image map MSID Highlights MSID Opportunities MSID Partners MSID Products MEL MSID Programs MSID Conferences MSID Search MSID Staff MSID Services MSID Standards MSID Publications NIST MSID MSID MSID
Publications

PUBLICATIONS by AUTHOR

PLEASE NOTE: The Publications System provided by the Manufacturing Systems Integration Division (MSID) has moved to: http://www.mel.nist.gov/msidlibrary/publications.html. The pages below are maintained for archival purposes only.

| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |

K

Katz, Susan

  • Susan Katz: "Configuration Management of the STEP Documents: Procedures and System Requirements," NISTIR 4629, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

  • Susan Katz: "Configuration Management Concepts Document," NISTIR 4538, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

  • Susan Katz: "STEP On-Line Information Service User's Guide," NISTIR 4491, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

  • Sandy Ressler and Susan Katz: "Development Plan: Configuration Management Systems and Services," NISTIR 4413, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

    • Kemmerer, Sharon

  • Sharon Kemmerer: "STEP: The Grand Experience," (Editor of) NIST Special Publication 939, National Institute of Standards and Technology, Gaithersburg, MD, 1999.

  • Sharon Kemmerer, Barbara Goldstein and P. Curts: "A Brief History of Early Product Data Exchange Standards," NISTIR 6621, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

  • Sharon Kemmerer: "Initial Manufacturing Exchange Specification (IMES), IMES Concept Document for Manufacturing Systems Integration," NISTIR 5978, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

  • Sharon Kemmerer: "Requirements and Recommendations for STEP Conformance Testing," NISTIR 4743, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

  • Cita Furlani, Joan Wellington and Sharon Kemmerer: "Status of PDES-Related Activities," NISTIR 4432, National Institute of Standards and Technology, Gaithersburg, MD, 1990.

    • Kim, Gerard

  • Ram Sriram, S.R. Gorti, A. Gupta, Gerard Kim and A. Wong: "An Object-Oriented Representation for Product and Design Processes," Journal of CAD, Volume 30, No. 7, April, 1998, 489 - 501.

  • Simon Szykman and Gerard Kim: "Combining Interactive Exploration and Optimization for Assembly Design," ASME Journal of Mechanical Design, Vol. 120, No. 1, 1998, pp.24-31.

  • Gerard Kim and Simon Szykman: "Combining Interactive Exploration and Optimization for Assembly Design," Proceedings of the 1996 ASME Design Engineering Technical Conferences and Computers in Engineering Conference (22nd Design Automation Conference), Paper No. 96-DETC/TAC-1482, Irvine, CA, August, 1996.

  • Gerard Kim, Gorti, S.R., Gupta, A., Wong, A. and Ram Sriram: "An Object-oriented Representation of Product and Design," Journal of Computer Aided Design, August, 1996.

  • Gerard Kim: "A Decision-based Framework for Exploring Assembly Configuration," Proceedings of the 95 Concurrent Engineering Conference, August, 1995.

  • Gerard Kim: "Comparative Assembly Planning for Assembly Design," Proceedings of the 95 IEEE International Symposium on Assembly and Task Planning, August, 1995.

    • Kirsch Russell

  • Russell Kirsch: "Development of Computers at the National Bureau of Standards," To appear in the NBS/NIST Classic Publication Volume, September, 2000.

  • J. Kirsch, Russell Kirsch and Sandy Ressler: "Computers Viewing Artists at Work," Proceedings of Syntactic and Structural Pattern Recognition, March, 1987.

  • Russell Kirsch: "Pictures as Primary Sources for Computer-Based Art History Data," Proceedings of the International Conference on Automatic Processing of Art History Data, September, 1984.

    • Knutilla, Amy

  • Robert Allen, Amy Knutilla and Michelle Potts Steves: "Workshop on Evaluating Collaborative Enterprises - Workshop Report," Proceedings of the IEEE Workshop on Enabling Technologies: Infrastructure for Collaborative Enterprises (WETICE), Gaithersburg, MD, June 14-16, 2000.

  • Michelle Potts Steves and Amy Knutilla: "Collaboration Technologies for Global Manufacturing," To appear in the Proceedings of IMECE: International Mechanical Engineering Congress and Exhibition, November, 1999.

  • Michelle Potts Steves, Wo Chang and Amy Knutilla: "Supporting Manufacturing Process Analysis and Trouble Shooting with ACTS," In Proceedings of the IEEE 8th International Workshop on Enabling Technologies Infrastructure for Collaborative Enterprises (WETICE), June, 1999..

  • Amy Knutilla, Craig Schlenoff and Steven Ray: "An Anaylis of Requirements for Specifying Manufacturing Engineering and Business Processes," NISTIR 6364, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

  • Amy Knutilla, Craig Schlenoff and Robert Ivester: "A Robust Ontology for Manufacturing Systems Integration," Proceedings of 2nd International Conference on Engineering Design and Automation, Maui, Hawaii, August 7-14, 1998.

  • Amy Knutilla, Craig Schlenoff, Steven Ray, Stephen T. Polyak, Austin Tate, Shu Chiun Cheah and Richard C. Anderson: "Process Specification Language: An Analysis of Existing Representations," NISTIR 6160, National Institute of Standards and Technology, Gaithersburg, MD, 1998.

  • Craig Schlenoff, Amy Knutilla and Steven Ray: "Proceedings of the First Process Specification Language (PSL) Roundtable," NISTIR 6081, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

  • Craig Schlenoff, Amy Knutilla and Steven Ray: "Requirements for Modeling Manufacturing Process: A New Perspective," Proceedings of Design Engineering Conferences, Sacremento, CA, September 1997.

