIST SQL Database Loader: STEP Working Form to SQL," NISTIR 4337, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Debbie Nickerson: "Integrated Manufacturing Data Administration System (IMDAS) Operations Manual," NBSIR 3743, National Bureau of Standards, Gaithersburg, MD, 1988.

O

Osella, Steve

Steve Osella: "Expert Control System Shell Version 1.0 User's Guide," NISTIR 5601, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

S. Ridder, Steve Osella, P. Espina and F. Biancaniello: "Intelligent Control of Particle Size Distribution During Gas Atomization," International Journal of Powder Metallurgy, 1992.

Steve Osella, S. Ridder, F. Biancaniello and P. Espina: "The Intelligent Control of an Inert-Gas Atomization Process," The Journal of the Minerals Metals & Materials Society (JOM), January, 1991.

Steve Osella, P. Espina and F. Biancaniello: "Development of Adaptive Control Strategies For Inert Gas Atomization," Intelligent Processing of Materials, ed. H. P. Wang, ASME, 1991.

Steve Osella, P. Espina and F. Biancaniello: "Process Modeling and Control of Inert Gas Atomization," Proceedings of the First Thermal Structures Conference, 1991.

S. Ridder, Steve Osella, P. Espina and F. Biancaniello: "Advanced Sensors and Process Control for Gas Atomization," Advances in Powder Metallurgy, 1991.

S. Ridder, Steve Osella, P. Espina and F. Biancaniello: "Sensors and Process Control in Gas Atomization," Advanced Sensing, Modelling, and Control of Materials Processing, 1991.

Steve Osella: "Collective Learning Systems for Automatic Control," ASM/TMS Symposium on Intelligent Processing of Materials, October, 1990.

Steve Osella and T. Murphy: "Real-time Particle Size Distribution Classification using a Neural Network," ASM/TMS Symposium on Intelligent Processing of Materials, October, 1990.

S. Ridder, Steve Osella, P. Espina and F. Biancaniello: Process Diagnostics, Modeling, and Control For Inert Gas Atomization, Intelligent Processing of Materials, ed H. N. G. Wadley and W. E. Eckhart, Jr., (Warrendale, PA: TMS, 1990), 1990, 41-53.

Steve Osella: "Collective Learning Systems: A Model for Automatic Control," Proceedings of the 4th International Symposia for Intelligent Control, October, 1989.

Steve Osella: "Implementation of the Inspection Workstation Controller," NBSIR 3819, National Bureau of Standards, Gaithersburg, MD, 1988.

Howard Moncarz, Steve Osella, B. Brochardt and R. Veale: "Operations Manual for the Inspection Workstation," NBSIR 3766, National Bureau of Standards, Gaithersburg, MD, 1988.

P

Pawlak, C.

C. Pawlak: "A Survey of Standards for the U.S. Fiber/Textile/Apparel Industry," NISTIR 5823, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Cathleen Diaz and C. Pawlak: "User's Guide for the Algorithm Testing System/Version 1.1," NISTIR 5137, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Phillips, Lisa

Joshua Lubell and Lisa Phillips: "SGML Application Development: Tradeoffs and Choices," Proceedings of the SGML'96 Conference, Boston MA, November 18-21, 1996.

Lisa Phillips and Joshua Lubell: "An SGML Environment for STEP," NISTIR 5515, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Pratt, Mike

Ram Sriram, Mike Pratt, Shaw Feng and E.Y. Song: "Information Modeling on Conceptual Design Integrated with Process Planning," Recent Advances in Design for Manufacture, DE-Vol.109, the Proceedings of the 2000 International Mechanical Engineering Congress and Exposition, November, 2000, 123-130.

Mike Pratt and B.D. Anderson: "A Shape Modeling Application Program Interface (API) for the STEP Standard," Computer Aided Design Journal - European, November, 2000.

D. Dutta, A.D. Bhatt, Kevin Jurrens, Kevin Lyons, Mike Pratt and Ram Sriram: "Representation of Heterogeneous Objects in ISO 10303 (STEP)," Proceedings of the ASME Conference, Orlando, FL, November 5-11, 2000.

Mike Pratt: "Introduction to ISO 10303 - The STEP Standard for Product Data Exchange," ASME Journal of Computing and Information Science in Engineering, November, 2000.

Jung-Hyun Han, Mike Pratt and William Regli: "Manufacturing Feature Recognition from Solid Models: A Status Report," IEEE Trans. on Robotics and Automation (2000), June, 2000.

D. Dutta, V. Kumar, Mike Pratt and Ram Sriram: "Towards STEP-Based Data Transfer in Layered Manufacturing," Proceedings of the 10th IFIP WG5.2/5.3 PROLAMAT Conference [Kluwer Academic Publishers, 1998], Trento, Italy, September 1998.

Mike Pratt: "Extension of the Standards ISO 10303 (STEP) for the Exchange of Parametric and Variational CAD Models," Proceedings of the 10th IFIP WG5.2/5.3 PROLAMAT Conference [Kluwer Academic Publishers, 1998], Trento, Italy, September 1998.

Mike Pratt, Anne L. Marsan, Vinod Kumar and Debasish Dutta: "An Assessment of Data Requirements and Data Transfer Formats for Layered Manufacturing," NISTIR 6216, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Mike Pratt: Quartic Supercyclides I: Basic Theory, Published in Computer Aided Geometric Design, North-Holland Publishing Co., Volume 14, No. 7, 1997, 671 - 692.

Edward Barkmeyer, Neil Christopher, Shaw Feng, James Fowler, Simon Frechette, Albert Jones, Kevin Jurrens, Charles McLean, Mike Pratt, Harry A. Scott, M. K. Senehi, Ram Sriram and Evan Wallace: "SIMA Reference Architecture Part I: Activity Models," NISTIR 5939, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

William Regli and Mike Pratt: "What are Feature Interactions?," Proceedings of the ASME Computers in Engineering Conference [American Society of Mechanical Engineers, 1996], Irvine, CA, September, 1996.

