MEL National Institute of Standards and Technology
MSID Home About MSID MSID Highlights MSID Programs MSID Products and Tools MSID Publications MSID Staff MSID Search


MSID...In the News

Who are we and how can we help you? Listed below are various press releases, articles, and news items describing our work and how it impacts you and your community.

"By selecting the links below, you will be leaving NIST webspace. We have provided these links to other web sites because they may have information that would be of interest to you. NIST does not endorse any commercial products that may be mentioned on these sites. Please address comments about this page to webmaster@cme.nist.gov."

primary bullet

Word/Logic Bank to Help Build ‘Thinking’ Machines - (Science Blog, May 2008)
primary bullet

U.S. Plan for "Thinking Machine" Repository - (Slashdot, May 2008)
primary bullet

Word/Logic Bank to Help Build ‘Thinking’ Machines - (NIST Tech Beat, May 2008)
primary bullet

Sharing, Not Panicking - (Interview provided by Federal News Radio, April 2008) "The National Institutes of Standards and Technology is holding a workshop that looks at how agencies would share information in the event of an emergency. It's the Collaborative Expedition Workshop in Maryland -- and it happened today. Josh Lubell works in NIST's Manufacturing Systems Integration Division and talks to us about some possible solutions." To listen to the interview, please choose from the following files: MP3      WMA
primary bullet

Viewpoint: Steven Ray on Information Standards in Manufacturing - (Int. J. Product Lifecycle Management, Vol. 2, No. 3, 2007)

primary bullet

An Intrepid Guide to Ontologies - (Michael K. Bergman, AI3, May 2007)

primary bullet

Ontology Summit 2007 Communiqué - (Commergence, May 2007)

primary bullet

SME Names Top Young Leaders in Manufacturing Engineering - (Industry Week, May 2007)
primary bullet

Ontolog Drawings and Science Maps - (Accuracy & Aesthetics , April 2007)
primary bullet

Interoperability Week 2007 (French) - (Bulletins Electroniques, April 2007)
primary bullet

You got your folksonomy in my ontology! - (GCN, April 2007)
primary bullet

Inspection Planning for Metrology Interoperability - (Manufacturingtalk.com, March 2007)
primary bullet

Ontology Summit 2007: Ontology, Taxonomy, Folksomony Distinctions - (Citizens Party , March 2007)
primary bullet

Ontologies - (Knowledge Management Tools, Februrary 2007, NOTE: See page 4 for Interoperability Week 2006 coverage)
primary bullet

Tool Helps Write Rules for XML Communication - (NIST Tech Beat, December 2006)
primary bullet

Systems Engineering Modeling Language Becomes a Standard - (NIST Highlight, August 2006)
primary bullet

The Language of Shapes - (Portland's Daily Journal of Commerce, July 2006)
primary bullet

Expert Voices- (CIO Insight, July 2006)
primary bullet

Modern Relics - NIST and others work on how to preserve data for later use - (Government Computer News, Volume 25, Issue No. 16, June 2006)
primary bullet

Shared Theories on Thought Could Lead to Smart Machines - (Lockergnome, May 2006)
primary bullet

Shared Theories on Thought Could Lead to Smart Machines - (ScienceDaily.com, May 2006)
primary bullet

Teaching Computers Common Sense - (Scenta.co.uk, May 2006)
primary bullet

Shared Theories on Thought Could Lead to Smart Machines - (Physorg.com, May 2006)
primary bullet

Shared Theories on Thought Could Lead to Smart Machines - (NIST Tech Beat, April 2006)
primary bullet

NIST's Upper Ontology Summit Considered "A Watershed for the Semantic Web" - (dataWarehouse.com, April 2006)
primary bullet

MSID Staff Publications Make Top 25 List - (Science Direct, April 2006)
primary bullet

Interoperability Will Improve Healthcare - (Government Health IT, March 2006)
primary bullet

NIST Conference to Focus on Interoperability - (EETimes.com, March 2006)
primary bullet

Feds Can Spur Use of Interoperability Standards - (Federal Computer Week, March 2006)
primary bullet

Interoperability Will Improve Health Care - (Government Health IT, March 2006)
primary bullet

Interoperability Standards Event Set for March 13-17, 2006 - (NIST Tech Beat, March 2006)
primary bullet

Helping Small Firms Run Large Supply Chains - (NIST Tech Beat, January 2006)
primary bullet

Found In Translation - (IEEE Intelligent Systems, December 2005)
primary bullet

American Standard - How NIST is Pursuing Simulation Standardization (The Manufacturer US, September 2005)
primary bullet

Experts to Examine Virtual Enterprise Uses of Info Tech - (NIST Tech Beat, September 2005)
primary bullet

NIST Develops 'Toolbox' for Manufacturing Systems - (NIST Tech Beat, August 2005)
primary bullet

NIST’s et.gov Site Opens Up New Frontiers - (Government Computer News, July 2005)
primary bullet

Computers Get The Meaning - (Information Week, June 2005)
primary bullet

High-Speed CMM Scanning...Really - (Quality Digest, June 2005)
primary bullet

NIST Focuses on Measurements for New IT Technologies - (FCW.COM, May 2005)
primary bullet

Metrology Guidelines - Dimensional Markup Language (DML) Developed - (Manufacturing Engineering, May 2005, Vol. 134, No. 5)
primary bullet

Disruptive Technologies: Semantic Web - (Managing Automation, April 2005)
primary bullet

Standards Demo: 6 Software Packages Operate 3 CMM - (Control Engineering, April 2005)
primary bullet

AIAG's Metrology Interface Specification Could Save Industry Hundreds of Millions of Dollars - (AIAG Press Release, April 2005)
primary bullet

Helping Future Engineers Use Today's Design Plans - (NIST Tech Beat, February 2005)
primary bullet

Capital Facilities Industry Joins the Information Revolution - NIST Tech Beat, October 2004)      See also - FIATECH AEX Project Publishes Version 1.0 of XML Schemas for Capital Facilities Equipment - (FIATECH Press Release, July 2004)
primary bullet

Lack of Supply Chain Standards Costing Billions of Dollars - (NIST Tech Beat, July 2004) - View the report, Economic Impact of Inadequate Infrastructure for Supply Chain Integration.
primary bullet

Manufacturing Starts the Big Turn-Around - (Diversity/Careers in Engineering and Manufacturing Technology, May 2004)
primary bullet

Lean, Green & Smart - (Industry Week, May 2004) - PDF
primary bullet

Standardizing Disaster Models to Help First Responders - (NIST Tech Beat, February 2004)
primary bullet

PDES, Inc. Selects Brad Rigdon Technical Management Award Winner -- Simon Frechette - (PDES, Inc., October 2003)
primary bullet

Automotive Industry Action Group Interoperability Project to Reduce Auto Industry Costs by $255M - (Automotive Industry Action Group [AIAG], June 2003)
primary bullet

NIST Study Shows Industries Taking a Big STEP to Savings - (NIST News Release, December 2002) - View the report, Economic Impact Assessment of the International Standard for the Exchange of Product Model Data (STEP) in Transportation Equipment Industries.
primary bullet

Software Errors Cost U.S. Economy $59.5 Billion Annually - (NIST News Release, May 2002) - View the report, Economic Impacts of Inadequate Infrastructure for Software Testing.
primary bullet

Lost in Translation: $1 Billion - (NIST News Release, April 1999) - View the report, Interoperability Cost Analysis of the U.S. Automotive Supply Chain.


Send questions or comments to Webmaster.
Date Created: June 16, 2004
Last Modified: May 29, 2008

Manufacturing Engineering Laboratory Skip Navigation