  • Michael Gruninger, Craig Schlenoff and Amy Knutilla: "Using Process Requirements as the Basis for the Creation and Evaluation of Process Ontologies for Enterprise Modeling," ACM SIGGROUP Bulletin, Vol. 18, No. 3, August, 1997.

  • Craig Schlenoff, Amy Knutilla and Steven Ray: "Unified Process Specification Language: Requirements for Modeling Process," NISTIR 5910, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

    • Kramer, Tom

  • M. K. Senehi, Tom Kramer, J. Michaloski, R. Quintero, Steven Ray, W. Rippey and Sara Wallace: "Reference Architecture for Machine Control Systems Integration: Interim Report," NISTIR 5517, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

  • Tom Kramer and M. K. Senehi: "Feasibility Study: Reference Architecture for Machine Control Systems Integration," NISTIR 5297, National Institute of Standards and Technology, Gaithersburg, MD, 1993.

  • Tom Kramer, K.C. Morris and David Sauder: "A Structural EXPRESS Editor," NISTIR 4903, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

  • Tom Kramer: "The Library of Material Removal Shape Element Volumes (MRSEVs)," NISTIR 4809, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

  • Tom Kramer: "Issues Concerning Material Removal Shape Element Volumes (MRSEVs)," NISTIR 4804, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

  • Tom Kramer, M. Palmer and Allison Barnard Feeney: "Issues and Recommendations for a STEP Application Protocol Framework," NISTIR 4755, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

  • Tom Kramer: "Extracting STEP Geometry and Topology from a Solid Modeler: Parasolid-to-STEP," NISTIR 4577, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

  • Tom Kramer: "Pocket Milling with Tool Engagement Detection," none, 1991.

  • Tom Kramer: "The Off-Line Programming System (OLPS): A Prototype STEP-Based N-C Program Generator," none, 1991.

  • Tom Kramer: "Enhancements to the vws Data Preparation Software," NISTIR 4201, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

  • Tom Kramer: "Contour Outlines," NISTIR 4586, National Institute of Standards and Technology, Gaithersburg, MD, 1989.

  • Tom Kramer: "Automatic Generation of NC-Code for Hole Cutting with In-Process Metrology," Proceedings of the IEEE Instrumentation and Measurement Technology Conference, April, 1989.

  • Tom Kramer: "A Parser that Converts a Boundary Representation into a Features Representation," NBSIR 3864, National Bureau of Standards, Gaithersburg, MD, 1988.

  • Tom Kramer: "The Graphics Subsystem of the Vertical Workstation of the Automated Manufacturing Research Facility of the National Bureau of Standards," NBSIR 3783, National Bureau of Standards, Gaithersburg, MD, 1988.

  • Tom Kramer: "Process Planning for a Milling Machine From a Feature-Based Design," Proceedings of AMSE Manufacturing International, April, 1988.

  • Tom Kramer: "Data Handling in the Vertical Workstation of the Automated Manufacturing Research Facility at the National Bureau of Standards," NBSIR 3763, National Bureau of Standards, Gaithersburg, MD, 1988.

  • Tom Kramer: "The vws_cadm User Interface in the Vertical Workstation of the Automated Manufacturing Research Facility at the National Bureau of Standards," NBSIR 3738, National Bureau of Standards, Gaithersburg, MD, 1988.

  • Tom Kramer and R. Weaver: "The Data Execution Module of the Vertical Workstation of the Automated Manufacturing Research Facility of the National Bureau of Standards," NBSIR 3704, National Bureau of Standards, Gaithersburg, MD, 1988.

  • Tom Kramer and J. Jun: "The Design Protocol, Part Design Editor, and Geometry Library of the Vertical Workstation of the Automated Manufacturing Research Facility at the National Bureau of Standards," NISTIR 3717, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

  • Tom Kramer and W. Strayer: "Error Prevention and Detection in Data Preparation for a Numerically Controlled Milling Machine," NISTIR 3677, National Institute of Standards and Technology, Gaithersburg, MD, 1987.

  • Tom Kramer: "Process Plan Expression, Generation, and Enhancement for the Vertical Workstation Milling Machine in the Automated Manufacturing Research Facility at the National Bureau of Standards," NBS Internal Report 3678, National Bureau of Standards, Gaithersburg, MD, 1987.

  • Tom Kramer and J. Jun: "Software for an Automated Machining Workstation," Proceedings of the International Machine Tool Show Technical Conference, September, 1986.

  • Tom Kramer: "Integrated Automated Manufacture of Metal Parts," Proceedings of the IEEE National Aerospace & Electronics Conference, May, 1986.

  • Tom Kramer: "Automated Analysis of Operators on State Tables: A Technique for Intelligent Search," Journal of Automated Reasoning, 1986.

    • Krishnamurthy, V.

  • Stanley Su, V. Krishnamurthy and H. Lam: "An Object-oriented Semantic Association Model, AI in Industrial Engineering and Manufacturing: Theoretical Issues and Applications(OSAM*)," American Institute of Engineers, 1988.

  • V. Krishnamurthy, Stanley Su, H. Lam, Mary Mitchell and Edward Barkmeyer: "A Distributed Database Architecture for an Integrated Manufacturing Facility," Proceedings of the Conference on Data and Knowledge Systems for Engineering and Manufacturing,, October, 1987.

    • Kumar, A.

  • Stanley Su and A. Kumar: "Modeling Partitioned and Replicated Databases Using an Extended Concept of Generalization," Proceedings of the COMPSAC '87 Conference, October, 1987.

    • Send questions or comments to Webmaster.