Mike Pratt: "Extension of STEP for the Representation of Parametric and Variational Models," Presented at workshop on CAD Tools for Products [D. Roller & P. Brunet (eds.) 'CAD Systems Development' Springer-Verlag, 1997], Schloss, Germany, September, 1995..

Edward Barkmeyer, Ted Hopp, Mike Pratt and Gaylen Rinaudot: "Background Study: Requisite Elements, Rationale, and Technology Overview for the Systems Integration for Manufacturing Applications (SIMA) Program," NISTIR 5662, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Mike Pratt: "Product Models and Virtual Prototypes in Mechanical Engineering," NISTIR 5650, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Q

R

Rao, P.V.M.

Robert H. Allen, Srinivas Nidamarthi, P.V.M. Rao, R. Rhorer, Ram Sriram and E. C. Teague: "Collaborating on the Design and Manufacture of an Atomic Artifact Transport System: A Case Study in VRML as a Visualization Tool for Consensus Building," Proceedings of ASME Proceedings of the 1998 Design Automation Conference, Atlanta, Georgia, September 13-16, 1998.

Ray, Steven

Amy Knutilla, Craig Schlenoff and Steven Ray: "An Anaylis of Requirements for Specifying Manufacturing Engineering and Business Processes," NISTIR 6364, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Amy Knutilla, Craig Schlenoff, Steven Ray, Stephen T. Polyak, Austin Tate, Shu Chiun Cheah and Richard C. Anderson: "Process Specification Language: An Analysis of Existing Representations," NISTIR 6160, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Venkat Allada, Shaw Feng and Steven Ray: "Development of a Message Model to Support Integrated Design and Manufacturing," Proceedings of International Conference on Industrial Engineering Applications & Practice, San Diego, CA, November 12-15, 1997.

Craig Schlenoff, Amy Knutilla and Steven Ray: "Proceedings of the First Process Specification Language (PSL) Roundtable," NISTIR 6081, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Craig Schlenoff, Amy Knutilla and Steven Ray: "Requirements for Modeling Manufacturing Process: A New Perspective," Proceedings of Design Engineering Conferences, Sacremento, CA, September 1997.

Craig Schlenoff, Amy Knutilla and Steven Ray: "Unified Process Specification Language: Requirements for Modeling Process," NISTIR 5910, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Shaw Feng, C. Zhang and Steven Ray: "An Architecture of Component - Based CAPP Systems for Agile Manufacturing," Proceedings of the 1996 NSF Design and Manufacturing Grantees Conference, Albuquerque, NM, February, 1996.

M. K. Senehi, Tom Kramer, J. Michaloski, R. Quintero, Steven Ray, W. Rippey and Sara Wallace: "Reference Architecture for Machine Control Systems Integration: Interim Report," NISTIR 5517, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Mary Beth Algeo, Shaw Feng and Steven Ray: "A State-of-the-Art Survey on Product Design and Process Planning Integration Mechanisms," NISTIR 5548, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

S. Huang, J. Mei, H. Zhang and Steven Ray: "IPPS: An Integrated Process Planning System," Society of Manufacturing Engineers (SME), 22nd North American Manufacturing Research Conference, 1994.

Steven Ray: "Proceedings of the 1993 Industrial Process Planning Workshop," NISTIR 5284, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Sara Wallace, M. K. Senehi, Edward Barkmeyer, Steven Ray and Evan Wallace: "Manufacturing Systems Integration Control Entity Interface Specification," NISTIR 5272, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Steven Ray and Allison Barnard: "A National Testbed for Process Planning Research," NISTIR 5169, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Steven Ray: "Usinf the ALPS Process Plan Model," Proceedings of the ASME Manufacturing International Conference, March, 1992.

Steven Ray and M. K. Senehi: "Data Map Workshop for Manufacturing Data," NISTIR 5160, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

M. K. Senehi, Edward Barkmeyer, Steven Ray and Evan Wallace: "Manufacturing Systems Integration Initial Architecture Document," NISTIR 4682, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

M. K. Senehi, Sara Wallace, Evan Wallace, Steven Ray and Edward Barkmeyer: "Manufacturing Systems Integration Control Entity Interface Document," NISTIR 4626, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Brian Catron and Steven Ray: "ALPS: A Language for Process Specification," The Journal of Computer Integrated Manufacturing, 1991.

Steven Ray: "A Modular Process Planning System Architecture," Proceedings of the 1989 IIE Integrated Systems Conference, November, 1989.

Peter Brown and Steven Ray: "NBS AMRF Process Planning System--System Architecture," NISTIR 3828, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

Steven Ray: "Process Reasoning," Proceedings of the IFIP WG5.7 Working Conference on Information Flow in Automated Manufacturing Systems, August, 1987.

Peter Brown and Steven Ray: "Research Issues in Process Planning at the National Bureau of Standards," Proceedings of the 19th CIRP International Seminar on Manufacturing Systems, 1987.

Steven Ray: "A Knowledge Representation Scheme for Processes in an Automated Manufacturing Environment," Proceedings of the 1986 IEEE International Conference on Systems Manufacturing and Cybernetics, October, 1986.

Read, Michael

Michael Read: "Apparel Manufacturing Glossary for Application Protocol Development," NISTIR 5572, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Regli, William

Jung-Hyun Han, Mike Pratt and William Regli: "Manufacturing Feature Recognition from Solid Models: A Status Report," IEEE Trans. on Robotics and Automation (2000), June, 2000.

Mike Smith, Swee Leong and William Regli: "NIST Manufacturing Process Planning and CAME Forum Workshop," NISTIR 6142, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Simon Szykman and William Regli: "Network-Centric CAD: A Research Planning Workshop," Proceedings of Network-Centric CAD: A Research Planning Workshop, Gaithersburg, Maryland, December 3-4, 1996.

