image map MSID Highlights MSID Opportunities MSID Partners MSID Products MEL MSID Programs MSID Conferences MSID Search MSID Staff MSID Services MSID Standards MSID Publications NIST MSID MSID MSID
Publications

PUBLICATIONS by AUTHOR

PLEASE NOTE: The Publications System provided by the Manufacturing Systems Integration Division (MSID) has moved to: http://www.mel.nist.gov/msidlibrary/publications.html. The pages below are maintained for archival purposes only.

| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |

H

Han, Jung-Hyun

  • Jung-Hyun Han, Mike Pratt and William Regli: "Manufacturing Feature Recognition from Solid Models: A Status Report," IEEE Trans. on Robotics and Automation (2000), June, 2000.

  • Jung-Hyun Han: "On Multiple Interpretations," Proceedings of ACM Solid Modeling Symposium, Atlanta, GA, May 14-16, 1997.

    • Hart, Peter

  • Kevin Lyons, Peter Hart, Steven Shooter and Walid Keirouz: "The Open Assembly Design Environment Project: An Architecture for Design Agent Interoperability," Proceedings of ASME Design Engineering Technical Conference, Las Vegas, NV, September 1998.

  • Kevin Lyons, Peter Hart, Sankar Jayaram, Yong Wang and Uma Jayaram: "A Virtual Assembly Design Environment," Proceedings of IEEE Virtual Reality '99 Conference, Houston, TX, March 13-17, 1999.

  • Michelle Potts Steves and Peter Hart: "The MITT Electronic Library: Implementation Description," NISTIR 5656, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

    • Hopp, Ted

  • Lisa Carnahan, Gary Carver, Martha Gray, Mike Hogan, Ted Hopp, Jeffrey Horlick, Gordon Lyon and Elena Messina: "Metrology for Information Technology (IT)," NISTIR 6025, National Institute of Standards and Technology, Gaithersburg, MD, 1997.

  • Ted Hopp: "Representation of Axes for Geometric Fitting," NISTIR 5897, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

  • Ted Hopp and C. Reeve: "An Algorithm for Computing the Minimum Covering Sphere in Any Dimension," NISTIR 5831, National Institute of Standards and Technology, Gaithersburg, MD, 1996.

  • Ted Hopp and M. S. Levenson: "Performance Measures for Geometric Fitting in the NIST Algorithm Testing and Evaluation Program for Coordinate Measurement Systems," NIST Journal of Research, September, 1995.

  • Ted Hopp: "User's Guide to "SuperFit" Modeling Software for CMM Probe Lobing," NISTIR 5720, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

  • Edward Barkmeyer, Ted Hopp, Mike Pratt and Gaylen Rinaudot: "Background Study: Requisite Elements, Rationale, and Technology Overview for the Systems Integration for Manufacturing Applications (SIMA) Program," NISTIR 5662, National Institute of Standards and Technology, Gaithersburg, MD, 1995.

  • Cathleen Diaz and Ted Hopp: "Evaluation of Software for Coordinate Measuring Systems," Proceedings of the 1995 SEM Clinic, June, 1995.

  • Ted Hopp: "The Sensitivity of Three-Point Circle Fitting," NISTIR 5501, National Institute of Standards and Technology, Gaithersburg, MD, 1994.

  • Cathleen Diaz and Ted Hopp: "Testing of Coordinate Measuring System Software," Proceedings of the 1994 NCSL Workshop & Symposium, Chicago, IL, July, 1994.

  • Ted Hopp: "Computational Metrology," Manufacturing Review, Volume 6, Number 4, December, 1993.

  • Ted Hopp: "The Language of Tolerances," Proceedings of the Indo-U.S.-Japanese Conference on Quality through Engineering Design, January, 1993.

  • Mary Beth Algeo and Ted Hopp: "Form Error Models of the NIST Algorithm Testing System," NISTIR 4740, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

  • J. Hsu, T. Hsu, J. Filliben and Ted Hopp: "A Comparative Study of CMM Flat-Surface Inspection Plans," NISTIR 4897, National Institute of Standards and Technology, Gaithersburg, MD, 1992.

  • Shaw Feng and Ted Hopp: "A Review of Current Geometric Tolerancing Theories and CMM Inspection Data Analysis Algorithm," NISTIR 4509, National Institute of Standards and Technology, Gaithersburg, MD, 1991.

  • Ted Hopp: "The Mathematics of Datums," ASPE Newsletter, American Society of Precision Engineering, September, 1990.

  • K. Bowman, Ted Hopp, R. Kacker and R. Lundegard: "Statistical Quality Control Technology in Japan--A Report for the Office of Naval Research," The Scientific Information Bulletin, March, 1990.

  • Ted Hopp and C. Reeve: "An Algorithm for Computing the Minimum Covering Sphere in any Dimension," SIAM Journal of Computing, 1989.

  • Howard Moncarz, Ted Hopp and P. Leazark: "Implementation of the Coordinate Measuring Machine Controller," NISTIR 3874, National Institute of Standards and Technology, Gaithersburg, MD, 1988.

  • Ted Hopp: "AMRF Database Report Format: Part Model," NBS Internal Report 3672, National Bureau of Standards, Gaithersburg, MD, 1987.

  • J. Tu and Ted Hopp: "Part Geometry Data in the AMRF," NBS Internal Report 3551, National Bureau of Standards, Gaithersburg, MD, 1987.

  • Ted Hopp, D. Swyt and T. Carlton: "Quality Control in Automated Manufacturing," Proceedings of the Measurement Science Conference, January, 1986.

  • Ted Hopp: "CAD-Directed Inspection," 14th CIRP General Assembly, August, 1984.

  • Ted Hopp and K. Lay: "A Hierarchical Model-Based Control System for Inspection," First International Symposium in Automated Integrated Manufacturing, April, 1983.

  • Charles McLean, Howard Bloom and Ted Hopp: "The Virtual Manufacturing Cell," Proceedings of the IFAC/IFIP Conference on Information Control Problems in Manufacturing Technology, October, 1982.

    • Send questions or comments to Webmaster.