William Regli: "Feature-Based Similarity Assessment of Solid Models," Proceedings of ACM Solid Modeling Conference, Atlanta, GA, May 14-16, 1997.

William Regli and Daniel M. Gains: "A Repository of Designs for Process and Assembly Planning," NISTIR 5982, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

William Regli and Daniel M. Gaines: "A National Repository for Design and Process Planning," Proceedings of the National Science Foundation Design and Manufacturing Grantees Conference, Seattle, WA, January 6-9, 1997.

William Regli: "Internet-Enabled Computer-Aided Design," IEEE Internet Computing, Vol. 1, Number 1, pp.39-51, 1997.

William Regli and Mike Pratt: "What are Feature Interactions?," Proceedings of the ASME Computers in Engineering Conference [American Society of Mechanical Engineers, 1996], Irvine, CA, September, 1996.

William Regli: "Automated Manufacturability Analysis: A Survey," NISTIR 5713, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

William Regli, S. Gupta and D. Nau: "Feature Recognition for Interactive Applications: Exploring Distributed Resources," NISTIR 5706, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

William Regli, S. Gupta and D. Nau: "Manufacturing Features Instances: Which ones to Recognize?," NISTIR 5655, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Ressler, Sandy

K.C. Morris, David Sauder and Sandy Ressler: "Validation Testing System Reusable Software Component Design," NISTIR 4937, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Sandy Ressler: "Experiences with Heterogeneous-Platform CD-ROM's," Proceedings of the Advanced Information Interfaces: Making Data Accessible Conference, June, 1991.

Sandy Ressler: "The National PDES Testbed Mail Server User's Guide," NISTIR 4508, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Sandy Ressler: "An Overview of the Product Data Hyperstandard CD-ROM Prototype," NISTIR 4470, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Sandy Ressler and Susan Katz: "Development Plan: Configuration Management Systems and Services," NISTIR 4413, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Sandy Ressler and Steve Clark: "VOILA: A System for Looking at Processes," NISTIR 4196, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Sandy Ressler: "Tile Tool: A Graphical Interface for the Exploration of Generalized Penrose Tilings," NBSIR 3488, National Bureau of Standards, Gaithersburg, MD, 1989.

Sandy Ressler: "The Hyperstandard: Applying Hypertext Technology to Standards Development, Dissemination and Implementation," NISTIR 3859, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

Y. T. Lee and Sandy Ressler: "Converting the AMRF Part Model Report to a PDES/STEP Subset," NBSIR 3818, National Bureau of Standards, Gaithersburg, MD, 1988.

J. Kirsch, Russell Kirsch and Sandy Ressler: "Computers Viewing Artists at Work," Proceedings of Syntactic and Structural Pattern Recognition, March, 1987.

Sandy Ressler: "Using the AMRF Part Model Report," NBS Internal Report 3531, National Bureau of Standards, Gaithersburg, MD, 1987.

Sandy Ressler: "The Incrementor: A Graphical Technique for Manipulating Parameters," ACM Transactions on Graphics, January, 1987.

Steve Clark and Sandy Ressler: "The Geometry Modeling System User's Guide," NBS Internal Report 3508, National Bureau of Standards, Gaithersburg, MD, 1986.

Riddick, Frank

Charles McLean and Frank Riddick: "The IMS Mission Architecture for Distributed Manufacturing Simulation," NISTIR 6559, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

Frank Riddick and C. Lecapitaine: "The Evolution of Prototype Architectures Developed for the Scheduling Software Integration Project," NISTIR 6548, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

Charles McLean and Frank Riddick: "The IMS Mission Architecture for Distributed Manufacturing Simulation," Proceedings of the 2000 Winter Simulation Conference, Orlando, FL, December 10-13, 2000.

Charles McLean, Swee Leong and Frank Riddick: "Integration of Manufacturing Simulations Using High Level Architecture (HLA)," Proceedings of the 2000 Advanced Simulation Technologies Conference (ASTC 2000), March, 2000.

Charles McLean, Swee Leong and Frank Riddick: "Architecture for Modeling and Simulation of Global Distributed Enterprises," Proceedings of the ASIM 2000 Conference, February, 2000.

Frank Riddick: "Reactive Scheduling System Implementations Using a Simulated Shop Floor," none, July, 1998.

Frank Riddick: "Using Simulation as a Proxy for a Real Shop Floor and Data Collection System," NISTIR 6173, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Christophe Lecapitaine, Frank Riddick and Albert Jones: "IMES II - Production Management Standards: Requirements Analysis for Shop Floor Status," NISTIR 6123, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Frank Riddick and Anuk M. Loureau: "Models for Integrating Scheduling and Shop Floor Data Collection," Proceedings of The 16th IASTED International Conference, Innsbruck, Austria, February 17-19, 1997.

Frank Riddick, A.W. Brown and R. P. Judd: "Architectural Issues in the Design and Implementation of an Integrated Toolkit for Manufacturing Engineering," International Journal of Computer-Integrated Manufacturing, May, 1996.

Albert Jones, Frank Riddick and L. Rabelo: "Development of a Predictive-Reactive Scheduler using Genetic Algorithms and Simulation-based Scheduling Software," AMPST 96, April, 1996.

Rinaudot, Gaylen

Edward Barkmeyer, Ted Hopp, Mike Pratt and Gaylen Rinaudot: "Background Study: Requisite Elements, Rationale, and Technology Overview for the Systems Integration for Manufacturing Applications (SIMA) Program," NISTIR 5662, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Gaylen Rinaudot: "STEP On-Line Information Service (SOLIS)," NISTIR 5511, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Rosenfeld, David

David Rosenfeld and S. Dhar: "Procedure for Product Data Exchange Using STEP Developed in the AutoSTEP Pilot," NISTIR 5833, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

David Rosenfeld: "Reference Manual for the Algorithm Testing System Version 2.0," NISTIR 5722, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

David Rosenfeld: "User's Guide for the Algorithm Testing System Version 2.0," NISTIR 5674, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Rybczynski, Siefried

Siefried Rybczynski: "Common Memory for the Personal Computer," NISTIR 3838, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

Siefried Rybczynski, Edward Barkmeyer, Evan Wallace, M. Strawbridge, Don Libes and C. Young: "AMRF Network Communications," NBSIR 3816, National Bureau of Standards, Gaithersburg, MD, 1988.

S

Sauder, David

Joshua Lubell and David Sauder: "The EXPRESS Web Server," ACM Symposium on Applied Computing, February 28 - March 2, 1999.

David Sauder and K.C. Morris: "Design of a C++ Software Library for Implementing EXPRESS: The NIST Step Class Library," EXPRESS User Group, October, 1995.

David Sauder, Mary Mitchell and Allison Barnard Feeney: "Challenges to the NII: The Barriers to Product Data Sharing," NISTIR 5498, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

David Sauder: "Data Probe Users Guide," NISTIR 5141, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

K.C. Morris, David Sauder and Sandy Ressler: "Validation Testing System Reusable Software Component Design," NISTIR 4937, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

Tom Kramer, K.C. Morris and David Sauder: "A Structural EXPRESS Editor," NISTIR 4903, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

K.C. Morris, Mary Mitchell and David Sauder: "Validating STEP Application Models at the National PDES Testbed," NISTIR 4735, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Schlenoff, Craig

Craig Schlenoff, Michael Gruninger, Florence Tissot, John Valois, Joshua Lubell and Jintae Lee: "The Process Specification Language (PSL) Overview and Version 1.0 Specification," NISTIR 6459, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

Craig Schlenoff, Peter Denno, Robert Ivester and Simon Szykman: "An Analysis of Existing Ontological Systems for Applications in Manufacturing," Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.14, No.4, January, 2000, 257-270.

Joshua Lubell and Craig Schlenoff: "Process Representation Using Architectural Forms: Accentuating the Positive," In Proceedings of the Markup Technologies '99 Conference, December, 1999.

Craig Schlenoff, Michael Gruninger, Mihai Ciocoiu and Don Libes: "Process Specification Language (PSL): Results of the First Pilot Implementation," (To appear in) ASME International Mechanical Engineering Congress and Exposition, October, 1999.

Craig Schlenoff: "The Essence of the Process Specification Language," (To appear in) Transactions of the Society for Computer Simulation International, August, 1999.

Craig Schlenoff: "Second Process Specification Language (PSL) Roundtable," NIST Journal of Research, April, 1999.

Craig Schlenoff, Robert Ivester, Don Libes, Peter Denno and Simon Szykman: "An Analysis of Existing Ontological Systems for Applications in Manufacturing and Healthcare," NISTIR 6301, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

Amy Knutilla, Craig Schlenoff and Steven Ray: "An Anaylis of Requirements for Specifying Manufacturing Engineering and Business Processes," NISTIR 6364, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Amy Knutilla, Craig Schlenoff and Robert Ivester: "A Robust Ontology for Manufacturing Systems Integration," Proceedings of 2nd International Conference on Engineering Design and Automation, Maui, Hawaii, August 7-14, 1998.

Amy Knutilla, Craig Schlenoff, Steven Ray, Stephen T. Polyak, Austin Tate, Shu Chiun Cheah and Richard C. Anderson: "Process Specification Language: An Analysis of Existing Representations," NISTIR 6160, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Craig Schlenoff, Amy Knutilla and Steven Ray: "Proceedings of the First Process Specification Language (PSL) Roundtable," NISTIR 6081, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Craig Schlenoff, Amy Knutilla and Steven Ray: "Requirements for Modeling Manufacturing Process: A New Perspective," Proceedings of Design Engineering Conferences, Sacremento, CA, September 1997.

Michael Gruninger, Craig Schlenoff and Amy Knutilla: "Using Process Requirements as the Basis for the Creation and Evaluation of Process Ontologies for Enterprise Modeling," ACM SIGGROUP Bulletin, Vol. 18, No. 3, August, 1997.

Craig Schlenoff, Amy Knutilla and Steven Ray: "Unified Process Specification Language: Requirements for Modeling Process," NISTIR 5910, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Craig Schlenoff: "World Wide Web and Mosaic: User's Guide," NISTIR 5453, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Senehi, M. K.

Edward Barkmeyer, Neil Christopher, Shaw Feng, James Fowler, Simon Frechette, Albert Jones, Kevin Jurrens, Charles McLean, Mike Pratt, Harry A. Scott, M. K. Senehi, Ram Sriram and Evan Wallace: "SIMA Reference Architecture Part I: Activity Models," NISTIR 5939, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

M. K. Senehi and R. Kramer: "A Framework for Control Architecture," International Journal of Computer Integrated Manufacturing, Taylor and Francis Publishing, London and New York, July, 1996.

M. K. Senehi, Tom Kramer, J. Michaloski, R. Quintero, Steven Ray, W. Rippey and Sara Wallace: "Reference Architecture for Machine Control Systems Integration: Interim Report," NISTIR 5517, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Tom Kramer and M. K. Senehi: "Feasibility Study: Reference Architecture for Machine Control Systems Integration," NISTIR 5297, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

Sara Wallace, M. K. Senehi, Edward Barkmeyer, Steven Ray and Evan Wallace: "Manufacturing Systems Integration Control Entity Interface Specification," NISTIR 5272, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

M. K. Senehi, Sara Wallace and Mark Luce: "An Architecture for Manufacturing Systems Integration," Manufacturing International Conference, March, 1992.

Steven Ray and M. K. Senehi: "Data Map Workshop for Manufacturing Data," NISTIR 5160, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

M. K. Senehi, Edward Barkmeyer, Steven Ray and Evan Wallace: "Manufacturing Systems Integration Initial Architecture Document," NISTIR 4682, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

M. K. Senehi, Sara Wallace, Evan Wallace, Steven Ray and Edward Barkmeyer: "Manufacturing Systems Integration Control Entity Interface Document," NISTIR 4626, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Smith, Bradford

Joan Wellington and Bradford Smith: "ISO TC 184/SC4 Reference Manual," NISTIR 5665, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Bradford Smith: "External Representation of Product Definition Data," NISTIR 4166, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Bradford Smith: "PRODUCT DATA EXCHANGE: The PDES Project--Status and Objectives," NISTIR 4165, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

Sriram, Ram

Ram Sriram, Mike Pratt, Shaw Feng and E.Y. Song: "Information Modeling on Conceptual Design Integrated with Process Planning," Recent Advances in Design for Manufacture, DE-Vol.109, the Proceedings of the 2000 International Mechanical Engineering Congress and Exposition, November, 2000, 123-130.

D. Dutta, A.D. Bhatt, Kevin Jurrens, Kevin Lyons, Mike Pratt and Ram Sriram: "Representation of Heterogeneous Objects in ISO 10303 (STEP)," Proceedings of the ASME Conference, Orlando, FL, November 5-11, 2000.

Robert Allen and Ram Sriram: "Environmental Issues in Collaborative Design," Mechanical Life Cycle Handbook, September, 2000.

Kevin Lyons, Ram Sriram, Rachuri Sudarsan and U. Roy: "Function-to-Form Mapping for Tolerance Synthesis: Part-II: Conceptual Design and Tolerance Synthesis," CAD/CAM Journal, August, 2000.

Robert Allen, Ram Sriram, Simon Szykman and R. J. Fijol: "Representing an Artifact Transport System in a Design Repository: A Case Study," Proceedings of the ASME Design Engineering Technical Conference & Computers & Information in Engineering Conference, August, 2000.

Simon Szykman, Christophe Bochenek, J. W. Racz and Ram Sriram: "Design Repositories: Next-Generation Engineering Design Databases," IEEE Intelligent Systems and Their Applications, January, 2000.

Simon Szykman, Janusz Racz, Christophe Snowden and Ram Sriram: "Web-Based System for Design Artifact Modeling," Journal of Design Studies, January, 2000.

Robert Allen and Ram Sriram: "The Role of Standards in Innovation," Technological Forecasting and Social Change, Volume 64, January, 2000, 171-181.

Robert Allen, S. Nidamarthi, S. Regalla and Ram Sriram: "Enhancing Collaboration using an Internet Integrated Workbench," In Proceedings of the 1999 ASME Design Engineering Technical Conferences, Paper No. DETC99/DAC-8573, Las Vegas, Nevada, September 12-15, 1999..

Robert Allen, Ram Sriram, Srinivas Nidamarthi and Srinivasa P. Regalla: "Observations from Multidisciplinary, Internet-Based Collaboration on a Practical Design Project," In Proceedings of the International Conference on Engineering Design, ICED '99, Munich, August 1999..

Simon Sykman, Ram Sriram and Janusz Racz: "The Representation of Function in Computer-Based Design," In Proceedings of the 1999 ASME Design Engineering Technical Conferences (11th International Conference on Design Theory and Methodology), Paper No. DETC99/DTM-8742, Las Vegas, Nevada, September 1999..

Simon Sykman, Ram Sriram and J. Senfaute: "The Use of XML to Describe Function and Taxonomies in Computer-based Design," In Proceedings of the 1999 ASME Design Engineering Technical Conferences (11th International Conference on Design Theory and Methodology), Paper No. DETC99/CIE-9025, Las Vegas, Nevada, September 1999..

D. Dutta, V. Kumar, Mike Pratt and Ram Sriram: "Towards STEP-Based Data Transfer in Layered Manufacturing," Proceedings of the 10th IFIP WG5.2/5.3 PROLAMAT Conference [Kluwer Academic Publishers, 1998], Trento, Italy, September 1998.

Rachuri Sudarsan, Yadati Narahari, Kevin Lyons, Michael Duffey and Ram Sriram: "Design for Tolerance of Electro-Mechanical Assemblies: An Integrated Approach," NISTIR 6223, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Walter Nederbragt, Robert Allen, Shaw Feng, Serge Kaing, Ram Sriram and Yuyun Zhang: "The NIST Design/Process Planning Integration Project," Proceedings of Advanced Technology & Manufacturing: State-of-the-Art & State of Practice Workshop Workshop Proceedings, Atlanta, GA, August 31, 1998 - September 2, 1998.

Robert H. Allen, Srinivas Nidamarthi, P.V.M. Rao, R. Rhorer, Ram Sriram and E. C. Teague: "Collaborating on the Design and Manufacture of an Atomic Artifact Transport System: A Case Study in VRML as a Visualization Tool for Consensus Building," Proceedings of ASME Proceedings of the 1998 Design Automation Conference, Atlanta, Georgia, September 13-16, 1998.

Simon Szykman, Ram Sriram, Christophe Bochenek and Janusz Racz: "The NIST Design Repository Project," Advances in Soft Computing - Engineering Design and Manufacturing, Roy, R., T. Furuhashi and P. K. Chawdhry (eds.), Springer-Verlag, London, 1999., July, 1998, pp.5-19.

Ram Sriram, S.R. Gorti, A. Gupta, Gerard Kim and A. Wong: "An Object-Oriented Representation for Product and Design Processes," Journal of CAD, Volume 30, No. 7, April, 1998, 489 - 501.

Simon Szykman and Ram Sriram: "Internet-Based Delivery of CAD/CAM Capability: An Industry Case Study," Proceedings of the 1998 ASME Design Engineering Technical Conferences (18th Computers in Engineering Conference), Paper No. DETC98/CIE-5520, Atlant, GA, September, 1998, Vol. 120, No. 1.

J. William Murdock, Simon Szykman and Ram Sriram: "An Information Modeling Framework to Support Design Databases and Repositories," Proceedings of the 1997 ASME Design Engineering Technical Conferences (Design for Manufacturing Conference), Paper No. DETC97/DFM-4373, Sacremento, CA, September, 1997.

Edward Barkmeyer, Neil Christopher, Shaw Feng, James Fowler, Simon Frechette, Albert Jones, Kevin Jurrens, Charles McLean, Mike Pratt, Harry A. Scott, M. K. Senehi, Ram Sriram and Evan Wallace: "SIMA Reference Architecture Part I: Activity Models," NISTIR 5939, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

S. Gorti and Ram Sriram: "From Symbol to Form: A Framework for Conceptual Design," Journal of Computer-Aided Design, 1997.

Gerard Kim, Gorti, S.R., Gupta, A., Wong, A. and Ram Sriram: "An Object-oriented Representation of Product and Design," Journal of Computer Aided Design, August, 1996.

Ram Sriram: "Overview and Vision of the NIST Engineering Design Technologies Group," NISTIR 5827, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Start, Chuck

Chuck Stark: "Application Protocols for Mechanical Parts Production Plan," NISTIR 4628, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Steves, Michelle Potts

Michelle Potts Steves and E.L. Morse: "Mining Usability Information from Log Files: A Multi-Pronged Approach," Electronic Publication, November, 2000.

Michelle Potts Steves and E. L. Morse: "A Visualization Approach to Dealing with Log Data," World Wide Web, November, 2000.

Michelle Potts Steves, M. Ranganathan and E.L. Morse: "SMAT: Synchronous Multimedia and Annotation Tool," Proceedings of the International Conference on System Science, September, 2000.

Michelle Potts Steves and E.L. Morse: "CollabLogger: A Tool for Visualizing Groups at Work," Proceedings of the IEEE Workshop on Enabling Technologies: Infrastructure for Collaborative Enterprises, August, 2000.

Robert Allen, Amy Knutilla and Michelle Potts Steves: "Workshop on Evaluating Collaborative Enterprises - Workshop Report," Proceedings of the IEEE Workshop on Enabling Technologies: Infrastructure for Collaborative Enterprises (WETICE), Gaithersburg, MD, June 14-16, 2000.

Michelle Potts Steves and Amy Knutilla: "Collaboration Technologies for Global Manufacturing," To appear in the Proceedings of IMECE: International Mechanical Engineering Congress and Exhibition, November, 1999.

Michelle Potts Steves, Wo Chang and Amy Knutilla: "Supporting Manufacturing Process Analysis and Trouble Shooting with ACTS," In Proceedings of the IEEE 8th International Workshop on Enabling Technologies Infrastructure for Collaborative Enterprises (WETICE), June, 1999..

Michelle Potts Steves and Jean Scholtz: "Modified Field Studies for CSCW Systems," ACM's SIGGroup Bulletin, April, 1999.

Michelle Potts Steves and Don Libes: "Organization of MSID's On-Line information - Experience and Recommendations," NISTIR 5792, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Michelle Potts Steves and Peter Hart: "The MITT Electronic Library: Implementation Description," NISTIR 5656, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Stewart, Selden

Neil Christopher and Selden Stewart: "NAMT Fremework for Discrete Parts Manufacturing: Industrial Review Roundtable '96," NISTIR 5924, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

J. St. Pierre, Selden Stewart and K. Brady: "Conformance Testing and Specification Management," NISTIR 5879, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Selden Stewart and J. St. Pierre: "Experiences with a Manufacturing Framework," Proceedings of the OOPSLA'95 Business Objects Workshop, Springer-Verlag, London, 1996.

Selden Stewart and J. St. Pierre: "Roadmap for the Computer Integrated Manufacturing Application Framework," NISTIR 5679, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

J. Morell and Selden Stewart: "Standards Development for Information Technology: Best Practices for the United States," Harvard University, John F. Kennedy School of Government, June, 1994.

Selden Stewart and G. Pinholster: "Systems Integration Needs of U.S. Manufacturers," Journal of Research of the National Institute of Standards and Technology, Volume 99, No. 5, 1994, 687.

Su, Stanley

Stanley Su, A. Alashqur and H. Lam: "SQL: A Query Language for Manipulation Object-oriented Databases," Proceedings of the 15th International Conference on Very Large Data Bases, 1989.

Stanley Su, V. Krishnamurthy and H. Lam: "An Object-oriented Semantic Association Model, AI in Industrial Engineering and Manufacturing: Theoretical Issues and Applications(OSAM*)," American Institute of Engineers, 1988.

Stanley Su and A. Alashqur: "Uniform Treatment of Integrated CAD/CAM Data and Metadata," Proceedings of the First International Symposium on Computerization and Networking of Materials Properties Databases, November, 1987.

V. Krishnamurthy, Stanley Su, H. Lam, Mary Mitchell and Edward Barkmeyer: "A Distributed Database Architecture for an Integrated Manufacturing Facility," Proceedings of the Conference on Data and Knowledge Systems for Engineering and Manufacturing,, October, 1987.

Stanley Su and A. Kumar: "Modeling Partitioned and Replicated Databases Using an Extended Concept of Generalization," Proceedings of the COMPSAC '87 Conference, October, 1987.

Edward Barkmeyer, Mary Mitchell, K. Mikkilineni, Stanley Su and H. Lam: "An Architecture for Distributed Data Management in Computer Integrated Manufacturing," NBS Internal Report 3312, National Bureau of Standards, Gaithersburg, MD, 1986.

Stanley Su: "Modeling Integrated Manufacturing Data with SAM," IEEE Computer Magazine, January, 1986.

Sudarsan, Rachuri

Kevin Lyons, Ram Sriram, Rachuri Sudarsan and U. Roy: "Function-to-Form Mapping for Tolerance Synthesis: Part-II: Conceptual Design and Tolerance Synthesis," CAD/CAM Journal, August, 2000.

Rachuri Sudarsan and U. Roy: "Information Models for Design Tolerancing: From Conceptual to the Detailed Design," NISTIR 6524, National Institute of Standards and Technology, Gaithersburg, MD, 2000.

Rachuri Sudarsan, Yadati Narahari, Kevin Lyons, Michael Duffey and Ram Sriram: "Design for Tolerance of Electro-Mechanical Assemblies: An Integrated Approach," NISTIR 6223, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

Rachuri Sudarsan, Y. Narahari, Kevin Lyons and Michael Duffey: "Design for Tolerance of Electro-Mechanical Assembles," Proceedings of IEEE International Conference on Robotics and Automation, Lueven, Belgium, May 1998.

Szykman, Simon

Robert Allen, Ram Sriram, Simon Szykman and R. J. Fijol: "Representing an Artifact Transport System in a Design Repository: A Case Study," Proceedings of the ASME Design Engineering Technical Conference & Computers & Information in Engineering Conference, August, 2000.

Simon Szykman, Christophe Bochenek, J. W. Racz and Ram Sriram: "Design Repositories: Next-Generation Engineering Design Databases," IEEE Intelligent Systems and Their Applications, January, 2000.

Simon Szykman, Janusz Racz, Christophe Snowden and Ram Sriram: "Web-Based System for Design Artifact Modeling," Journal of Design Studies, January, 2000.

Craig Schlenoff, Peter Denno, Robert Ivester and Simon Szykman: "An Analysis of Existing Ontological Systems for Applications in Manufacturing," Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.14, No.4, January, 2000, 257-270.

Craig Schlenoff, Robert Ivester, Don Libes, Peter Denno and Simon Szykman: "An Analysis of Existing Ontological Systems for Applications in Manufacturing and Healthcare," NISTIR 6301, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

Simon Szykman, Ram Sriram, Christophe Bochenek and Janusz Racz: "The NIST Design Repository Project," Advances in Soft Computing - Engineering Design and Manufacturing, Roy, R., T. Furuhashi and P. K. Chawdhry (eds.), Springer-Verlag, London, 1999., July, 1998, pp.5-19.

Simon Szykman, J. Cagan and P. Weisser: "An Integrated Approach to Optimal Three Dimensional Layout and Routing," ASME Journal of Mechanical Design, Vol. 120, No. 3, 1998, pp.510-512.

Simon Szykman and Gerard Kim: "Combining Interactive Exploration and Optimization for Assembly Design," ASME Journal of Mechanical Design, Vol. 120, No. 1, 1998, pp.24-31.

Simon Szykman and Ram Sriram: "Internet-Based Delivery of CAD/CAM Capability: An Industry Case Study," Proceedings of the 1998 ASME Design Engineering Technical Conferences (18th Computers in Engineering Conference), Paper No. DETC98/CIE-5520, Atlant, GA, September, 1998, Vol. 120, No. 1.

Simon Szykman, Linda Schmidt and Harshawardhan Shetty: "Improving the Efficiency of Simulated Annealing Optimization Through Detection of Productive Search," Proceedings of 1997 ASME Design Engineering Technical Conferences (23rd Design Automation Conference), Paper No. DETC97/DAC-3980, Sacramento, CA, September, 1997.

J. William Murdock, Simon Szykman and Ram Sriram: "An Information Modeling Framework to Support Design Databases and Repositories," Proceedings of the 1997 ASME Design Engineering Technical Conferences (Design for Manufacturing Conference), Paper No. DETC97/DFM-4373, Sacremento, CA, September, 1997.

Simon Szykman and William Regli: "Network-Centric CAD: A Research Planning Workshop," Proceedings of Network-Centric CAD: A Research Planning Workshop, Gaithersburg, Maryland, December 3-4, 1996.

Simon Szykman: "Optimization as a Driver for Design Space Exploration," Proceedings of the 1997 Optimization in Industry, Palm Coast, Florida, March, 1997, pp.189-194.

Gerard Kim and Simon Szykman: "Combining Interactive Exploration and Optimization for Assembly Design," Proceedings of the 1996 ASME Design Engineering Technical Conferences and Computers in Engineering Conference (22nd Design Automation Conference), Paper No. 96-DETC/TAC-1482, Irvine, CA, August, 1996.

Simon Szykman: "Improving the Design Process by Predicting Downstream Values of Design Attributes," Proceedings of the 1996 ASME Design Engineering Technical Conferences and Computers in Engineering Conference (8th International Conference on Design Theory and Methodology), Paper No. 96-DETC/DTM-1520, Irvine, CA, August, 1996.

Cagan, J, Clark, R, Dastidar, P, Simon Szykman and Weisser, P: "HVAC CAD Layout Tools: A Case Study of University/Industry Collaboration," Proceedings of the 1996 ASME Design Engineering Technical Conferences and Computers in Engineering Conference (8th International Conference on Design Theory and Methodology), Paper No. 96-DETC/DTM-1505, Irvine, CA, August, 1996.

T

Thomas, Bruce

Brian Catron and Bruce Thomas: "Generic Manufacturing Controllers," Proceedings of the IEEE Conference on Intelligent Control, August, 1988.

Bruce Thomas: "Cell Controller Operations Manual," NBSIR 3789, National Bureau of Standards, Gaithersburg, MD, 1988.

Bruce Thomas: "A Scheme for Translating Control Flow in the C Programming Language to Grafacet with Examples," NBSIR 3741, National Bureau of Standards, Gaithersburg, MD, 1988.

Tu, J.

J. Tu and Ted Hopp: "Part Geometry Data in the AMRF," NBS Internal Report 3551, National Bureau of Standards, Gaithersburg, MD, 1987.

Tyler, Joan

Joan Tyler: "Models, Managing Models, Quality Models: An Example of Quality Management," NISTIR 4738, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Joan Tyler: "A Planning Model for Unifying Information Modeling Languages for Product Data Specification (PDES)," NISTIR 4234, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Howard Bloom, Cita Furlani, Mary Mitchell and Joan Tyler: "Information Resource Dictionary System: An Integration and Mechanism for Product Data Exchange Specification," NISTIR 3862, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

U

V

W

Wallace, Evan

Albert Jones, Evan Wallace and Y. Yih: "Monitoring and Controlling Operations," The Handbook of Industrial Engineering, March, 2000.

David Flater, Edward Barkmeyer and Evan Wallace: "Towards Unambiguous Specifications: Five Alternative Job Control Models for An Object-Oriented, Hierarchical Shop Control System," In Proceedings of the 1999 ASME Design Engineering Technical Conferences, Las Vegas, Nevada, CD-ROM file name Pdfs/Cie/9012.pdf., ASME Technical Publishing, September 1999..

Edward Barkmeyer, Peter Denno, Shaw Feng, Evan Wallace and Albert Jones: "NIST Response to MES Request for Information," NISTIR 6397, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

David Flater, Edward Barkmeyer and Evan Wallace: "State Models for Jobs and Job Supervisors," NISTIR 6037, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Edward Barkmeyer, Neil Christopher, Shaw Feng, James Fowler, Simon Frechette, Albert Jones, Kevin Jurrens, Charles McLean, Mike Pratt, Harry A. Scott, M. K. Senehi, Ram Sriram and Evan Wallace: "SIMA Reference Architecture Part I: Activity Models," NISTIR 5939, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Evan Wallace, P. Clements and K. Wallnau: "Discovering a System Modernization Decision Framework: A Case Study in Migrating to Distributed Object Technology," The IEEE International Conference on Software Maintenance, Monterey, CA, November, 1996.

K. Wallnau and Evan Wallace: "A Robust Evaluation of the Object Management Architecture: A Focused Case Study in Legacy System Migration," Proceeding of OOPSLA '96, San Jose, CA, October, 1996.

Sara Wallace, M. K. Senehi, Edward Barkmeyer, Steven Ray and Evan Wallace: "Manufacturing Systems Integration Control Entity Interface Specification," NISTIR 5272, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

M. K. Senehi, Edward Barkmeyer, Steven Ray and Evan Wallace: "Manufacturing Systems Integration Initial Architecture Document," NISTIR 4682, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

M. K. Senehi, Sara Wallace, Evan Wallace, Steven Ray and Edward Barkmeyer: "Manufacturing Systems Integration Control Entity Interface Document," NISTIR 4626, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Siefried Rybczynski, Edward Barkmeyer, Evan Wallace, M. Strawbridge, Don Libes and C. Young: "AMRF Network Communications," NBSIR 3816, National Bureau of Standards, Gaithersburg, MD, 1988.

Wallace, Sara

M. K. Senehi, Tom Kramer, J. Michaloski, R. Quintero, Steven Ray, W. Rippey and Sara Wallace: "Reference Architecture for Machine Control Systems Integration: Interim Report," NISTIR 5517, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

Sara Wallace, M. K. Senehi, Edward Barkmeyer, Steven Ray and Evan Wallace: "Manufacturing Systems Integration Control Entity Interface Specification," NISTIR 5272, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

M. K. Senehi, Sara Wallace and Mark Luce: "An Architecture for Manufacturing Systems Integration," Manufacturing International Conference, March, 1992.

M. K. Senehi, Sara Wallace, Evan Wallace, Steven Ray and Edward Barkmeyer: "Manufacturing Systems Integration Control Entity Interface Document," NISTIR 4626, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Wellington, Joan

Joan Wellington and Bradford Smith: "ISO TC 184/SC4 Reference Manual," NISTIR 5665, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Joan Wellington and Bill Conroy: "The IGES/PDES Organization (IPO) 1994 Annual Report," PRO Exchange, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

Joan Wellington: "The IGES/PDES Organization Document Tracking System," NISTIR 4707, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

Cita Furlani, Joan Wellington and Sharon Kemmerer: "Status of PDES-Related Activities," NISTIR 4432, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

Wenger, Carl

Carl Wenger: "Material Handling Workstation - Operator Manual," NBSIR 3785, National Bureau of Standards, Gaithersburg, MD, 1988.

Carl Wenger: "Material Handling Workstation, Recommended Technical Specifications for Procurement of Systems," NBSIR 3786, National Bureau of Standards, Gaithersburg, MD, 1988.

Carl Wenger: "Material Handling Workstation Implementors," NBSIR 3784, National Bureau of Standards, Gaithersburg, MD, 1988.

Charles McLean and Carl Wenger: "The AMRF Material Handling System Architecture," Proceedings of the Fifth Annual Control Engineering Conference, May, 1986.

Howard Bloom and Carl Wenger: "An Automated Documentation System for a Large-scale Manufacturing Engineering Research Project," Proceedings of the ACM SIGDOC 2nd International Conference on Systems Documentation, April, 1983.

Wilson, Peter

Peter Wilson: "On the Transition of KIF/Frame Ontologies to EXPRESS," NISTIR 5957, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

Peter Wilson: "LaTeX at MSID," NISTIR 5884, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

Peter Wilson: "EXPRESS: The International Standard Versus the Draft Standard," Proceedings of the 4th Annual EXPRESS Users Group Conference, Greenville, SC, October, 1995.

X

Y

Z

Send questions or comments to Webmaster.